Hi Joe. What an excellent review. Everything completely clearly explained and at a great pace. Well done. I came to this (initial) review from the '4yrs later' follow up. That was also excellent. I like the cut of your jib, so I have subscribed. Regards Mark in the UK
@MikeWaldt
9 жыл бұрын
An excellent no nonsense review Joe. Cheers Mike
@1973jdmc
4 жыл бұрын
Thank you for your time in going through the details of this machine. Really appreciate it - MANY THANKS
@AverageJoesJoinery
4 жыл бұрын
Glad it was of help 😊
@Luckyse7en1980
4 жыл бұрын
Honest and frank review. I came to this after seeing the 4 year update review. Proves you were correct in your judgement in this one. I have a number of screwfix Titan products and they haven't let me down yet. Nice to see reviews from ordinary working people rather than a sales rep. Going to get one - soon as they come back in stock. Thanks
@AverageJoesJoinery
4 жыл бұрын
Thanks mate! Really glad you found the reviews useful. I always watch reviews before I buy anything haha cant beat seeing what actually users think of the products
@flypic1098
2 жыл бұрын
Me too. I saw the 4 year one first. I had already bought mine though (Nearly £200.00 though in 2022) Screwfix offer price!
@Ian_Smith16
4 жыл бұрын
Had one of these given to me few months back, brand new and never used. Couple thing to look out for when setting it up. 1. check the out feed on jointer with a straight edge against in feed with a spirit level. I found the out feed table was 1/4 inch lower at the end, resulting in a 3 foot 1 inch board have a curve in the centre. With no adjustment on the out feed bed I made a 1/4 inch wedge the width and length of the out feed tablet to compensate. Now its all square and flat. 2. The in and out feeds of the planer are too short resulting in a small step at the end of the board, again on a 3 foot by 1 length. Made two extensions two feel long one for each side drilled and bolted on. Works fine now. Joe mentioned the in feed table on the jointer had some play in it. The yellow locking nut has a washer fitted with a recess on one side and you assume the recess goes on the yellow side on the locking mechanism, in fact it faces the machine side locking the in feed steady. All in all not a bad machine, just mass produced and lacking in quality. But with a little time and effort you can get exultant results from it for the home DIY person
@davidhartley3628
3 жыл бұрын
a
@johnswimcat
4 жыл бұрын
Thanks very much for this video. A friend and I couldn't work out how to fit the dust extraction unit and it was only by watching this video that we found out. Many thanks
@AverageJoesJoinery
4 жыл бұрын
Thanks John! Glad you found it helpful 😊
@phillipneale6422
3 жыл бұрын
Thanks Joe very honest and informative, like your gentle style, much more relaxing than some of our friends across the pond !
@AverageJoesJoinery
3 жыл бұрын
Thanks Phillip! Glad it was of help mate 😊
@32MindenMen
2 жыл бұрын
A bloody good and honest review, thanks Joe. Great delivery, easy to follow, and using easy basic easy to understand language. Well done. I’ve ordered mine on the basis of your review.
@AverageJoesJoinery
2 жыл бұрын
Thanks mate! Really glad you found it helpful 🙏
@DiHandley
8 жыл бұрын
Excellent review. At this rate I'll be up all night looking at your great videos. Cheers 😀
@scottpriest5126
4 жыл бұрын
I had a couple of planer thicknesser machine in mind to purchase and I couldn’t make my mind up. After watching your reviews you made me buy the Titan one. Your video made it easier for me to set up and use. Brilliant bit of kit. Brilliant video thank you
@AverageJoesJoinery
4 жыл бұрын
Thanks Scott! Really glad you found the review helpful 😊
@lotfitalbi3950
4 жыл бұрын
Thank you Joe, a very helpful video. Cheers mate
@AverageJoesJoinery
4 жыл бұрын
Cheers mate! Glad you found it helpful 😊
@northernrob8072
Жыл бұрын
Well I've just bought this and put it together. Not familiar with such tools so most appreciate your review Joe. Also good to see your still happy four years on. Thanks for your no nonsense review, I feel much more comfortable using it now.
@alangardiner872
2 жыл бұрын
Well.. I have to say, that was one of the best and most simple yet comprehensive detailed and informative reviews I have seen. You did exactly what you had said on the Tin!...Well done, and no Fukin stupidly annoying Music. .Ten out of Ten... hope you get thousands of subscribers. I have subscribed and thumb's upped you, to help! Well done Mate.
@AverageJoesJoinery
2 жыл бұрын
Thats very kind of you to say, Alan! Thank you :)
@shooterfilmcompany6227
Жыл бұрын
Thanx for your well presented review and thoughts on this machine. I have just bought one and your, and others, videos helped me tweak and set it up begore I even processed a single foot of timber through it. I think I have got it pretty well set up...level plates, lubed gears, bushes, chains and shafts. Removed annoying red cover button. Bypassed safety switch so no need for the extractor shuffle. Squared up fence. Checked blade leveling to feed plate. I also sorted the feeder tools by attaching 80 grit sand paper to them... to eliminate slipping. I have also made a roller device to hold down the out put timber side on the planer surface.
@mjwalne
2 жыл бұрын
Honest and thorough review. Thank you… I’m off to buy one 😁
@AverageJoesJoinery
2 жыл бұрын
Glad it was of help! 🙏
@janetbayford133
4 жыл бұрын
Thanks so much for this review. I am new to woodworking and don’t want to spend a fortune so this is really helpful.
@AverageJoesJoinery
4 жыл бұрын
Thanks Janet! Really glad you found it helpful 😊
@melodoubt
17 күн бұрын
The Draper model 09543 BTB200 is 99.8 % identical to this machine yet retails at a higher price. Good review Joe.
@alunh900
6 ай бұрын
Excellent video, very instructive and well presented. It was a huge help in getting us up and running at the workshop using this great piece of kit.
@davidrichards7722
7 жыл бұрын
Thank You Joe , an excellent no nonsense review. I have been looking to buy a planer,and if every one done reviews like this it would make life much easier,when your choosing one on a limited budget. Thanks again
@AverageJoesJoinery
7 жыл бұрын
+David Richards Thank you David! Im really glad you found my review helpful. I personally always watch reviews before I buy anything 😊
@thedieiscast9729
2 жыл бұрын
Good review Joe, thank you.
@gorguk
7 жыл бұрын
Regarding the switch - to open it you don't need to push that yellow piece down, just slide that red round button up. It should work as it does on my Woodstar PT85.
@AverageJoesJoinery
7 жыл бұрын
Thanks mate! I feel really stupid about that lol It is really simple.... when you know how haha :)
@gorguk
7 жыл бұрын
I broke few nails before I found the proper way :)
@patpathinayake3586
3 жыл бұрын
Thank you very much for the comprehensive review, Joe. One of the very best so far I have seen on KZitem. Straightforward review without any bells and whistles. Excellent technical content. Thumbs up and subscribed. Best of luck Joe.
@markkavanagh4457
16 күн бұрын
Bought one today for £60.00 second hand, the seller clearly didn't use it, as it hasn't got any marks or scratches on it, it looks brand new, total bargain!! Struggled to set it up though, as the instruction manual was more than useless. This video was a great help. 👍👍
@edwardmorton6691
5 жыл бұрын
Very helpful. Was thinking of getting one and you have made up my mind. Thanks mate.
@AverageJoesJoinery
5 жыл бұрын
Thanks Edward! Glad you found it helpful 😊
@andytwonames
5 жыл бұрын
Hi Joe, I finally got this machine. Ordered it on the Sunday of the 2018 screwfix show (just before I found you and had a chat) and it was in my local branch on the Mondy night ready for collection. Wasn't able to play with it until yesterday and it's great. I used it to process a whole load of pallet wood. Early on, something nicked the blades so everything comes out with a tiny ridge. New blade or maybe take a file to the nick.... I got a metal detector, push blocks and an adapter and hoze set from rutlands and combined them with a cheapo cyclone and a 30litre food barrel from ebay to use with an old dyson that has been knocking around in the shed for years. Works perfectly. Keep up the good work.
@AverageJoesJoinery
5 жыл бұрын
Thanks Andy! Glad it got to you so quickly, screwfix has a great service like that! Shame about hitting a nail but the metal detector will definitely help with that in future. Re sharpening the blades will remove the the dent if its not too deep. If its a deep gauge then it might be better to get some new blades. Ive never sharpened mine since Ive had it so I dont know how easy the process is haha sounds like youve got a great setup now! I have a cyclone but I run everything off 1 extension lead in my shed so I dont run the planer and the vac at the same time haha its a waste really lol
@steverobbins9419
2 жыл бұрын
Thanks Joe. I have just bought one today. 👍
@manfredneder8065
7 ай бұрын
Best review of this planer I have seen on KZitem. Well done.
@royster3345
5 ай бұрын
Well I'm here because I was looking at planners, and this wasn't on my shopping list but is now 👍
@derekwallace3351
7 жыл бұрын
just ordered mine. thanks for demonstration, found out all i needed to know prior to to ordering which is just what i was looking for. great video
@AverageJoesJoinery
7 жыл бұрын
Thank you Derek! Im glad you found it helpful :)
@richardpowell3627
2 жыл бұрын
Great review. Buying one
@mobyme
5 жыл бұрын
Excellent review, no stupid music in the background and covering all the points that a prospective buyer wants to know.
@AverageJoesJoinery
5 жыл бұрын
Thanks Chris! Really glad you found it useful 😊
@ryanclark3445
5 жыл бұрын
An excellent detailed in depth and clear review
@AverageJoesJoinery
5 жыл бұрын
Thanks Ryan! Glad you found it helpful 😊
@grantmarshall9448
2 жыл бұрын
Gotta say your review and explanation. Of how it all goes together helped me immensely compared to the instruction book. Thank you for a great video
@AverageJoesJoinery
2 жыл бұрын
Thanks Grant! Glad it was of help mate :)
@ry4no
2 жыл бұрын
I know i'm a bit late to the party but i was researching getting one of these and your video popped up. This was a great video, clear and concise. really well done! Thank you.
@AverageJoesJoinery
2 жыл бұрын
Thank you! I’m really glad it was of help 🙏
@FiarazIqbal
2 жыл бұрын
Have to say, excellent review, clear and concise. Just picked mine up and looking forward to playing on my day off. Top job
@atteljas
5 жыл бұрын
I got one of these. Its a cheapish Finnish private label jointer/thickness planer. And funnily they propably make these by hundreds of thousands and label them differently. For a small shop it does what I need. Price for value ratiois very good in my opinion
@AverageJoesJoinery
5 жыл бұрын
They definitely seem to have a standardised machine that gets a lot of relabels. Cant go wrong for the money though. Its paid for itself numerous times over now
@101boertjie
3 жыл бұрын
Great review young man, it is an honest review which is what I appreciate. It shows a lot of stuff which is similar to other brands of planer/jointers which is what was after. Thanks for your views, they are appreciated.
@AverageJoesJoinery
3 жыл бұрын
Thanks Johan! Really glad you found it useful 😊
@101boertjie
3 жыл бұрын
@@AverageJoesJoinery I ended up buying a jointer/planer very similar to the one you reviewed. I know it is not the best on the market by far, BUT it works more than adequately for what I want and need to do. I bought the Ryobi JP 254 in the end, as it is all that was available in the closest large town.
@wontletthisfeelingo
9 жыл бұрын
Great video. very helpful as i'm looking to buy one of these. Its nice to see a well made review that is not drowned out with pointless music which nearly all the yanky ones are!
@roywilson3702
5 жыл бұрын
Thanks Joe, I was in the market for a planer/thickness and did have the Erbauer 1500-250mm-electric-planer-thicknesser-220-240v in my basket with Screwfix which is more expensive and your review saved me some money and stress.... and I’ve also reviewed the Erbauer as well and this planer has many issues with reliability so am going to take your advice and buy the Titan. keep up the honest reviews.
@AverageJoesJoinery
5 жыл бұрын
Thanks Roy. I havent got hands on experience with the Erbauer but from what Ive heard its very similar performance wise. I dont think you can go wrong for the money with the Titan
@roywilson3702
5 жыл бұрын
Hi Joe, I looked at the reviews for the Erbauer and there was many issues with drive belts snapping and the wheel that the belts fit around being not centred and not machined properly causing a wobble when in use..... from what I’ve seen I will be saying well away from the Erbauer... on this occasion more expensive does not mean more reliable.
@wayneleary4204
Жыл бұрын
Excellent no frill straight forward guide, you take your time and explain simply whats going on..well done Joe your a credit to you tube. You get my vote👏👏
@davemcd100
9 жыл бұрын
Thanks for your help Joe. Dave.
@mstargate12
7 жыл бұрын
Joe I have spent 30 minutes trying to figure out the extractor setup. Of course the Oracle that is youtube has provided the answer. Great piece and made as simple as for us Average Joe's. Thank you from Tyneside.
@AverageJoesJoinery
7 жыл бұрын
+mstargate12 Thanks mate! The extractor can be a pain on this but safety first I guess haha glad you found the video helpful 😊
@kathrynharrison549
3 жыл бұрын
ordering one tomorrow after seeing your review
@AverageJoesJoinery
3 жыл бұрын
Thanks Kathryn! Glad you found the review helpful 😊
@beccaatkinson3070
6 жыл бұрын
I had a quick look at this review as I was looking to buy one myself and decided it will do for what I need. I would like to comment that at 0.35 in the video, the stop switch is spring loaded and pulls up vertically allowing release of the catch and the start switch to be accessed with ease. All reviews that I have seen state that the switch isn't much cop. I think people haven't quite understood the operation method of the switch.
@AverageJoesJoinery
6 жыл бұрын
+Becca Atkinson Thanks Becca! Glad you found the review helpful. I feel like a right idiot with the switch haha
@beccaatkinson3070
6 жыл бұрын
+Average Joe's Joinery Sorry, it wasn't a negative comment lol
@AverageJoesJoinery
6 жыл бұрын
I didnt take it negatively lol sorry
@mr.b.w.3146
6 жыл бұрын
I have an Erbauer version of this and changing from thicknesser to planer is the same. When I use the planer I jam a piece of wood on the inner platform and raise it up under the switch. It means a lot less buggering about with bits of plastic.
@AverageJoesJoinery
6 жыл бұрын
I do the same haha I cant really advise it though
@astracash
7 жыл бұрын
Easy to follow and an honest review, thanks Joe for making things clear for us beginners - keep up the good work.
@AverageJoesJoinery
7 жыл бұрын
+astracash Thank you! Im really glad you found it helpful 😊
@SteveZodiac777
8 жыл бұрын
Mine was delivered this morning from Screwfix - I only ordered it yesterday afternoon so well done them! Had a slight hitch when the planer infeed table wouldn't move - turned out that the small allen screw had been done up too tight so slackened it off a little and all's well. Tried it out on some sawn green oak and the finish is very good indeed! It is a noisy machine so ear defenders are a must. Thanks again Joe!
@AndyUK-Corrival
6 жыл бұрын
I have that machine, Great bit of kit for the price. I made a circle of wood to fit the dust extraction port and then drilled a hole in that for my shop at. Works ok, gets a bit clogged but easy to clear and less dust.
@AverageJoesJoinery
6 жыл бұрын
Its brilliant for the price. Cant go wrong 👍 good idea about making your own adapter 😊
@robw1950
3 жыл бұрын
Ive just built mine up today and was puzzled about a couple of things. Your video has helped me with them. Thank you
@semiherinc6976
7 жыл бұрын
clear, simple, straight review. just got one and this video replied all questions in my mind. thanks for sharing
@AverageJoesJoinery
7 жыл бұрын
Thanks mate! Really glad you found it helpful :)
@keithwillis8443
9 жыл бұрын
Hi Thanks for the fast reply. The method is simple. UNPLUG THE MACHINE BEFORE DOING THIS! 1. lower the infeed table 2mm. 2. Rotate the blade drum close to the outfeed table. 3. use a flat piece of wood about 10 inches long. 4. Place the wood lengthwise across the blade drum from the outfeed table (not touching the blade at this point) until it just overlaps the iedge of the nfeed table. 5. With a pencil mark the wood where it overlaps the infeed table. 6. Now holding the wood steady with your left hand rotate the blade drum with your right. 7. The blade should catch the wood when it hits top dead centre and move it a little over the infeed table. 8. Now mark the wood again where the edge of the infeed table is below the wood. 9. There should be a gap between the two pencil lines of between 3 to 6mm. Basically place a bit of wood across the blade drum, rotate the drum and the blade will touch the wood and move it forward. The amount the wood moves is dependant upon the height of the blade! Do the test twice on each blade once near the fence and again at the front to see if the blades are level with the outfeed table. OR search for this on youtube: woodworking - Setting Jointer Knives.mp4 Cheers and thanks for your help - keith
@johngrannan
7 жыл бұрын
Thanks Joe. Clear & honest...
@AverageJoesJoinery
7 жыл бұрын
Thanks John! Glad you found it helpful :)
@dominicphelan6572
2 жыл бұрын
This is the most helpful video . Thankyou. I couldn't workout the dust extractor but your video solved my problem straight away . Thank you so much please keep making the videos you are straight forward uncomplicated and VERY HELPFUL and interesting
@uncelsminor
6 жыл бұрын
This is the second time I watched this review. Excellent in depth review and I am convinced this is the one for me. I have bought titan before and not been let down. This review has confirmed my choice. Thank you.
@AverageJoesJoinery
6 жыл бұрын
Thank you Simon! Really glad you found it helpful :)
@uncelsminor
6 жыл бұрын
Looking on eBay and the unsafe push blocks came to mind. Maybe attach some rubber feet bumpons ? Give extra grip and possibly be used then. 3m make them. A back up in an emergency ?
@memduherdogar150
3 жыл бұрын
Good informative review, just took back electric planer I bought back and going to buy one of these thanks to your review.
@michelleperkins7797
4 жыл бұрын
What a great review. Many thanks.
@AverageJoesJoinery
4 жыл бұрын
Thanks Michelle! Glad you found it helpful 😊
@malwright8771
6 жыл бұрын
Nice 1 Joe I was looking to buy one of these and found it like you at screw fix. Your review has made my mind up. Thanks buddy cool review.
@AverageJoesJoinery
6 жыл бұрын
Thanks mate! Glad you found it helpful 😊
@benhewson81
7 жыл бұрын
I've been looking at a few new purchases and the reviews out there can be so vague and unhelpful, yours however was straight to the point and covered things like the actual use and day to day needs of the average small shop user. Well done, liked and subscribed.
@AverageJoesJoinery
7 жыл бұрын
+Ben Hewson Thank you Ben! Im really glad you found it helpful 😊
@jonbishop1385
5 жыл бұрын
Joe, those push blocks,..... the fabric that's under your jointer, cut 2 pieces to size with a bit of spray glue,stick them on your push blocks, it will solve the problem of them slipping
@AverageJoesJoinery
5 жыл бұрын
Thanks Jon! Adding that material would be a big help for sure 👌
@1habicher
5 жыл бұрын
My thoughts too! Rubber sole or leather will work too.
@robertocorradi6318
6 жыл бұрын
Thanks Joe ........... Good honest once more . This bit of kit looks like it will save us a lot of work ....... appreciate your time . Thanks again & all the best .
@AverageJoesJoinery
6 жыл бұрын
Thanks Roberto! Its definitely saves a lot of time and effort. It paid for itself numerous times over
@ianvicedomini2648
2 жыл бұрын
I have to say I’ve been thinking for a long time about purchasing one of these and after watching this review and how clearly you’ve explained things about it, I’m very strongly considering it. A super review and an excellent video joe. Now subscribing mate.
@petehowell266
7 жыл бұрын
thanks joe,i am just setting mine up,glad someone put a review up,it helps
@AverageJoesJoinery
7 жыл бұрын
Thanks Pete! Im glad you found it helpful :)
@bobh7410
4 жыл бұрын
Good review bud, i've had this machine for a couple of years now and I love it, I have a few Titan tools and swear by them. The 2 flat pushers, I bought a couple of sheets of self adhesive foam rubber, stuck that on the bottom of each pusher, no more slipping it worked a treat.
@AverageJoesJoinery
4 жыл бұрын
Thanks Bob! Definitely cant fo wrong for the money. You drop on a gem sometimes with these cheaper tools
@Paul_C83
9 жыл бұрын
Excellent review, for a hobbyist doing casual work its looks like it will hold up very well, shall be getting myself one too.
@davidbrigden4194
7 жыл бұрын
Thanks for the review Joe. I'm in the market for a planer/thicknesser and as I have other Titan products that have proven to be well made, dependable and at a price that doesn't break the bank, I checked out your review. I have decided that I will go with the Titan based on my past experience with the brand and your review. many thanks.
@AverageJoesJoinery
7 жыл бұрын
+David Brigden Thank you David! Im really glad you found the review useful 😊
@TheClembo
6 жыл бұрын
Very comprehensive review, just got one and now know what to expect, thank you.
@AverageJoesJoinery
6 жыл бұрын
Thanks Charlie! Glad you found it useful 😊
@timhunter452
9 жыл бұрын
Thank you for the response and reassurance about the fence. Mine arrives tomorrow!
@sirkildalot8409
9 ай бұрын
Just bought one today from Screwfix. £199. Used it to plane up some Accoya which i needed to glue to make some weather bars for a garage door. Does the job. I don’t find the dust extraction too much of an issue - one nut to remove and two threaded screws to reattach. Not too bad. The push blocks are horrible. I’d put this in the same category as my Excel table saw. Great for the money.
@dogfinger67
4 жыл бұрын
Thanks for a no nonsense review.🙂
@AverageJoesJoinery
4 жыл бұрын
Thanks mate! Glad you found it helpful
@caterhamnut
3 жыл бұрын
Thanks Joe - excellent review....and the update one as well, a few years later....I have just bought a Macallister MPT 1500 (in France, but I think it is same in B&Q) and it looks almost identical to this model - no doubt same factory.....cheers
@mikebeaumont137
4 жыл бұрын
Thanks very much you have now put my mind at rest wonderful review.
@AverageJoesJoinery
4 жыл бұрын
Thanks Mike! Glad you found it helpful 😊
@duvalian
3 жыл бұрын
Great review mate, and thanks for the honesty too. I’ve just gone firm on this purchase and will order in the morning. 😎👍🇬🇧
@AverageJoesJoinery
3 жыл бұрын
Cheers mate! Glad it was of help 😊
@johnjacobs8568
7 жыл бұрын
Thanks for this review matey. Great stuff. I had already bought it and was looking for some clear instruction on a couple of things. You hit all the right buttons for me and I am now happily planing away!
@AverageJoesJoinery
7 жыл бұрын
+John Jacobs Thank you John! Im really glad you found it helpful 😊 have fun with your new planer 👍 its a great bit of kit
@johnj5788
4 жыл бұрын
Great review Joe, very helpful and thanks for taking the time to video. All the best.
@AverageJoesJoinery
4 жыл бұрын
Thanks John! Glad you found it helpful 😊
@markharris5771
5 жыл бұрын
This is extremely useful for a newbie like myself, thank you very much indeed.
@AverageJoesJoinery
5 жыл бұрын
Thanks Mark! Really glad you found it helpful :)
@dofeman1959
4 жыл бұрын
Great review thanks for taking the time
@AverageJoesJoinery
4 жыл бұрын
Thanks Pete! Glad you found it helpful 😊
@joaquimalves1970
5 жыл бұрын
Great and honest review Joe! Loved it! Cheers from Portugal...
@AverageJoesJoinery
5 жыл бұрын
Thanks mate! Glad you found it helpful
@robertmilligan3950
4 жыл бұрын
Brilliant clear and instructive review. I am thinking of getting one but wondered how it performed for the price and you sold it to me. Many thanks.
@AverageJoesJoinery
4 жыл бұрын
Thanks Robert! Really glad you found it helpful 😊
@RobBerryblues
6 жыл бұрын
Brilliant review, to the point , most reviews talk a lot but dont give any useful information for ages, this guy told me what I wanted to know straight away. thanks!! love the accent by the way :)
@AverageJoesJoinery
6 жыл бұрын
Thanks Rob! Glad you found it helpful. I always look at reviews before buying anything and like you say half the time they just waffle on about irrelevant stuff lol
@9111logic
4 жыл бұрын
An absolutely smashing review joe, thank you so very much. I'm so glad i search for this before purchasing one myself cause I didn't think Titan was such a good make after having had experience with some of their gardening tools. Now, thanks to your video, I shall confidently buy one myself and if necessary make some minor modifications if and where needed in order to speed up the swapping mode process. Thank you so much
@AverageJoesJoinery
4 жыл бұрын
Thanks mate! Really glad you found it helpful. Its not often the ‘cheaper’ tools actually turn out to be pretty good but when they do its a no brainer haha
@jelly11666
6 жыл бұрын
Bloody good review, far too many people rattle on about irrelevant stuff that I don't need to know when doing reviews. Your review was concise, informative and to the point. Top job.👍
@AverageJoesJoinery
6 жыл бұрын
Thanks mate! Im glad you found it helpful 😊
@davidriches3858
5 жыл бұрын
Just saw your review Joe, very good and helped me to make a decision. Thanks again.
@AverageJoesJoinery
5 жыл бұрын
Thanks David! Glad you found it helpful 😊
@dodgygeezah4707
4 жыл бұрын
Thanks for the excellent review mate. You've answered all my questions and more. I'm off to buy one now ☺
@AverageJoesJoinery
4 жыл бұрын
Thanks mate! Really glad you found it useful 😊
@cookandclimb2742
4 жыл бұрын
Excellent review! I was maybe going to get one of these, but now I definitely am!
@AverageJoesJoinery
4 жыл бұрын
Thanks mate! Glad you found it helpful 😊
@chasrobinson1240
4 жыл бұрын
Great revue , Am waiting for delivery as I write
@AverageJoesJoinery
4 жыл бұрын
Thanks Chas! Glad you found it helpful 😊
@chrisphillips1948
2 жыл бұрын
Thanks Joe. Just about to buy one. Great review 👍
@jof1953
6 жыл бұрын
Excellent review! Very thorough and clearly explained.
@AverageJoesJoinery
6 жыл бұрын
Thanks mate! Glad you found it helpful :)
@littleshedstudio2592
8 жыл бұрын
Excellent review you've convinced me, It looks to be just what I need, Thanks Joe
@RayShaw007
5 жыл бұрын
A good, honest, straightforward review. Thank you for sharing your experience of this product. (Oh, and thank you for educating me on the workings of a planer/thicknesser!)
@AverageJoesJoinery
5 жыл бұрын
Thanks Ray! Really glad you found it helpful 😊
@bryandowdey1779
4 жыл бұрын
Thanks Joe. good honest review. I've just bought one and it works great so far.
@tonyhopkins4399
4 жыл бұрын
Great review Joe, helped me Had problems fitting the dust exractor, your video explained it
@AverageJoesJoinery
4 жыл бұрын
Thanks Tony! Glad you found it helpful 😊
@garrysmythe
7 жыл бұрын
brilliant review How, big thanks cos you have managed to make my mind up, I was kinda decided on buying a 12 inch, but after watching this ,it became apparent that this would sort out all my dig needs , so from me here in Barnsley Yorkshire, a big big thank you
@AverageJoesJoinery
7 жыл бұрын
+garry smythe Thanks Garry! Really glad to hear you found my review helpful. I cant speak highly enough of this planer. It has payed for itself multiple times over now. So glad I bought it and didnt stump up more money for a better known brand 😊
@christopherhighcock7363
7 жыл бұрын
brilliant piece of kit. And your right about the push blocks "crap." Good video too mate. Thanks 👍
@AverageJoesJoinery
7 жыл бұрын
+Christopher highcock Thanks Christopher! Im glad you found it helpful 😊
@x2lls
5 жыл бұрын
@@AverageJoesJoinery I would suggest sticking some grip on them, rather than pay out more. Great review btw!
@garysheehan381
6 жыл бұрын
Thank you Joe. clear and concise with the viewer in mind.
@AverageJoesJoinery
6 жыл бұрын
Thanks Gary! Glad you found it helpful :)
@edwardgrabczewski
5 жыл бұрын
Sanding down the rubber surface of the Push Blocks and rubbing them against one another for half an hour softened them up a bit and increased the friction significantly. It doesn't help that the plastic surface isn't flat though!
@AverageJoesJoinery
5 жыл бұрын
I definitely wish they added something that was more grippy straight out the box. When I got mine it was just a hard moulded plastic... not good
@edwardgrabczewski
5 жыл бұрын
@@AverageJoesJoinery I bought some yellow push blocks on Amazon that look the same as the Titan ones but have a spongy surface. Compared to the Titan they're much more grippy - and they're also flat!
@pratty222
6 жыл бұрын
slide the emergency button up Joe, then it opens easily. You don't have to release the clip with your nail. Thanks for the review.
@AverageJoesJoinery
6 жыл бұрын
Thanks Marc! Glad you found it helpful :)
@korehan1850
7 жыл бұрын
Well done Joe. I watched it with interest. I love your mannerism in explaining. Great Video of the product. I will buy one now.
@AverageJoesJoinery
7 жыл бұрын
+Korehan Dora Thanks mate! I hope that I have improved a lot with my videos since this one lol I wish I could go back and improve the video quality but Im glad a lot of people find it helpful 😊
@petecooper4412
6 жыл бұрын
Thanks Joe. Pete on the Isle of Wight.
@AverageJoesJoinery
6 жыл бұрын
Thanks Pete!
@JimAckroyd
7 жыл бұрын
I've been thinking about buying one of these. After you great review, I've made my mind up to get one. Thanks Joe
@AverageJoesJoinery
7 жыл бұрын
+Jim Ackroyd Thanks Jim! Im really glad you found my review helpful 😊 you cant go wrong for the price 👍
@mr.b.w.3146
7 жыл бұрын
Nice review. Clear and concise, I now know what a planer thicknesser is! Thanx for good review.
@AverageJoesJoinery
7 жыл бұрын
+Dr. Badly Crumble Haha thanks mate! Im glad you found it helpful. A planer thicknesser is a very handy tool to have 😊
Пікірлер: 882