I just had the same problem with my b6ac+ unit, never had an issue before but 2 lipo batteries (in storage state) both had the connection break error? So, I quickly made up a deans extension and low and behold they both now charge? So bizarre? Such a great fix and cost me nothing as I had all the kit needed to make the extension lead. Great video! Thank you 😊
@audiestri8424
2 жыл бұрын
i had same problem only with 1 lipo battery. Extending power wires was helpful. thank you.
@graham8377
3 жыл бұрын
You’re the best! Thank you for the solution. Looking forward to more videos. Keep it up.
@kittyhawk9886
Жыл бұрын
There are multiple issues relating to the connection break condition. The most basic being the connector to battery - resolve using a new connector. The other rare one is a dry joint in the charger board. There needs to be connectivity between the top of board positive and bottom board positive - fix by reflowing solder to ensure connectivity for positive rail to main board. Other problem is blown mosfets. Easy fix. Replace mosfets. This is a fantastic charger.
@dailydronejourney
Жыл бұрын
nice info, thanks..
@dailydronejourney
Жыл бұрын
Thanks for share, I will try..
@carloscavazos1991
2 жыл бұрын
cuantos centimetros mide la extension que le pusiste amigo?
@Best_RC
6 ай бұрын
The extension is about 15cm
@Best_RC
6 ай бұрын
Olá amigo, The extension is about 15cm
@Steve211Ucdhihifvshi
2 жыл бұрын
its a problem with the cheap shit mofset chip on the back and power regulator. just cheap chinese junk
@krodyssey4770
3 жыл бұрын
So you just have to extend the wires
@Best_RC
3 жыл бұрын
Yes, that seems to work 🙂
@Best_RC
3 жыл бұрын
Please note, I had this issue only with x1 lipo battery (3s). My charger act "normal" with my other lipo batteries. Let me know if that resolved your issue
Пікірлер: 13