I just bought a boat with a 350 and couldn’t find any info on how to change the impeller, this is much easier than the impellers I used to change on the 351W. Thank you for the vid!
@dougschell1320
Ай бұрын
Bump your ignition over wiggle & pull or jam a screw diver on each side, and it will pop out
@jwdundon
Ай бұрын
The OLD one sidnt look shot?????
@alacart5959
2 жыл бұрын
Get it… don’t let it get you!
@miceline2001
2 жыл бұрын
Nunca hacer eso de usar un destornillador para hacer palanca,se muesca la beba y a comprar una nueva,usar dos pinzas tirando de las aletas opuestas del impeller,y con paciencia sale bien
@joelsampson7454
3 жыл бұрын
One update to this. You can use two screwdrivers or paint openers to pry the impeller out. They work really well.
@adrianred236
3 жыл бұрын
And remember, never force it, use a bigger hammer!!
@gdb2517
2 жыл бұрын
Hi. I have the 350 5.7 inmar. Question….. im having issues it turning over. After being out in the water my transmission line to the the transmission unscrewed off. I felt the tranny skip so I stopped it. What happen after I got it to the ramp was it would not turn over again. So after adding the tranny fluid now back at the ramp I hear the starter clicking rapidly but it would not turn the engine. I took the starter to get tested and it passed 3 times. I then changed the ignition coil and still nothing. Also battery is fully charged and connections are tight. Thoughts?? Something im missing? I even looked at the ignition breaker but not sure how to test that. Thanks?
@joelsampson7454
Жыл бұрын
Sorry. I did not see this. There is a starter relay under the plate the computer sits on. It’s probably weak. Mine went out a couple years ago. Either that or a bad connection somewhere. I also had the eyelet at the starter break. It was still touching, so sometimes worked.
@Alpha-to9od
Жыл бұрын
Take that sh!t out and use an electric pump.... That is A poor design from Volvo...
Пікірлер: 10