Roadside RC will always steer you in the right direction. 😁 👍👍
@RoadsideRC
2 жыл бұрын
Ha! Nice one.
@bsbigrcadventures2089
2 жыл бұрын
Nice video every video you post is halpfull to all us rc fans good job 👍👍
@RoadsideRC
2 жыл бұрын
Thank you!
@RcNickster709
2 жыл бұрын
Yup Obviously a big difference. Nice work troy Thanks for sharing
@RoadsideRC
2 жыл бұрын
Thanks for watching!!
@JoseTorres-fn1vk
2 жыл бұрын
Nice dod
@RoadsideRC
2 жыл бұрын
Thanks!
@RCRoads
Жыл бұрын
I really like your scientific approach when setting up crawlers. I have been doing some mods on mine as well and the steering is not the best. I might get some upgraded axils for mine some day but for now I'm just going to bash it around and see what breaks. I would kind of like to see how it could preform as a monster truck but it's definitely not an LMT. Bone stock it's a great value and preforms good for someone like me who has never owed a crawler. The best part is that it's a truck that is so easily modified. Again great job on all your videos.
@RoadsideRC
Жыл бұрын
Thank you for the kind words! Good luck with your build.
@JonnieB.
2 жыл бұрын
Great content as always. I have been eyeing that servo for my granite voltage, which I actually bought as my first hobby grade from your review. You have really been pumping out the content lately. Thanks for working so hard for all of us!
@RoadsideRC
2 жыл бұрын
Glad you are enjoying the Granite. A really good starter truck for sure. It is great on the Fun/$$ ratio!
@JonnieB.
2 жыл бұрын
@@RoadsideRC for sure. I packed the diff with silicone ear plugs and it is a whole different animal with a locked rear end. Loads of fun. Someday I’ll get a crawler and a 4wd buggy/truck. For now I’ll live vicariously through your channel. 👍🏻👍🏻
@51panhead91
2 жыл бұрын
I am excited to see how far you take this Everest 10. I have one and luv it. Another advantage of different axles is you could set up an overdrive.
@RoadsideRC
2 жыл бұрын
Agree! Getting overdrive would probably really help this truck!
@Webb4RC
7 ай бұрын
I just got my E10 and i love it! I got a reverse steering kit on the way also got Angle Height Damping Mount so i can decrease height. And i purchased HOBBYWING Quicrun Fusion SE 540 Spec (Fusion SE 1800KV) brushless motor &esc. I hope i picked a good motor/esc lol. Im looking to buy the Flysky FS-GT5 6CH AFHDS RC Transmitter w/ FS-BS6 Receiver. Will that transmitter allow me to control reverse steering as i need it? And i would like your suggestion on a spur and pinion gear. Im also gonna upgrade battery with 3s lipo what would you suggest on a battery. I think my stock battery connects are bananna clip, do i need to change plugs to JST? Thank you for this video i been trying to find a uograde part so i can fix the turning radius but thanks to your video rhats an easy fix!!
@RoadsideRC
7 ай бұрын
It sounds like you are going down the right path to me. The other good news is that you will have some really good components you can bring to another truck if you decide to go to a different chassis later! Gearing: run the stock gearing and then see what needs to change for your terrain and driving style. 3S lipo: I like small and lightweight - something like this: amzn.to/3Hs4iLN Plug: the Fusion SE will come with a XT60 plug on it (same as the battery I linked). I highly recommend swapping over to XT60. They are GREAT. Do you know how to solder the plugs on?
@Webb4RC
7 ай бұрын
@@RoadsideRC Zeee 3S 5200mAh Lipo Battery 11.1V 80C I just purchased that battery earlier today it has the XT60 plug. I do know how to solder but I have never soldered a plug before. Do I need to solder the plug?
@Webb4RC
7 ай бұрын
@@RoadsideRC I also purchased the flysky transmitter I told you about in my 1st post and I went ahead and got the axlel lockers for front and rear. I'm gonna have to figure out how to program the new transmitter to allow me to engage reverse steering when I need it. My next purchase is gonna be a set of sweet rims&mudders, the ones I'm wanting are $129.99 but man are they sweet.
Пікірлер: 23