No need to apologize brother Jeff. Life always gets ahead of us. Family and house is always first. Awesome vid man 👍
@eastsiderc
Жыл бұрын
Well thank you brother I appreciate that for real! Hope you have a blessed day!
@DrJT-ly3vr
Жыл бұрын
Thank you! Never built one yet, but it's great to watch in advance!
@eastsiderc
Жыл бұрын
Well thank you brother! I hope you are having a blessed day!
@kgm5512
Жыл бұрын
Great build Jeff! I did mine not to long ago and I figured out the brass plates during my dry fit! 😂😂 all good bro. Can’t wait to see it rippin!
@eastsiderc
Жыл бұрын
😂😂😂 I have built many of these however I just was not totally in the right frame of mind and made a mess 😂 but it all work out! I bet you I never make that mistake twice!! 🇺🇸🤝
@kgm5512
Жыл бұрын
@@eastsiderc no sir! But somehow always put the cups on before the outside bearing no matter how many times I re build a diff 🤣😂🤣
@eastsiderc
Жыл бұрын
😂😂😂 well I have done that too! Then you wanna cuss 😂😆
@Victic005
Жыл бұрын
That's a big drive cup!
@eastsiderc
Жыл бұрын
It is brother and it’s my hands-down, favorite
@Joes5thscalercandguns
Жыл бұрын
Heck yea wrenching tech tips👍👍🤜🤛
@eastsiderc
Жыл бұрын
Thanks brother have a great day bro!
@ryanhardison8030
Жыл бұрын
No worries thanks for posting
@eastsiderc
Жыл бұрын
Hey Ryan thanks brother! Im glad no one cares that I broke my word. 🤝 have a great day bro
@eddierivera8910
Жыл бұрын
Great Vid And Tech Tips 👍 Clean and Right and Tight.
@eastsiderc
Жыл бұрын
Thanks Eddie I hope you have a blessed day bro!
@soblessed6438
Жыл бұрын
Hey son as always very informative for everyone. I cracked up when you said this only liberal thing I do 🤣🤣🤣. Love you!
@eastsiderc
Жыл бұрын
😂😂🤣 I knew you would catch that mom too funny.
@rcalchemy766
Жыл бұрын
Thank You for the detailed Diff Build Video Bro!!! Cheers from OIIIO \m/
@eastsiderc
Жыл бұрын
Absolutely brother Pete! Great talking to you brother I hope helped you decide on some things! 🙏🇺🇸🤝🤝🤝
@Blue_Smoke_81780
Жыл бұрын
Great wrenching vid diffs can be tricky gotta love that 1m diff fluid I rebuilt my diffs not long ago for the 30N with the 1m great stuff ☠️🛠👊👍
@eastsiderc
Жыл бұрын
Thanks brother it is good stuff! I was happy to get a bottle . Its always out of stock at hobby town! Hope you have a blessed day bro!
@tonymanna9160
Жыл бұрын
Good stuff brother. I will use this when I finally get my second aluminum transmission happy! Lol Glad to see you posting and no need to apologize.
@eastsiderc
Жыл бұрын
Thanks brother Tony! Yeah man Im doing pretty good. Better every day! Appreciate you bro! Hope you are having a blessed day
@biged1703
Жыл бұрын
Hey son good video as always 👍you got all the best of the best stuff to make it all work right 😎
@eastsiderc
Жыл бұрын
Thanks Dad glad you liked it man! And I sure do.
@islandrc-duke1972
Жыл бұрын
Cool video and great build
@eastsiderc
Жыл бұрын
Thanks brother! 🤝Hope you are having a blessed day
@joshchatwin8569
Жыл бұрын
Hello Jeff awesome stuff the only person I can find to build one of these can't wait till mine comes what bearings are those got a link and the diff cups wow
@eastsiderc
Жыл бұрын
Let me round of some Info for you brother I’ll get back to you.
@eastsiderc
Жыл бұрын
Nation Skander is where I got the bearings bro. Sorry I got busy yesterday. I can’t remember the number of the bearings but you can buy a whole a whole hpi Baja bearing kit from them and it’s cheaper than just getting the two bearings
@moneyoverbeef
Жыл бұрын
Very informative as always where can I get some of them electric bearing for the outside diff cup?
@eastsiderc
Жыл бұрын
I got them from California a company called Nation Skander ! Hope you have a great day bro!
@moneyoverbeef
Жыл бұрын
@@eastsiderc By any chance can you give me the size of the bearings.
@eastsiderc
Жыл бұрын
@@moneyoverbeef Im assuming you are talking about the big outter bearings because now the IRC comes with oil impregnated bushings only for super stability. So with that being said the big bearings are 20x32x7 6804-2RS have a great day bro!
@moneyoverbeef
Жыл бұрын
@@eastsiderc Yes thank you very much!!
@eastsiderc
Жыл бұрын
@@moneyoverbeef you’re welcome
@kaobigdog1
Жыл бұрын
Do you have a video of how to get the rear diff out of the car? My baha ext was running fine for a while last night and then all of a sudden it's just revving out and barely moving. Spinning the wheels by hand both wheels move. I think either the diff split or a clutch problem
@eastsiderc
Жыл бұрын
I dont think I have a diff removal bro. You will have to pull the whole transmission if you dont have a three piece trans case. If you turn one wheel and the other turns then the diff is probably okay. Not moving and revving out is caused by either an axel pin has broke or a diff pin inside the diff under the bigger gear spider gears could be broke as well and causing it to free spin.
@kaobigdog1
Жыл бұрын
@@eastsiderc broken dog bone pin for the second time. I think maybe the smaller tires aren't helping the matter. Ordered replacement dog bones and gonna put the stock tires back on. If that doesn't help I will save up to order the innovative rc UHD axles with the UHD drive cup kit.
@drazticmeasuresrc7534
9 ай бұрын
What size bearings you use for the inside ?
@eastsiderc
9 ай бұрын
hey bro 15mm OD 10mm ID and 4mm thick I sell bearing kits for bajas too very nice ABEC-1 quality smooth rolling bearings . and these come in the kit. 4 of them. under extreme power bushings should be used in place of the bearings. Thanks for watching
@eastsiderc
9 ай бұрын
If you don't have a baja I have quite a few of these bearings if you find me on Facebook under Jeff lohr we can make a deal!
@Grandpasrcbarn
Жыл бұрын
Awesome video yeah I don’t like silicone either stuffs messy
@eastsiderc
Жыл бұрын
Brother Judda I got it all over my fingers 😂😂😂! That 1 milly didnt wash off so well. I had to wipe it off good with paper towels and wash my hands a couple times with dawn dish soap. I need to find something that cuts silicone better! Maybe mineral spirits I dont know. I need ask my buddy Allen Im sure he will know whats best to use! Hope you are having a blessed day brother
@thatoneguy2756
Жыл бұрын
@@eastsiderc that diff "fluid" look more like shoe goo then fluid. Guess it's great for field play, or drag racing. Curious what weight recommended for dirt off road track use? That diff turned out nice, tolerances looked great on everything.
@Grandpasrcbarn
Жыл бұрын
@@eastsiderc Every day I get to put my hands together on the side of the dirt is a good day and try a lacquer thinner for cleaning your hands lacquer thinner strong it’ll dry your hands out but it usually gets all the yucky stuff off
Пікірлер: 51