I can NOT Thank YOU Enough FOR THIS Video ! Stroke recovery this is my Therapy 4 LIFE Proud 61 & 25 LX Owner !
@NektarTechnology
Жыл бұрын
Glad you found it useful!
@shivnathan8396
7 жыл бұрын
Wow Excellent and very informative ... I was in confusion between LX49+ and another brand but now I'm gonna get this one ..... thank you very much Nektar technology
@kloakovalimonada
3 жыл бұрын
I have this board for years and I had no idea I can control this much stuff.
@magick1969
5 жыл бұрын
By the way, if you delete the Control Surface entries in Logic Pro X for the Impact LX+ (I'm on the 88) and then close that view, then go Logic -> Control Surfaces -> Rebuild defaults, and then make sure USB Cable is out either into a USB Hub or directly into the Mac and then say select Mixer by pressing Mixer on the keyboard, you will be able to control several inputs from this Mixer immediately within Logic Pro X. By default that's 9 channel mixes including 1 for Master. I have no idea say if you had 2 or more synth plugins controlled by the Nektar that each it maps automagically for all your bus/aux routing. That's something to learn I suppose or perhaps it does I haven't gotten that far. For myself, I have Midi Out from the Nektar to Midi In on the Clarett 4Pre USB along with the USB that's necessary to control the switches into a 4 port HUB.
@realguitarshredder
5 жыл бұрын
none of this is working for me. I just bought lx61 and besides the actualy keys none of the buttons are working with logic pro x.. what am I doing wrong. scenes, clips buttons dont work they dont light up either
@toprakozcan
5 жыл бұрын
are you using a hackintosh?
@PrashantGijare
5 жыл бұрын
Did you use the DAW integration? It is available under the Overview page in My Account.
@matiasmoulin2126
4 жыл бұрын
I had problems too with Logic. This helped for me: Troubleshooting If the controls/keys on your Impact iX, GX, LX or LX+ are behaving unusually or simply not working try this fix Close any applications you have open Open a Finder window Open the 'Go' menu at the top of the screen Select 'Go to folder...' Type ~/Library/Preferences Click 'Go' Find com.apple.logic.pro.cs and move it to the trash Empty the Trash In the Finder go to //Applications/Nektar/LX49 or //Applications/Nektar/Apple Run the uninstaller located in that directory Restart your computer Start Logic and create an empty project (this is just so Logic creates a new cs file) Quit Logic Run the latest installer (the latest installers can always be found the in the 'My Downloads' section of the Support page) Start Logic again You should now be able to control Logic's mixer from Mixer Mode, the instrument on the currently selected track in Instrument Mode and Smart Control parameters in Preset Mode. If your Impact LX keyboard is detected in Logic but control surface functions are not working, check the USB Port Setup Mode: Press the [Setup] button on your Impact keyboard (hold [Shift/Mute] and [Patch>] (Setup), if you have an LX+) Press the A2 key on the keyboard The display should say '0.0.1.' if you are using an original Impact LX, it should say '0.0.2.' if you have an LX+. If the display says '0.0.0.', change it by pressing the C#-key with + above it. If you are using an Impact LX25 or LX25+, you will need to press the C3 key (labeled 'Enter') before you can change this setting. If you continue to have trouble, please contact support.
@toprakozcan
4 жыл бұрын
@@trmus im also using a hackintosh, and i wondered if he does too. I had the same issue back then. Chill dude :D
@majoriteten
4 жыл бұрын
@@toprakozcan it's working perfectly fine with my hackintosh
@sigitventilasi
6 жыл бұрын
Nektar LX 61 is a bestbuy!!! Works great with Logic and Mainstage...
@kpax9852
5 жыл бұрын
any idea how to do more than 8 marker scenes?
@kkm5758
7 жыл бұрын
I have a little prob. I managed to setup my LX49+ successfully with Logic and it was working great, now when I press the "mixer" button, the panel doesn't pop up. The faders work and the knobs all work perfectly but the mixer window doesn't populate in logic I factory reset The LX and reinstalled the drivers, it's just the mixer window doesn't pop up. Everything else works LIKE A CHARM. So it must be something I did. Any ideas?
@BlackBrothers84
7 жыл бұрын
Yo i am having a similar issue!! Did u ever figure it out? I tried to map it and im having so many problems smh
@anthonyharold666
6 жыл бұрын
Kyle M brothers u guys r lucky. I'm new.. I am not able to map the knobs
@MO-fb8oh
4 жыл бұрын
Is it possible to adjust a knob to several different plugins? For example, sometimes I would like to use the knobs on a compressor, sometimes I would like to use them on a equalizer
@NektarTechnology
4 жыл бұрын
Yes. The LX+ Logic integration will control whichever instrument plugin is on the current track and you can either use our default mapping or create your own for each instrument. You can also control Smart Controls which can be a mix of instrument and effect parameters. The Nektar Logic integration isn't set up to control the complete Logic channel strip (as is the case with Panorama) but you can always use the Preset mode to learn parameters for effects plugins as well.
@calebparkermusic
4 жыл бұрын
I'm trying to assign the faders to control midi CC like vibrato, mod, and expression, but with no luck. How can I do this?
@sargelovesscout8336
Жыл бұрын
Is there a tutorial that sets up the LX61+? In this video you assume that the keyboard is already setup...
@NektarTechnology
Жыл бұрын
Once you have run the Nektar LX+ Logic support installer, Logic should automatically detect the ports of the LX61+ on startup. Assuming you are running the latest version of Logic (10.6 or higher) that's more or less what the steps in the pdf guides provides. There is also a trouble shooting step which in some cases is necessary: : • Open the ‘Logic Pro’ menu at the top left part of your screen and selected ‘Control Surfaces/Preferences’. • In the window that appears, select the ‘MIDI Controllers’ tab. (see image below) • Check the box in the ‘Auto’ column for your Impact LX+ controller. Hope that's the answer.
@fusionistaaaa
3 жыл бұрын
Quite disappointed, my knobs dont match the parameters on the native Logic synth, user led doesn't light or work either. I bought it specifically to use with Logic Pro 10.4 to control instrumenets and have basic functions like Undo and Track / Patch.
@NektarTechnology
3 жыл бұрын
Hi Frank! Sorry to read about your troubles. Those features definitely should work. One thing to keep in mind with patch changes is, that it only works if the patches are handled by Logic, not the plugin. I can't tell from your message, if you have downloaded and installed the Nektar DAW integration yet? If you haven't, that would be the easy explanation. You'll find that in your Nektar user account. Here's the link to the setup & troubleshooting page: nektartech.com/logic-setup-and-troubleshooting-impact/ Link to the user guide for your integration: support.nektartech.com/Downloads/Impact_Guides/Using_Impact_LX_with_Logic.pdf If you need technical help, please get in touch with support, we'll help you to get this going! :) Here's the link: nektartech.com/support/
@burningstar3466
4 жыл бұрын
this is sikk. I just ordered this beast
@kkm5758
7 жыл бұрын
Can you use the knobs to control the pan parameter? So you could use the sliders for volume and the knobs for panning back and forth when you mix?
@NektarTechnology
7 жыл бұрын
Yes correct. When you select Mixer mode that's how they are assigned. The fader buttons in turn control mute.
@kkm5758
7 жыл бұрын
NektarTechnology thanks for the reply! I'm literally sitting here with my brand new LX49 still on its box.
@kkm5758
7 жыл бұрын
It came with some synth VST called VMI synth Legacy, will it control that too?
@NektarTechnology
7 жыл бұрын
If you received the UVI Synth Legacy, yes Impact LX can control it but there is unfortunately some setup. The UVI product does not activate host automation parameters by default and we need those to be active to control them. Activating them is easy enough. You right-click on the parameter in the UVI GUI and select the menu to enable host parameter. You'll have to do that for every parameter and unfortunately it's not a global setting so you have to save it for each preset. Another option is to use our Preset mode and then assign them via MIDI learn. But for most other plugins you should have to do this.
@kkm5758
7 жыл бұрын
NektarTechnology awesome thanks for the advice I can't wait to dive into this stuff with logic
@shayansaravi2363
5 жыл бұрын
hey guys!i've just bought lx88+.and i have the problem to sync the buttons(cut off,lfo.resonance & anything) with the logic.everytime i should change them my mouse on laptop.how can i sync them together?..
@NektarTechnology
5 жыл бұрын
shayan saravi - Hi There! Sorry to hear about your setup troubles. We can’t do support properly in these KZitem comments, so please always get in touch with support directly in cases like this. 😊 Here’s the link for you: support.nektartech.com/s.nl/it.I/id.57/.f
@augmentedkeys5971
6 жыл бұрын
Will the Impact LX88 be fully functional and integrated with Ableton Live on a Mac?
@NektarTechnology
5 жыл бұрын
Hi David! Missed this one... sorry! We don't have something as comprehensive as for Cubase, Reason, Logic or the others on our DAW list, but here's a link to a page where you can see what's possible at the moment: support.nektartech.com/s.nl/ctype.KB/it.I/id.2429/KB.746/.f
@piryudnoerase3515
7 жыл бұрын
I ordered an lx 61 and im looking forward to use it at church... do you actively reply on comments?
@NektarTechnology
7 жыл бұрын
We sure do! Excellent - we hope you are having a good experience with our controller. :) Best from Nektar...
@stellar808
7 жыл бұрын
This is very helpful.
@gokulv.k.2347
4 жыл бұрын
Could you please upload a Tutorial for Nectar Impact Integration with Protools?????
@matiasmoulin2126
4 жыл бұрын
The longer I use the LX 25+ with Logic Pro, the more frustrated I get. It actually doesn't work as advertised. For Logic, I mean. Maybe this isn't Nektars fault, since Logic has always been a nightmare with Midi, but in this case it is no difference. One has to be a Midi expert to use this keyboard, there is so much potential to mess things up. I am now re-installing the firmware for maybe the 20th time. Most irritatingly: when assigning CC to the "User Page", it gets messed up sooner or later and stops working. The function disappears and only returns after complete reinstall of the firmware and the cs file. And after that, of course, all former assignments are gone. I stopped counting how many times I reassigned my plugins. And btw. it crashes Logic way too often. The User Page function was the main reason for me to buy the Nectar because I wanted the option to assign more than 8 knobs. That's quite a disappointment. Maybe the time is not right yet for a flawless Logic integration. Or you certainly should come up with something like a firmware update.
@rev-da-super-empath
6 жыл бұрын
is there an updated driver? I just bought my impact lx61+ and the transport control as well as faders and knobs aren't doing anything in logic pro! Im using Logic 10.4.1 with High Sierra 10.13.4
@NektarTechnology
6 жыл бұрын
Dear Shane! Please go to our website, log into your account and download the files there. In order for Logic to be controlled, you need to install our Integration software. If you have done so already, and still experience problems, please contact support. Here's the link: support.nektartech.com/s.nl/it.I/id.57/.f
@anthonyharold666
6 жыл бұрын
Y does the keyboard turn off while recording ..it sucks with logic
@NektarTechnology
6 жыл бұрын
If you are experiencing that the keyboard suddenly disconnects from your Mac, it's unfortunately most likely to be a computer power problem. There are a few things you can do to resolve the situation on your system and we have described them here: www.nektartech.com/s.nl/ctype.KB/it.I/id.8820/KB.746/.f?category=25
@BadlenzTv
8 жыл бұрын
upload fl studio controling
@Aleredes
7 жыл бұрын
can I use this controller in Mainstage?
@NektarTechnology
7 жыл бұрын
Hi! You can use the controller with any MIDI application in "standard" operation, but dedicated support is only available in our Panorama products. We have a nifty little table on our product page, that tells you which apps we support with custom mapping (please scroll down): www.nektartech.com/impact-lx49-61-plus.html
@Aleredes
7 жыл бұрын
Thank u!
@iamyourfuture808
7 жыл бұрын
Cyndi lauper ?
@tattoobillyvon9764
6 жыл бұрын
Just got one I also have the p4
@magick1969
5 жыл бұрын
All PDF docs here: support.nektartech.com/s.nl/ctype.KB/it.I/id.8698/KB.746/.f?category=25
@thefilmandmusic
4 жыл бұрын
Mines not working either,
@NektarTechnology
4 жыл бұрын
The most common issue is a corrupt Logic preference file. Try the troubleshooting steps on this page here: nektartech.com/logic-setup-and-troubleshooting-impact/
@hasanhejazi4831
7 жыл бұрын
I get that they use simple tracks to show us how to USE the controller but why does it have to be trash? its so annoying having to listen to basic tunes with every single tutorial for every single midi controller out there. out some effort into the art.
@coltranearmour9904
7 жыл бұрын
exactly what i was just thinking
@tattoobillyvon9764
6 жыл бұрын
Hasan Hejazi if not you run into copyright bullshit
@magick1969
5 жыл бұрын
Straight up troubleshoot to get the controller set up fully: support.nektartech.com/s.nl/ctype.KB/it.I/id.8672/KB.533/.f?category=26
Пікірлер: 59