Thanks to INAV developers!!! Thanks to your channel as well
@FPVUniversity
10 ай бұрын
Our pleasure!
@asaadsaid5549
10 ай бұрын
I will consider switching from Betaflight to INAV7 😍. Thank you for your exceptional videos and guides!
@FPVUniversity
10 ай бұрын
Have fun!
@lesjack137
11 ай бұрын
Good work guys. Have a VTOL Albabird build underway.
@typxxilps
10 ай бұрын
I miss the release during a live stream, but you got already 182 thumbs so time for me to add 1 now. Great work.
@FPVUniversity
10 ай бұрын
I appreciate that!
@Rc.Clr4Tkf
10 ай бұрын
Hello and thank you for your valuable time and commitment, not to leave out all the other hard working contributors. "Bravo..." Inav is just "Awesome!!!" Was Excited to flash the new Inav 7 on a re-work of a Darwin 129 with a SB F7V2 Fc (made a custom target to remap CC pin for servo use to do the Camera tilt thing), new M10 GPS, Mateksys optical flow/lidar. "All is working beautifully", will try Cruze Mode this weekend. Yippee... 😁 Hope you and everyone has a great upcoming holiday! Thank you... Ps, love the hat, have to see how to get one here to Mexico (shipping can be "well challenging at times, they will really like or lose your Stuff, only sometimes though"
@TakeItToTheGround
10 ай бұрын
Darn my matek F411 wings were my go to FC's in small planes. They just won't die no matter how much I abused them.
@goku445
9 ай бұрын
They are great flight controllers.
@WinstonSmith1984
10 ай бұрын
Thanks for all the great work! After the 8.* release in the future, can/will bug fixes (or really minor improvements) in the 8.* branch be merged down into the 7.* branch too (if compatible) so that F411 users can still get the best of INAV? Or do the releases for every major version simply come to a dead end once the next major version is released? I'm sure a lot of analog fixed-wing pilots have F411 boards still in use because they're fine with old VTXs that don't need a serial connection.
@goku445
9 ай бұрын
Yes, F411 were very popular. New flight controllers of the same size like the F405 are quite more expensive now.
@pettz18
10 ай бұрын
Thanks Pavel and to the whole team👍🏼👍🏼✈️✈️🫡
@FPVUniversity
10 ай бұрын
Thanks
@nickplatzer65
10 ай бұрын
Hi Pawel, I just switched to 7, but I have a question, is there any indication when the Speedybee app starts supporting the INAV 7 via WiFi/Bluetooth? Because I build a Siccario, but PIDs are not great yet and every time I want to access the USB port disassemble the frame. Or is there any other way I can connect wireless to my Tmotor F7 pro? I am not able to find any USB-C extension cable which works with my FC, please help, thanks
@Sam-gr8pl
10 ай бұрын
In RTH we Trust👍💪
@FPVUniversity
10 ай бұрын
yes we do!
@ApappieK
10 ай бұрын
Proven reliability for planes AND long range quads (quads autoland on the helipad and auto-disarm 🙂 ).
@goku445
9 ай бұрын
Saved my ship more than once.
@BossGarage
10 ай бұрын
VTOL support, yeaaah! 🔥🔥 I suggest you to make a video tutorial on the topic!
@Sonic_Ox
10 ай бұрын
Thank you for all of your hard work Pawel. I recently built my first 7" quad and have configured it with INAV 6 (I have never used BetaFlight or earlier versions of INAV). Is migrating everything from INAV 6 to INAV 7 pretty painless? Is there anything I should be aware of? Should I just erase before flash and start from zero? I plan on migrating very soon as I am VERY interested in the cruise mode and the simplified tuning. I am only hesitant because INAV 6 is working so well that I don't want to risk messing up my configuration 😂.
@wattage2007
10 ай бұрын
These major releases have been coming thick and fast!
@FPVUniversity
10 ай бұрын
Major comes every 9 months or so. It's not our fault Betaflight slowed development so much and they have no major features to release anymore
@metaldetectingnmore8763
8 ай бұрын
@@FPVUniversityhi ps what do u think of open tx have they added touch screen support yet or not. Coming back to the hobby after 2 years
@metaldetectingnmore8763
8 ай бұрын
@@FPVUniversityor should i move to edge tx and what is the diffrence is edge tx ok to use.
@santiagoherreraquintero3166
Ай бұрын
Thanks for the great video. I have a 10-inch hexacopter that sometimes doesn't stabilize. What can I do?
@TheCatFather01
10 ай бұрын
Quick question: is osd now fully supported with inav for dji o3? Or is it the same bf compatibility mode? Thank you!
@NorthShoreProductions
7 ай бұрын
I am wondering this too!
@TheCatFather01
7 ай бұрын
@@NorthShoreProductions found out, it is not, same as inav 6, but good enough for what i common use 🙆♂️
@maximusaugustus4976
6 ай бұрын
Nice release. Still have few questions: 1. does it have geofence and geo-awarness capabilities ? 2. does it the possibilty to have a speed limitation ?
@FPVUniversity
6 ай бұрын
take a look here kzitem.info/news/bejne/0q6hznh5haufiGk
@DavidBeaver-n4g
7 ай бұрын
This is no joke folks. I just upgraded Speedybee F405 V4 to inav7, and successfully configured the timer/motor/servo mixing for a bicopter in Chinook configuration. Had it running smooth full duration flights within an hour of firmware update using previous settings from inav6. Fine tuning done with the phone app. ......and I never had to go into CLI !!
@FPVUniversity
7 ай бұрын
It's pretty sweet indeed!
@stonesrcchannel
10 ай бұрын
Sweet thankyou upgrading my fleet today 🎉
@FPVUniversity
10 ай бұрын
Enjoy it
@vevere812
10 ай бұрын
Great release and great video. but I saw few bugs .... perhaps only on my board (Speedybee F405 wing). "save and reboot" button does nothing in the 4 PID pages in 7.0.0 Configurator and flight mode changes (accro manual horizon) are often very long to change on the flight controller when I move the corresponding switch on the transmitter ... and sometimes the mode doesn't change at all (it stays on the last mode selected in the LUA script and also on the telemetry page [TX16S] but I can see the "FM" telemetry information updated many times each second)
@vevere812
10 ай бұрын
Oops, I must correct my previous comment, the ""save and reboot" button does nothing in the 4 PID pages" still remains, but for the second bug that was my fault, I tried to activate "Permanently enable Launch Mode for Fixed Wing" to see how it works ... so it was in "launch mode" and it stays in "angle mode" waiting for the launch ... so sorry. have a good day
@wgoglach
5 ай бұрын
Hi Pawel. Any chance for inav will work with mamba f435 ai stack?
@Sleeperknot
8 ай бұрын
Can INAV7 be configured to control the VTX power from the radiomaster TX12 MKII ELRS transmitter?
@Walt-c9m
8 ай бұрын
One thing I experienced is on the output tab it took several times to get all motors to spin. Three would spin then i would reboot and 2 would spin then i would reboot and 3 would spin.And finally all 4 spun.
@TheCatFather01
10 ай бұрын
Amazing work, thank you! 🙏🏼
@FPVUniversity
10 ай бұрын
Thank you too!
@gregdavidd
10 ай бұрын
Thanks so much for all the hard work on this project. I am currently a BF Quad user. I want to switch to iNav. Do you plan on producing a new series of iNav 7 Tutorials? In the mean time, which of your playlists would you recommend? There is a newer FPV quad playlist or there is a much older iNav playlist?
@FPVUniversity
10 ай бұрын
The INAV 5 and 6 series are still valid. I mean proces should be very similar. But yes, I think I will have to record a new series early next year
@gregdavidd
10 ай бұрын
@@FPVUniversity Thanks so much. I looked through your playlists and the only one I could find that looks like a complete Quad inav setup playlist was for iNav3. Do you mind giving me a link to the iNav 6 playlist you mentioned?
@cinedronesfpv4843
9 ай бұрын
Hi Pawel. I have a 6 inch FPV multirotor drone. Which preset profile should I select after I have flashed INAV 7? Currently I only see the preset profiles for Multirotor 3, 5, and 7. Hope to hear from you. Thank you.
@FPVUniversity
9 ай бұрын
Try5" and try 7". See which one performs better :)
@cinedronesfpv4843
9 ай бұрын
@@FPVUniversity thank you Pawel. I will give it a try. 😊
@achaverr
Ай бұрын
Hi, please help me, I am currently using Inav 7.1, I have a Air speed sensor, when I turn on the plane and the FPV, the sensor starts at 5K/h, I wonder if the air speed sensor can be calibrated in INAV? Thanks
@Elecifun
10 ай бұрын
YAY! get the higher refresh rates and more constellations 'back' for the satellite receivers. My M8N Neo will be so happy.
@FPVUniversity
10 ай бұрын
Enjoy!
@DiaboloIIICzarodziej
10 ай бұрын
Witam, Dopiero zaczynam przygodę, i nie mam pojęcia o czym mowa ...mam speedybee v4 i kończę mój pierwszy dron na o3 . Przeskok z ukochanego DJI FPV....także od czego zacząć beta fly czy może INAV 7? Czego się uczyć? To polski projekt czy twoja praca? Pozdrawiam `
@FPVUniversity
10 ай бұрын
Jak z DJI FPV to zdecydowanie INAV. A INAV to project międzynarodowy, ja tym tylko zarządzam
@DiaboloIIICzarodziej
10 ай бұрын
@@FPVUniversity szacun, klasa i poświęcenie...będę uczył się na INAV...thx
@robertoostili2720
10 ай бұрын
Good evening, I have a problem with Mateksys H743 V3 with the GPS not keeping position and difficult to arm the drone
@catmanfpv9213
5 ай бұрын
Sir, you are my go to everything about inav, can I have a request? To add target to inav for Flight controller Aikon F7 AIO.
@andreasmuller5028
9 ай бұрын
Hallo ich möchte einen Copter bauen und habe noch einen Mateksts F722-hd meine frage wäre ob ich denn mit inav verwenden kann. Eine DJI O3 möchte ich auch noch verbauen .
@irmantasvaluckis1731
10 ай бұрын
hello, is it possible that after the automatic takeoff the plane turned its wheels instead of flying further, inav programmers should do this
@maciejmotylinsky
8 ай бұрын
I see first problem in VTOL. It can be tricopter + plane. Looks like not support quad + plane. Am I correct ?
@FPVUniversity
8 ай бұрын
It supports everything as long as you have enought outputs to setup both mixers and connect everything
@ImperialArmour
10 ай бұрын
Where can I get the INAV cap? Switched over from BF 4.4.2 and I preferred Inav!
@FPVUniversity
10 ай бұрын
Link in description :) bit.ly/3GezzBq
@Dashone93
10 ай бұрын
What is ez_filter_hz. Can’t arm
@didichung4377
10 ай бұрын
hello, I have mamba f405 mk4 2022b, and my vtx (dji o3) is always turn off when I flashed the FC to inav 6.1.1 or 7 RC3, but it came back on when I flashed the FC back to betaflight... I'm sure that I'm using the right firmware and I've flashed 6 times back and forth between inav and BF, and the problem remains the same... can you help me?
@dronauticaltech-fun3485
10 ай бұрын
Amazing, just amazing 🔥🔥🔥🔥
@FPVUniversity
10 ай бұрын
thanks
@MCsCreations
10 ай бұрын
Awesome! Thanks for the news, Pawel! 😃 Stay safe there with your family! 🖖😊 And happy holidays!
@FPVUniversity
10 ай бұрын
Same to you!
@pilotmiami1
10 ай бұрын
Bravo.thenks.Go ahead
@IggyBiggy
10 ай бұрын
Never really dipped my feet into INav, but I think this update will make it try it out. Is a compass still required for the good GPS function for drones?
@BBFPV
10 ай бұрын
You will need a compass for RTH and all autonomes flight modes but not for acro and angle.
@IggyBiggy
10 ай бұрын
@@BBFPV sweet I already flashed it and my GPS had a compass 😂. I managed a hover then I had to leave for work.
@BBFPV
10 ай бұрын
@@IggyBiggy👌
@PredySoft
7 ай бұрын
Hi Pawol, thanks a lot for all this job I decided to try this instead of Betaflight. Recently I flashed INAV 7 Firmware to my Skystars F722 HD Pro4 FC. In INAV the target is SKYSTARSF722HD. I selected lates stable version and flashed firmware. But INAV doesn't detect anything except barometer so at the end it is not working at all. Is there some trick how to fix the problem? Thanks a lot.
@FPVUniversity
7 ай бұрын
Probably manufacturer put a different gyro. Make a issue on INAV GitHub and write down which gyro Betaflight detects
@cyborgfpv7361
10 ай бұрын
That's a great achievement mister Pawel 👏 Thank you Do you think it's safe enough to make a Quad Auto launch mode? when you throw the drone it will fully arm and stabilize In air, with GPS and Mag... It's too crazy to ask for it?
@FPVUniversity
10 ай бұрын
Well, if you convince any developer it's worth to do it ;)
@rline88
10 ай бұрын
I use 7 RC3 with a VTOL. Can i copy my DIFF into the final 7.0 and it's all good? Of course everything will be checked again before the flight. Great work on iNav 7 😊
@FPVUniversity
10 ай бұрын
yes, INAV 7 RC will be compatible with stable release
@staydown.normal5323
8 ай бұрын
inav dose not work with adrino pilot misson planner any more that sucks the drone dose not show up on the maps any more
@flipfpv4539
10 ай бұрын
New to inav 7 bit confused about switching motor mapping using wizard Am I supposed to allocate the motor that is spinning to the position it should be Thanks for your help
@FPVUniversity
10 ай бұрын
yes, exacly. And mixer will make all required adjustments
@piotrkojder7177
6 ай бұрын
Kolego właśnie próbuję odpalić Dolphin FPV ze SpeedyBee 405 Wing na pokładzie i natknąłem się na dwa problemy. INAV 7 nie reaguje na drążki kotrolera. Używam Radiomaster pocket i odbiornik ERLS Radiomaster RP1. Radio binduje się z odbiornikiem. używam najnowszej wersji ERLS 3.2.0. W INAV w zakąłdce recivier wszystko ustawione jak należy (Serial, CRSF). Drógi problem to serva (ja się je mapuje )
@samsonfpv8902
5 ай бұрын
Trying to upgrade from iNav 5.0 to 7.1… 5.1 and 7.1 configurators connect without issues. However when I try to flash, it just shows “ connected to: Com4 “ and does nothing… what am I missing?
@samsonfpv8902
5 ай бұрын
Matekf405SE
@JvM0delismo
10 ай бұрын
Hello from Brazil 😊
@FPVUniversity
10 ай бұрын
Hello 👋
@NiCadHeliPilot
10 ай бұрын
Crikey, iNav is looking more attractive to me than Betaflight, because of this. Now, all I need to do is make the switch.
@FPVUniversity
10 ай бұрын
yes, you should
@NiCadHeliPilot
10 ай бұрын
@@FPVUniversity Already done so. Now, I am up to upgrading the GPS module in my quad to one with a built-in compass. This is where the fun begins! 😈
@richiemillet697
9 ай бұрын
Why doesn' t work my M80 GPS at INAV 7.0
@mohamadsharizan1981
5 ай бұрын
Hi sir, can you add firmware target for iflight blitz_f7_aio ?
@andreasmuller5028
9 ай бұрын
DJI O3 this is possible. I would not be happy to receive an answer.
@AB-sk4kz
10 ай бұрын
Congrats 🎉
@FPVUniversity
10 ай бұрын
thanks
@ImperialArmour
10 ай бұрын
How does Inav7 compare vs Betaflight 4.4.5?
@FPVUniversity
10 ай бұрын
But in which aspect? I have a dedicated video on this topic kzitem.info/news/bejne/1GOu3p2fiWmgnKA
@pelurusilver
6 ай бұрын
Sir, can inav 7 use standalone compass such as GY-273
@FPVUniversity
6 ай бұрын
yes
@vovsen123
6 ай бұрын
Where is the EZ Tune in inav 7.1?
@MrMartinRome
10 ай бұрын
Hi Pawel, can I use the config file from INAV 7 RC?
@FPVUniversity
10 ай бұрын
Yes, you can
@Syl20mm
10 ай бұрын
Can the GPS component manage simultaneously several constelation?
@FPVUniversity
10 ай бұрын
yes. It was always like that
@ApappieK
10 ай бұрын
You cannot use Glonass AND Beidou at the same time because they use the same band. So it's GPS and Galileo and Glonass OR Beidou.
@N8904V
10 ай бұрын
Wonderful
@HANKthebastrd
10 ай бұрын
thanks Pawel!!!!
@yatzeegamingop
10 ай бұрын
Does every fc support vtol ? Can i use a separate PDB and a non-vtol fc ?
@FPVUniversity
10 ай бұрын
FC has to have enough outputs to connect all required servos and motors
@yatzeegamingop
10 ай бұрын
@@FPVUniversity Fantastic, I can't wait to build a vtol plane 🤩🤩. Never been this hyped up about fpv for years!
@AndreyZzz
8 ай бұрын
👍👍👌
@aviphysics
10 ай бұрын
EZTune is missing a switch to enable RPM filtering.
@FPVUniversity
10 ай бұрын
INAV flies greeat without rpm filters. So whatnfor?
@witblitsfpv1265
10 ай бұрын
F411 😢 Price of progress...
@akshayharidas1235
10 ай бұрын
Speedybee f405 V3 ? How's it performing.... Any one tested ?
@FPVUniversity
10 ай бұрын
It's all fine. Issues fixed
@akshayharidas1235
10 ай бұрын
@@FPVUniversity thank you sir @FPVUniversity
@Sleeperknot
9 ай бұрын
DSHOT support and F405 v3 support - that is all I want to hear. Going from Betaflight to INAV, because, IN RTH WE TRUST! I want cruise, loiter, alt-hold modes badly. Being able to fly only freestyle with the "fall from sky if the radio is lost" feature is honestly boring.
Пікірлер: 124