Good evening you are actually a teacher in cleaning the sprays is very sweet and very very very easy way to clean the sprays but in a note now cleaning sprays need to change the filter sprays is better and not for the sprayer 👌👌👌
@Digglets
9 жыл бұрын
Thanks you for this video. Yesterday I have cleaned my fuel injector after watching your video carefully. The most hard part was to take the fuel injector out from the car. After this things were much simpler. I buy a 5cc syringe from the pharmacy and cut the far end of it. Then I took the o ring from the injector inlet and push tight the injector into the syringe. I fill the syringe with the carbon removal fluid, which I buy it from a local auto store, and put the the syringe push piston inside. I took two alligator type wire and hooks the end into injector electric point. I connect the wire to car battery, to open the injector valve, and push the syringe piston. the injector start throughing fluid from other end, hence cleaning done. I did it with rest of 3 injecotor and put it back and car start in single self :-). One thing which I regret that I should have clearned but passing the fluid from other side as I feel that it will clean the injector throughly. Two of my car injectors, out of four, were not working but after doing this few of the injector nozzles open. SO if I do it both ways may be all of them open. May be next time when car give me injector problem :-)
@niciwalsh5180
Жыл бұрын
This is exactly how I cleaned and fixed an open injector. I had 6, cleaned them all and the last one was stuck open causing issues, I managed to fix it and close it using this method. I had actually purchased one of those kits on ebay with the battery contacts and piece to put the injectors into, used a 9 volt battery and carb cleaner. The ones I have are genuine Chrysler ones for my Jeep, they are impossible to get now (I live in Australia), and the replacement ones are no good. Good as new now.
@rickjaf
9 жыл бұрын
I Like it!!, I use all the 'PRO' stuff and at times I do the bojang stuff too, It works! Great Presentation!
@gisellevalle1405
8 жыл бұрын
been looking for video for an easy alternative way to check each fuel injector when u dont have the proper tools..going to be trying this..ty
@markmodray7698
10 жыл бұрын
Great low buck solution! Thanks for the great video!
@smithkid1996
11 жыл бұрын
Nice man. I cant wait to see you first drive it. Keep up the good work!
@jonathanbolagner5253
5 жыл бұрын
Fantastic job!!! Results of monshine effects!!!
@steftacular
9 жыл бұрын
Thanks so much! I've got a rough idle I'm going to try this method this weekend!
@zwistler
7 жыл бұрын
Love it! Simple, straight forward and easy to do. Works for me!
@TheLightningStalker
10 жыл бұрын
Thanks, this looks like a really good way of doing it. When I do mine, I'll probably use an air compressor to get more pressure in there. (But not too much!) Flushing with gas is completely unnecessary. The gas will flush them out for you when you hook everything back up. You can even run an engine on gumout.
@RounakGandhi
10 жыл бұрын
simple, nice and easy... thanks
@DestroyAllorNothing
10 жыл бұрын
"most people only have two hands" hahaha
@andrewhunt7334
3 жыл бұрын
My thoughts aswell
@chevy6299
11 жыл бұрын
Neat trick, quick and effective.
@MrNazcac2
7 жыл бұрын
My kind of Work...simple , easy and effective.
@nicholassantos2327
2 жыл бұрын
Thank you sir! Imma bout to clean my injectors soon and was wondering if a 9v battery would work
@chapomartinez1323
9 жыл бұрын
Easy and beautiful lol!
@eliasagrio
10 жыл бұрын
that's correct most people have only two hands
@johnmoore9806
10 жыл бұрын
Good idea with the 9 volt, thanks. And I too only have two hands ... lol
@holliwood3226
4 жыл бұрын
So your suggestion is to force the debris into and through the injector nozzles, not push the debris out by pressurizing backwards. What if the debris is bigger than the injector passage? Won't it get stuck and wedged into the injector? Yours is one of the only videos that doesn't clean them backwards first. Just wondering why.
@stevek343
3 жыл бұрын
Right! Back flush first.
@69eddieD
10 жыл бұрын
Brilliant. I did something similar, except I actually used compressed air. You can see if the spray pattern is good and you can see it get better when cleaning a dirty injector. I use silicon spray on orings. Whatever you do, use some kind of lubricant on them so they stay seated during installation.
@berbice1961
10 жыл бұрын
very simple, thanks for sharing the info.
@khurramejaz2944
9 жыл бұрын
great job thanks
@neilufe
9 жыл бұрын
Sounds like you tasted it lol great video though. I'm on a low low budget and this will save me a bit. Thank you...
@jeffreybell75
10 жыл бұрын
Good job. A plastic bottle that is squeezable is another way to build pressure.
@MATTHEWSTONE74
7 жыл бұрын
it lacks pressure but sure the 9v battery is a good idea ! tks
@andrewhardcastle7982
2 жыл бұрын
Love it ! Nothing much wrong with that
@paulhunter123
2 жыл бұрын
Im going to do just this thanks
@dhalsim-1
Жыл бұрын
Quote of the day: "Most people only have two hands" 😊
@vondenballs
9 жыл бұрын
Cool and thanks
@apoloherrera2868
6 жыл бұрын
Thanks homy
@ShedFan1
10 жыл бұрын
Hell Yeah!!!
@moezhamdi9064
9 жыл бұрын
Nice
@zeus-io3hn
9 жыл бұрын
THX :)
@rickpontificates3406
3 жыл бұрын
“Most people only have two hands”.. I wanna meet the person who has more than two hands!
@cliftonsuber
3 жыл бұрын
I really wish youtubers would stop caring what people give you shit about in the comments. Don’t even give them the satisfaction of mentioning their issue, let them freaking worry themselves to death about why your using that product straight in the injectors. Just like the gun guys, they always mention That they’ve cleared the weapon and its checked twice and it’s totally safe. Who gives a shit, it ain’t going to shoot you through the damn video, if the guy survived to post the video, then he don’t need you to armchair quarterback his work.
@josedaniel4725
6 жыл бұрын
Gracias
@JUKE179r
6 жыл бұрын
I've seen Chemtool turn a blue fuel funnel, white due to the ingredients in it.
@bull5919
3 жыл бұрын
What would be the case if you hear the click but nothing comes out
@justbecuz2106
7 жыл бұрын
how did he took the car apart from the car
@er14de
10 жыл бұрын
saturn injectors? :3
@alexrubio9804
4 жыл бұрын
What did u use to lube up the orings
@ZombieSC
11 жыл бұрын
Are there any safer ways of doing this? I don't really consider gasoline (even small amounts) and the possibility of sparks from the 9V battery a good combination. Looks like you did it no problem though. Stay safe!
@eddierodden
3 жыл бұрын
You sounded a bit different after blowing on the injector :)
@sergioramses2615
6 жыл бұрын
I cleaned the injectors and the throttle body on my toyota tercel the same way as you but when i put everything back together it idle over 1000 rpm as before it was close to 800 rpm what could i have done wrong for it to do that ?
@stevek343
3 жыл бұрын
Vacuum line hose
@MsCherechere
10 жыл бұрын
it good
@sudarmadji9321
7 жыл бұрын
mantap
@joelcr250
8 жыл бұрын
all this for a *Saturn* ? .................. a Saturn
@sjagain
7 жыл бұрын
I drove a Saturn throughout high school (No car payment, easy to work on, good gas mileage), while saving for my Cuda. Was able to pay cash for the Cuda, and still have the Saturn for winter driving! Don't hate on Saturns!
@hectorjimenez7115
6 жыл бұрын
Yea i got a saturn,saturn redline supercharged good car
@randyanderson6110
5 жыл бұрын
If the only car you had and could only afford was a saturn and no money for a different car would you say "all that for a saturn"? Gotta do what you gotta do to keep your wheels running.
@brianpiersol9412
3 жыл бұрын
does the battery polarity matter when connecting to the injector?
@56cadd
Жыл бұрын
Nope, either way activates the injector.
@sabelonxumalo4526
3 жыл бұрын
Hi my car if you drive is backfire i change coilpak purkpak and petrol pump but steel mike semiting please guys
@exilemike
4 жыл бұрын
I would use compressed air instead of blowing in them with my mouth.
@biglove1941
9 жыл бұрын
Instead of using lube..Kilmer says to 'dip the head side o-ring in gasoline before inserting them, then they won't leak'...can anyone comment if this sounds ok? thx
@busnorth
2 жыл бұрын
Ford says use clean motor oil.
@pulsarloverCG2444
5 жыл бұрын
Can we connect battery Negative and positive charge terminals to injector randomly. Does injector will work or it blow off ?? Please do reply
@Carflip
4 жыл бұрын
Refueled And Boosted you can but just remember to connect only one terminal to the battery and tap the other one quickly
@htcooley04
8 жыл бұрын
are you the fire arm guy
@htcooley04
8 жыл бұрын
that built a Ak 47 from scrap
@htcooley04
8 жыл бұрын
+Hale Cooley the ammo channel
@rawfoodphilosophy7061
3 жыл бұрын
Hell... Yeah yeah you got so much pressure in your blowing lips. Just playing man thanks for the video I'm going to copy exactly how you did it
@tabswon3575
8 жыл бұрын
What dat mouth do
@danankblast
6 жыл бұрын
my motorcycle injector its not work with 9 volt battery 😞 it work with 12 volt battery
@NoWr2Run
5 жыл бұрын
Yes they will.
@7777Ralph
8 жыл бұрын
So you have very flammable fuel that you also make in aerosol form and then you have a battery which can cause a spark. I think you haven't thought this through very well. Usually, a carb cleaner is used or a brake cleaner but this cleaner is not flammable. But really, fuel and a battery and getting your face up there, sounds like you could end up with severe burns all over your face if you get the wrong situation or just a small spark.
@JB-qu7gp
6 жыл бұрын
Red Rum beat comment ever
@rhondaremus21
4 жыл бұрын
@@JB-qu7gp no no that is not the best comment ever it is never good to call anybody to douche either be positive or don't take to making comments cuz you got nothing else to do.
@ronmiller7916
3 жыл бұрын
Seriously? Then use a longer tube. All you idiots with no ability to think for yourselves. It's a good idea and if you're afraid, change that you think is dangerous. Sounds like you're using YT instead of reasoning skills.
@stephenagaertner
9 жыл бұрын
You may have forgot to say a few things in your video... 1. need to tell some of the FREAKING IDIOTS out there not to SUCK on the fuel injectors! 2. Then lastly you are not responsible for them blowing up their cars/houses. LOL
@99quintinsnapshot
9 жыл бұрын
stephen gaertner To late I lost my garage and car to a fire cause by a 9 volt battery and fuel ... my wife called me an dumb-ass for over 2 weeks!
@pierrejeanes
Жыл бұрын
A bullet? Please don't shoot them !!!
@curtiswilliams6754
9 жыл бұрын
dont set yourself on fire. jkjk
@EASTENDGLEN
9 жыл бұрын
you are lucky you did not light your hands and/or face on fire
@stephenr1999
7 жыл бұрын
lol i have actually done that. i had nitrile gloves on and i guess the fumes had gotten in there.
@gelfandothea
7 жыл бұрын
I'm sorry, but anyone who thinks gas and 9volt batteries are an accident waiting to happen is seriously suffering in the IQ department.
@Peppermint1
6 жыл бұрын
B-12 chemtol is way too harsh and will damage the inside if you don't install the injectors on the engine right after the cleaning.
@phyrexiannewborn7104
5 жыл бұрын
What would you recommend instead?
@donaldfrederick1557
10 ай бұрын
Black screen. Don’t show much
@julieoliver8170
2 жыл бұрын
My god you guys are slow . It's common sense get to the point/
Пікірлер: 94