Thank you for watching my review! Please help me reach my goal of 1000 subscribers 🎉🎉🎉 thank you again for watching! Thanks to you all I recently reached my goal of 500 subscribers in January 2024!
@ianforrest
3 жыл бұрын
Wow, thank you so much! I struggled to get this pesky little thing to light for ages. I was beginning to think it was faulty then I watched your review and about the air hole needing to be open. I don't know if I'd have ever succeeded without your video. Once again, many thanks!
@jacksonworkshop
3 жыл бұрын
Thanks for watching! I struggled a long time with that too. Was about to return it lol.
@richardjohn5216
Жыл бұрын
video was exellent,i bought one ,and could not get it to work,filled up with gas ,and that was it ,for few hours,watch your video,and boom,got it going ,thanks for upload video,i use it for rc cars,solder big cables,heat shrink after,works well,tried electric solder irons,but big cables,suck the heat out of the iron,cold,i too,tried plumb torch,was hot ,but big head head,melt wire,hard control flame,but this is good for big cables,rc wiring
@jacksonworkshop
Жыл бұрын
Sorry for such a late response! I just became very active on KZitem again, and definitely plan to stay. Being how small it is, it certainly has limitations. None the less a great torch. Thanks so much for watching!
@lovely31bluprint
3 жыл бұрын
Thank you for making my day. I was looking for this review.
@jacksonworkshop
3 жыл бұрын
I’m glad you liked it! Thanks for watching!
@jamesmckenna2970
4 жыл бұрын
Great review definitely a deal breaker for Me! I’m surprised you aren’t sponsored!!
@jacksonworkshop
4 жыл бұрын
Lmao McKenna
@rooxhind8649
Жыл бұрын
Thank you so much, instructions were not clear but your video was :) Brill.
@jacksonworkshop
Жыл бұрын
Thanks. I think lol.
@jude1515
2 жыл бұрын
Good tutorial. I ordered one of these.
@jacksonworkshop
Жыл бұрын
Sorry for such a late response! I’ve recently became very active on KZitem again. Thanks for watching and hope it worked great for you!
@jude1515
Жыл бұрын
@@jacksonworkshop Thanks and it works great.
@MATIKAINEN100
Ай бұрын
thanks i bue today this......
@jacksonworkshop
Ай бұрын
@@MATIKAINEN100 thanks so much for commenting and watching! I appreciate you!
@MichaelBegelspacher
2 жыл бұрын
Thanks for this video.
@jacksonworkshop
2 жыл бұрын
Thanks for watching! P
@nag-son695
7 ай бұрын
How do I get the torch to reach maximum heat ca 1200 D Celcius? It won´t even melt silver at ca 900 Ceclcius, even when using the extender.
@jacksonworkshop
7 ай бұрын
You gotta open the vent so the hole is completely see through! Thanks for watching/commenting
@lilly4455
4 жыл бұрын
Thank you for the explanation 😀
@jacksonworkshop
4 жыл бұрын
Thank you so much for watching!
@maxheadrom3088
3 жыл бұрын
Soldering home electric wires is a pain - I'll get one of these.
@jacksonworkshop
Жыл бұрын
Yes they definitely are! I’m sure this could get the job done!
@이웃집고양이루루
Жыл бұрын
Would this be strong enough to melt silver? I need a propane torch for making silver coin rings.
@jacksonworkshop
10 ай бұрын
I wish I could give you a accurate response, but I’m unsure
@davidecostantino3166
8 ай бұрын
thank you very much!! What is that little yellow box?
@jacksonworkshop
8 ай бұрын
This has bothered me for a while….apparently it’s a sponge? What it’s for, is beyond me.thanks so much for watching! Please subscribe! Merry Christmas!
@vladimirpetrovic5572
2 ай бұрын
It's for cleaning soldering tip. You wet the yellow sponge and clean tip by passing with tip on the surface of wet sponge.
@hernanvassallo9902
3 ай бұрын
Hi, can I melt 1 or 3 gr of gold with this torch? Thanks
@jacksonworkshop
3 ай бұрын
Unfortunately I have never attempted using it with gold
@hernanvassallo9902
3 ай бұрын
@@jacksonworkshop ok, if this kind of torch can reach 1100/1200 celcius degrees i think it could melt it.
@JanineMKartist
11 ай бұрын
long tube could be good for getting bubbles outvote resin
@jacksonworkshop
10 ай бұрын
I’m sure it could! Thanks for commenting and watching
@silviaborgers4105
10 ай бұрын
Thanks Man! I was puzzeled bui the user manual. It is not clear att alll!!!! Could not turn it on!! whahahaha
@jacksonworkshop
10 ай бұрын
Turning it on was a struggle for me at first too. Lol. Thanks for watching
@xbronn
2 жыл бұрын
thanks man
@jacksonworkshop
Жыл бұрын
Thanks so much for watching
@joannachekowska3216
3 жыл бұрын
I've just bought dremel torch and bought online propane-butane Ronson's cans 300ml. Can I use it with dremel or I wasted money for 5 cans of propane-butane? Can't find informations about using propane-butane with dremel torch anywhere...
@jacksonworkshop
3 жыл бұрын
Any off brand cans of butane work! I use off brand all the time. Thank you for watching!
@joannachekowska3216
3 жыл бұрын
@@jacksonworkshop so, if i uderstand correctly (english is not my language): there is no difference between butane or propan-butane mix, right?
@jacksonworkshop
3 жыл бұрын
@@joannachekowska3216 forgive me I just saw the propane part....to be honest I’m unsure. I just checked the ones I use and it only says butane
@joannachekowska3216
3 жыл бұрын
@@jacksonworkshop The case here is that every substance has CAS number which tells you what is that substance. When i checked CAS nr "68476-85-7" this one which I bought: www.stephensons.com/ronson-butane-gas-lighter-refill.html it showed me that it's not pure butane only mix of propane and butane. Now I only guess, that in english commonly it is called 'butane torch' and ' butane gas' but in fact it's mix of this two: propane and butane. So translation from english to my language is not good enough. Thank you for help! Hugs :)
@joannachekowska3216
3 жыл бұрын
@@jacksonworkshop btw you can check CAS number on your "butane can"...
@tomfaro6259
2 жыл бұрын
Thats one of those mini torch like lowes sells. Drop it and porcelain in nose falls out. They suck
@jacksonworkshop
Жыл бұрын
I did not know that, luckily it hasn’t happened for me! Thanks for watching
@peteruveges1976
Жыл бұрын
Is it still working good?
@jacksonworkshop
Жыл бұрын
Still works great
@leepu747
3 жыл бұрын
Very informative How I can buy in India?
@jacksonworkshop
3 жыл бұрын
Not entirely sure I got mine off Amazon
@lennartjuhh
Ай бұрын
It's funny you'd ask an American. Lol
@leepu747
3 жыл бұрын
I need for brass and silver brazing
@jacksonworkshop
Жыл бұрын
Amazon sells them or most big stores!
@dyvel
3 жыл бұрын
so when it's empty you don't have to go and buy a whole new can of propane, you just have to go and buy a whole new can of butane?
@jacksonworkshop
3 жыл бұрын
Yep! All you need is butane cans for refills
@raysmith2940
Жыл бұрын
lol. good point. either way you need to buy more!
@TheOneAndOnlyRalph
7 ай бұрын
$55.00 Now 2024
@jacksonworkshop
7 ай бұрын
Does it really cost this now? Thanks for watching and commenting! Jeff
@emilywoo7832
2 жыл бұрын
Can you cut metal with it?
@jacksonworkshop
Жыл бұрын
If it does I wouldn’t know how!
@NarowAR07
9 ай бұрын
Depends on the metal i guess.... Probably not tho as it doesnt use an oxygene cutting flame...just simple butane which reaches about 1200 celsius. Perhaps enough to melt some metals but i doubt you can effectively cut anything with it.
@kellyv7484
Жыл бұрын
I have a dremel versa used it many times, , but now it won't ignite...it's full of butane to, any ideas on how to fix this?
@jacksonworkshop
Жыл бұрын
Unfortunately I haven’t really messed with the versa. I wish I could help 🥺
@nevermind824
6 ай бұрын
Clean the nozzle as it needs good electrical contact to light
@gaffle-411
2 жыл бұрын
6:23 - 6:33 ... so are you saying that if you WERE SPONSORED by Dremel, you'd give a dishonest and biased review?
@jacksonworkshop
Жыл бұрын
No I would give a honest review regardless. But some people like hearing there is no motive behind a review. I’ll always give honesty. Thanks so much for watching!
@donschoonover1068
3 жыл бұрын
It would be a better review if you had used and demonstrated all the tips, not everyone will want to use it just to burn things. Please read the instructions at least once so you can at least install the tips properly. No, I probably won't buy one, I like the better model that is pen shaped.
@jacksonworkshop
3 жыл бұрын
Maybe check out another video of people using it on different things lol none the less thanks for watching I think....
@karajackson2868
3 жыл бұрын
wow what a great review, whoever doesn’t think it’s a review probably shouldn’t look up the title of this video.
@BigChutes
3 жыл бұрын
This is an awful review. Basically nothing more than an unboxing with only a single demonstration of function (and a very unchallenging function. It can torch wood... yay). There's so much more that could have tested. But whatever.
@donschoonover1068
3 жыл бұрын
Sorry, but it's not in depth at all.
@jacksonworkshop
3 жыл бұрын
Thanks lol
@alexandrughetaru
3 жыл бұрын
Not a review as you did not state any opinions about the product.
Пікірлер: 79