I do pressure washing and when i do roof washing customers always ask if i know how to change broken roof tiles i think its time to learn ..great video 👍
@larryhawkins8311
3 жыл бұрын
Thanks, great information! Just what I needed.
@Think374
11 ай бұрын
Finally found the answer! Thanks! Good video!
@sergeysutorin9597
3 жыл бұрын
It is the best DIY video for tile replacement I've ever watched. As usual the better video you see the more it is underrated. Thanks a lot.
@erniepenny221
4 жыл бұрын
Thank you, helped a lot.
@michaelcostello6991
3 жыл бұрын
Great demo. Thanks
@DConstructiveCritic
2 жыл бұрын
Great video, very informative. Thank you
@johnwilson3140
2 жыл бұрын
Great job and well explained.
@stanwizz2351
Жыл бұрын
UK, we have a lip at the head onto a roofing batten, as well as two galvanised clout nail holes, every second row usually nailed but that ratio can vary, but ta for the upload.
@marval550
2 жыл бұрын
Dynamic explanation! Love that you improvised by making your own tool! You just helped out this DIY gal and many others!
@nhzcx123
3 жыл бұрын
The glue will block Watercourse mate.
@panfilosorrillo1725
Жыл бұрын
Great video, thanks.
@stephenlepore4476
Жыл бұрын
awesome. thanks man.
@Mitomasterclass
Жыл бұрын
If you do a lot of repairs it's worth using a brickies trowel to lift the whole tile from the bottom, you can use the leverage to evenly place the new tiles nibs over the baton
@ivanzepeda6216
Жыл бұрын
By far the hardest way to change out a tile
@texasRoofDoctor
2 жыл бұрын
That was pretty slick. I have never seen mod bit under tile before though.
@brenes7
3 ай бұрын
Good job thanks
@vcolet2011
2 жыл бұрын
what did you use to cut the knotch in the rebar
@eblanks100
2 жыл бұрын
Good Morning, thanks for showing me how this is done. Can you refer a French tile roof repair company in Chicago, IL?
@jowflow2
3 жыл бұрын
audio quality sucks but very informative, thanks!
@alansmith2203
3 жыл бұрын
thanks Mate. gives me hope that i won't screw up my job too badly....smile
@aci7one1
2 жыл бұрын
Wow we don't screw tiles down in NZ, what a pain. We nail every second one so u can easily kick up one of the tiles above an replaced even easier. Double screw would only be in high wind areas an a major pain for roofers. Good video anyway 👍
@precisionroofconsulting1713
2 жыл бұрын
We are in Florida. It is a high wind zone and everything is a pain when it comes construction design
@Justthetruth5678
4 күн бұрын
Couldnt you use a drill and a right angle adapter and unscrew the old screws and put new ones in? Looks like there is plenty of space when you pull up the top tile
@JGraham63
Күн бұрын
The screws are 3" and installation specs only allow for up to 2" of nose deflection.
@Justthetruth5678
Күн бұрын
@@JGraham63 look up right angle drill hex driver.
@FFlyDDrum1
3 жыл бұрын
I have been trying to find that very tile to replace some cracked ones. What is the name of the tile?
@precisionroofconsulting1713
3 жыл бұрын
This tile is a Boral Villa 900. But there are quite a few tiles that look very similar to this one with slight differences in the size and interlock, none of which are compatible with one another. I would be happy to help you identify your tile if you want to send me a few profile shots. The stamp on the back will tell me a lot, but we can usually identify with just a few decent photos of the tile and interlock. You can email them directly to me at Joe@PRC-FL.com.
@FFlyDDrum1
3 жыл бұрын
@@precisionroofconsulting1713 the old tile was vanguard roll. I got a sample of the villa 900 and it was not aligned. Do know where I can find a similar groove pattern and size?
@precisionroofconsulting1713
3 жыл бұрын
Nothing fits with Vanguard Roll other than Vanguard Roll as is the case with almost all concrete roof tile. There are a few distributors out there that deal in salvage tile though. My local go-to boneyard here in Central Florida is All Points Tile & Slate. Unfortunately, they are completely out of Vanguard at the moment. Tile Roofs Inc. Is probably your best bet. They’re in Indiana, but ship nationwide. www.tileroofs.com.
@coreyayers8575
2 жыл бұрын
Honestly dewalts 90° bit driver works great its 20 bucks
@XqeDiosxqe
Жыл бұрын
Can someone please tell me the name for that tile ?? I have the same ones....
@JGraham63
Жыл бұрын
That one is a Villa 900. However, there are a dozen different profiles that look almost exactly the same but are not compatible because of very small difference in size or interlock.
@ganeshrawatmonierrooping193
2 жыл бұрын
R oo p
@BobTheHatKing
3 жыл бұрын
Great video but sound is very quiet. Had to turn it full blast
@mcamodell
3 жыл бұрын
Umm, but its the edge tiles that always break, why not show that repair...
@phillipsierra2074
3 жыл бұрын
Dude.....Shut Up.
@Rogue951
8 ай бұрын
Can't hear you hardly.
@onthemountainwithmike1378
2 жыл бұрын
Have you ever used one of these to get tiles and tools up the roof? kzitem.info/news/bejne/mY1nm4yie2V_ZZw
@GladiatorReid
3 жыл бұрын
Sound terrible
@buenahomes
Жыл бұрын
never trust to repair your roof a man wearing golf clothing.
@JGraham63
Жыл бұрын
I can’t say that I disagree 😄
@buenahomes
Жыл бұрын
@@JGraham63 the side channel in that tile roof is supposed to remain unobstructed , otherwise water will be stuck and back-flow creating another opportunity for a leak.
@thomaselliott573
Жыл бұрын
looks like it would be a far more difficult job to repair a tile that had been installed this way
Пікірлер: 47