2015 3.7L supercharged Q50 gets a replacement engine and we convert the 7 speed automatic to a 6 speed manual transmission from a 370z. This is not a compressive video and it is not meant to be a step-by-step guide. This overview shows the process I used to remove the old engine/trans combo and transfer the new engine/trans into the car. Below is a quick list of parts I used to swap in a 6MT on the 2014-2017 3.7L Q50. Newer VR Q50s will be similar but the bolt pattern may be different on the bellhousing.
* This video is only for reference and I am not responsible for your actions *
ECU explanation - Ecutek ROMs for the Q50 are supported for 6MT conversion. Consult with your tuner.
Parts I bought :
- 370z 6spd manual transmission.($1,000).
- G37 manual pedals.($80).
- Torque solution billet aluminum 370z trans mount($160).
- G37 coupe trans crossmember($65).
- 370z clutch hard lines ($65).
- Master cylinder ($80).
- Z1 CSC elimination kit ($450)
- Spec dual disk SS trim clutch ($1,230).
- custom 3.5” one piece steel driveshaft($600).
- 3 quarts Motul 75w90 ($60).
- ARP #102-2201 for pressure plate ($18).
- ARP #254-2801 for flywheel ($44).
A general knowledge of mechanics and engine removal is suggested but you can use the FSM (factory service manual). Everything that isn't explained is pretty much bolt up and if modification was required, I explained in the video. Again this is just an overview and your experience may vary. Let me know if I can help!
Негізгі бет Автокөліктер мен көлік құралдары Infiniti Q50 6 Speed Manual Transmission Swap
Пікірлер: 148