Setting Klipper up can be overwhelming to us newbies. But thanks to channels like this, I'll take the plunge and dive right in uncharted waters. It's about the journey, my friend. Thanks for all the invaluable lessons. Btw, nice bedslinger you've got there.
@ChrisRiley
Жыл бұрын
Thank you, I'm happy to help!
@321shock9
11 күн бұрын
Clear explanation! Thanks
@ChrisRiley
6 күн бұрын
Awesome, glad it was helpful.
@woodwaker1
Жыл бұрын
Chris, great job explaining this, and thanks for breaking it into 2 parts. The ADXL will be great to see, but this helps with understanding what is happening.
@ChrisRiley
Жыл бұрын
Thanks Dave!
@karenstevearmstrong4594
Жыл бұрын
Thanks Chris, great timing. I just finished my 2.4 r2. So I'm ready for tuning. This was a great explanation and walk through. Thanks again, Steve
@ChrisRiley
Жыл бұрын
Thanks Steve, more to come!
@OldCurmudgeon3DP
Жыл бұрын
The cool thing about tuning tower is that it works (I believe) with any command that can be entered by CLI.
@ChrisRiley
Жыл бұрын
Not sure what all will work, but I know there are a couple of different things you can do with it. Lots of cool features baked in.
@alexanderscholz8855
Жыл бұрын
Please make a viedo about Inputshaper at Marlin 2.1.2!! Please!!!
@ChrisRiley
Жыл бұрын
I'll see what I can do!
@alexanderscholz8855
Жыл бұрын
@@ChrisRiley NIIIIIICE and Please
@giulianofrassineti2717
Жыл бұрын
As an alternative you can try GH Enterprise Smart Shapers
@OneHappyCrazyPerson
Жыл бұрын
You will be the first, will draw tons off views.
@fail_fast
Жыл бұрын
This please!
@cpace123
Жыл бұрын
My SD card on my SUNLU S8 printer died. I was forced to try klipper. So far so good. I did a manual input shaper, while waiting for my 345 board. Can't wait to see the difference.
@ChrisRiley
Жыл бұрын
Awesome, Input Shaper is a lot of fun to experiment with.
@purefunked
Жыл бұрын
I think a lot of folks who got a sonic pad will be very happy to have this series. Great Job
@ChrisRiley
Жыл бұрын
Thank you!
@Bennett_Lab
Жыл бұрын
The accelerometer that comes with the sonic pad negates the need to do these tests
@purefunked
Жыл бұрын
@@Bennett_Lab While you are correct, I think many people are having issues getting their accelerometer to work or do not have a good place to mount it into their machines. I know I have directed a few people this way to check out this video. Chris also gives good explanation as to what is going on, so even if they are able to plug and play their accelerometer this will allow them to have a better understanding.
@Sergiodj453
Жыл бұрын
I’m thinking I may eventually build a Voron, but not until I complete the projects I’m currently doing. I’m building the Micro Jib by Mechanistic and the comes the Candy claw.
@woodwaker1
Жыл бұрын
Will be interesting to see your Candy Claw
@ChrisRiley
Жыл бұрын
Super excited to see the Candy Claw!
@subwolf2198
Жыл бұрын
do we need to re enable anything in the slicer settings after the test is done? like the machine limits?
@ChrisRiley
Жыл бұрын
Not with Klipper for the most part. All the slicers I see don't inject klipper commands. I would still leave accel control off if you have it.
@rueben68
Жыл бұрын
This is great information. I was doing this yesterday but was getting nowhere with it. I’m using the Sonic Pad with the Anycubic Vyper and in the pads last update they fixed the issue for resonance measuring and now I can do it with the included sensor. Thanks for this great video.
@ChrisRiley
Жыл бұрын
Glad it was helpful!
@FreeEnergyNerd
Жыл бұрын
well this is fascinating.. i just ordered the creality sonic pad (will be here next monday) i read it includes a sensor that automatically configures input shaper. I am following your explanations closely, so i will (hopefully) be able to use your configuration and compare it to the automatic one of the sensor. Thanks for being so clear!!!
@ChrisRiley
Жыл бұрын
Thanks for watching. Good luck with your projects!
@mfeldheim
9 ай бұрын
Another important question to consider is the placement of the accelerometer. I've integrated mine into the EBB42, which means it can't be positioned as close to the nozzle as a separate ADXL345 board. Do you think this physical positioning on the extruder stepper might skew the readings to a point where they're not useful? Are there configuration parameters that accommodate a probe position on the opposite side of the x-carriage? (I'm using an Ender 5 where the gantry, not the build plate, moves in the x and y axes.) Wouldn't you need two sensors for a printer with a moving build plate?
@ChrisRiley
9 ай бұрын
The placement of the sensor shouldn't matter that much. As long as you have it level to the axis depending on the sensor and placement. So in your case, that one sensor anywhere on the print head should do the job we are trying to achieve. And yes, you would need a separate sensor to calibrate Y if it is a moving bed.
@OneHappyCrazyPerson
Жыл бұрын
Yes yes yes thanks please more klipper setups skr e3v3 for example
@ChrisRiley
Жыл бұрын
Thanks for watching!
@pleighto77
6 ай бұрын
Chris at 8:05 setting the limit accel to decell. I not see that now. So is it still needed?
@ChrisRiley
6 ай бұрын
It looks like that part is is included in the calibration process now. I would follow the directions.
@reneearevalo8916
Жыл бұрын
Hola Chris desde Colombia, tengo una 3D tipo Delta (1200 mm. De alta), no es como las de ustedes, de fabrica ni nada de eso; la fabrique yo mismo desde ceros, no funciona con correas, trabaja con 3 husillos, y es de estructura firme, pesada en hierro la cual le da una firmeza excepcional, he realizado infinidad de piezas y tiene una desviación standard de aprox. 0,002 mm., A pesar de ser casera y para mi esto ha sido súper, pero aun quiero corregir errores similares a estos, los cuales se presentan casi al finalizar las piezas en especial a una altura de 50 mm. Aproximadamente (siempre comienza a atascar el material)... quiero dar gracias sinceras ya que sus videos a parte de otros más me han servido bastante para mejorar esos errores los cuales nunca creí poder hacerlo...
@ChrisRiley
Жыл бұрын
¡Hola, es genial escuchar esto! Su impresora suena increíble. Cuando ve un problema como usted, generalmente se trata de una fuga de calor. Intente sumergir el filamento en un poco de aceite de cocina antes de comenzar una impresión. Esto podría sazonar su descanso térmico y permitirle imprimir sin atascos.
@reneearevalo8916
Жыл бұрын
@@ChrisRiley Gracias por sus consejos, estoy tratando de hacer unos videos de como la fabrique; se que no me queda el tiempo suficiente por cuestiones de horarios en el trabajo, pero aqui la puedes ir viendo en acción en este primer video ( kzitem.info/news/bejne/maR_zmeKqXqjdaQ )... Ya uno de mis sueños esta cumplido, que fue el hacerme una de este tipo Delta, pues solo me queda tratar de poder ahorrar si algun dia tengo la FLSUN Super Racer... Gracias nuevamente por sus consejos y videos los cuales han sabido apoyar mi proyecto.
@OldCurmudgeon3DP
Жыл бұрын
OK, I saw the same vertical bands in your post tuning print that I have in my bed slinger. Spaced about the distance of belt teeth. Any suggestion to reduce them? It's actually worse on 1 side of an axis than walls on the other side of the same axis. I've already tried toothed idlers.
@ChrisRiley
Жыл бұрын
I struggle with that on a lot of printers. I have never found a good fix. Sometimes I have reduced the belt tension and switched to shafts instead of screws. It helps, but they don't go away completely.
@gerrytrouse4074
Жыл бұрын
do you need to switch off layer time goal in Superslicer
@ChrisRiley
Жыл бұрын
I don't use it, but from the sound of it, I would guess you would want to turn it off.
@CostlyFiddle
Жыл бұрын
Just a thought, could one use a thin sheet of paper and the side of a pencil lead to make an impression of the ringing which could then be used to make measurements?
@ChrisRiley
Жыл бұрын
I suppose so. Thanks
Жыл бұрын
How to define corrent motor in printer.cfg?
@ChrisRiley
Жыл бұрын
It's done with run_current like this. [tmc2209 stepper_y] uart_pin: PC11 tx_pin: PC10 diag_pin: ^PC1 uart_address: 2 run_current: 0.5 hold_current: 0.5 interpolate: False stealthchop_threshold: 0 ## Uncomment if using sensorless Y homing. driver_SGTHRS: 120 # tune this once it's working.
@dubCanuck1
Жыл бұрын
So, once you've dialed that in, do you just keep acceleration control turned off on your slicer? I have a weird situation where my acceleration is best at 600 while it's printing. But when it moves, there is resonance in the motors (E6) where I'd want to accelerate at 5K, which causes the "scraping/vibrating" sound when it moves the carriage unloaded to go away. Is there an acceleration setting you can set for moves (not moves+extrusions)? As I'm using Cura, I'd have the same question for both Acceleration and Jerk.
@dubCanuck1
Жыл бұрын
And I guess this might have already been assumed, but if you want to print faster, I assume you'll want to repeat this calibration for the new speed as resonance won't necessarily scale linearly, right?
@GoldenJaguar3D
Жыл бұрын
you don't need to turn it off cura can still control the acceleration or you can set it in klipper and let klipper control acceleration
@ChrisRiley
Жыл бұрын
👍🙂
@HakanOnurDerici
Жыл бұрын
I'm already using input shaping with klipper. This is the most clearly explained and detailed tutorial I've seen about input shaping so far. I'm longing for the part 2 with accelometer. My printer input shaper settings are made using accelometer but I'm not so sure if I've done it exactly right and if I could dial it perfectly.
@ChrisRiley
Жыл бұрын
Coming soon!
@HakanOnurDerici
Жыл бұрын
@@ChrisRiley longing for it! checking regularly if it's uploaded :) Thanks for your efforts
@AresROC
Жыл бұрын
Perfect timing dude! Have 2 Mk3s and Voron v0.1 just bought ADXL and waiting on your super detailed and helpful video! ^_^
@ChrisRiley
Жыл бұрын
👍🙂
@Duraltia
Жыл бұрын
@05:35 I've always been wondering but why just 100mm/s when obviously we will be printing at higher speeds? Wouldn't it making sense to use values for the test that resemble the speeds of 200-300mm/s we aim for? 🤔🤨
@ChrisRiley
Жыл бұрын
I think this is more of a "get you in the door" speed. 100 is a lot of speed for a lot printers out there still.
@Duraltia
Жыл бұрын
@@ChrisRiley For a moment I was like _"Uhh?" 🤔_ until I took another peek at the i3 MK3S default Quality Settings which painfully reminded me of not a single Speed setting going above 100mm/s and very few in fact making it even past 50mm/s. Gonna have to give my V2.4 another *_High5_* for not being such a slouch 😁 ( should probably do it before doing the dreaded LGX Lite + CAN + TAP Total Conversion I had planned these days 😑 )
@HipsterGandalf
Жыл бұрын
I am new to Klipper, having only started with it maybe 3 days ago. You have helped me understand parts of it so much more easily. I ran through this Input Shaper setup earlier today and just wow. I've had ghosting on my prints since I started a couple of years ago, and this has made an immediate improvement. Thank you so much. Keep up the good work!
@ChrisRiley
Жыл бұрын
Rob, that is great to hear! Thank you for the comment! Glad this is helping you out.
@SilentRush420
Жыл бұрын
👍
@ChrisRiley
Жыл бұрын
🙂
@wrxsubaru02
Жыл бұрын
Hey Chris, can you do one for the Marlin input shaping one? I tried following Teaching Tech's tutorial, but I don't see any noticeable changes in the printed model. What I want to know is if there is a way to fine tune the test gcode, like you can with linear advance... You know how you can get more precision in the increments by using that configurator? This input shaper instructions says to do .2mm layer height with the after layer change gcode and that's all I have to work with. I see a space in x and y that looks only slightly better but not enough to make a big difference in my print quality. I want a wider range of changes to narrow it down to a more precise number, or to change the values in the gcode layer change to a wider range, but I have no idea where to start.
@ChrisRiley
Жыл бұрын
You are in luck, I just completed a video for this. It will be out soon.
@wrxsubaru02
Жыл бұрын
@@ChrisRiley Awesome! hope you go into more detail about it.
@ego5267
5 ай бұрын
great video chris! I have a question, after doing the input shaping, should i recalibrate pressure advance and max Maximum Volumetric Flow Rate
@ChrisRiley
5 ай бұрын
Thank you! I would, yes, any time you adjust speed I would give these another check just to make sure they are keeping up.
@mrlanceolot7395
Жыл бұрын
I’m using Klipper, and my bed is 300X300 but it see 150X150......cannot get it set at 300 in config ...older cr10s v1...help!!!!
@ChrisRiley
Жыл бұрын
You have these settings in you config??? position_endstop: 300
@mfeldheim
9 ай бұрын
„This could possibly damage your 3D printer“ 🤔 but then I will have a well calibrated broken printer
@ChrisRiley
9 ай бұрын
LOL, exactly!
@thehappyextruder7178
Жыл бұрын
Thi is an epic series Chris once again thanks for posting !!!
@ChrisRiley
Жыл бұрын
Thanks!
@Allan-r8i
4 ай бұрын
I noticed that they made some changes on the resonance compensation page. #2 is different for example
@ChrisRiley
4 ай бұрын
I heard they changed this up, I might need to redo the video.
@Allan-r8i
4 ай бұрын
@@ChrisRiley Maybe! I still managed to use your video alongside several other resources to guide me. Thanks for your efforts!
@timm3802
6 ай бұрын
But what it the time difference on a 200mm/s print before and after input shaping? Because imo the new printer.cfg will now slow down your prints.
@ChrisRiley
6 ай бұрын
Not sure I understand, 200ms print? Are you talking about during the calibration?
@timm3802
6 ай бұрын
@@ChrisRiley Sorry for my bad explanation .... No i'm talking about the difference before the calibration, and after the calibration in time on the same STL file. What is the difference between a 200mm/s print that lasts an hour, before input shaping, and one without input shaping. Because as I see it, the input shaping will slow down the print speed, so it will look nicer, but takes longer time to print. Isn't that correct?
@ChrisRiley
6 ай бұрын
@@timm3802 You are correct, when enabling input shaping it COULD slow it down, but the idea is to find the resonance of each axis and filter it out. The filtering could impact speed, but mostly not. The filtering mostly impact how the different parts of the prints are preformed. Like the corners tend to be smoothed and not as pointed if filtering becomes too much.
@ScottLahteine
Жыл бұрын
Marlin will be gaining more improvements to Input Shaping over the coming months thanks to contributions from Ulendo.io so stay tuned!
@ChrisRiley
Жыл бұрын
Thanks Scott! Looking forward to it!.
@seanequisenberry6699
Ай бұрын
Great Video!
@ChrisRiley
29 күн бұрын
Thanks!
Жыл бұрын
I've been using klipper for some time and recently bought the accelerometer, but I'm using orange pi zero2 with skr1.4 turbo and I've not gotten into connecting the accelerometer to the orange pi. I've read some topics about using arduino nano that is connected to mcu as a helper because its tricky to use gpio on orange pi.
@ChrisRiley
Жыл бұрын
I've never tried the orange pi in the setup, but I have a video next week that runs through the accelerometer setup, not sure if it will help or not.
@FranklynPearson
Жыл бұрын
Very well explained here! I honestly, I don't think "the guy" did a good job explaining it. I couldn't figure out if I was measuring the one with least ringing, or the most.
@ChrisRiley
Жыл бұрын
Thank you!
@tillburn
Жыл бұрын
Thanks for doing this series Chris! ;)
@ChrisRiley
Жыл бұрын
More to come! Thanks for watching
@BeFree0_0
Жыл бұрын
Grate video I can't wait to see what you do for Marlins input shaping. I spent a few days getting the process down to make a little guide for users of Professional firmware for the Ender 3 V2/S1 I have been hoping someone would make a video for it
@ChrisRiley
Жыл бұрын
Thanks!
@markferrick10
Жыл бұрын
Excellent video. Great results. May need to go back to Klipper. Thanks Chris.
@ChrisRiley
Жыл бұрын
Thank you!
@timhoover1416
Жыл бұрын
Awesome video as usual Chris. I watch just about everything you put out and this one is something I need to look into for my Mk3S.
@ChrisRiley
Жыл бұрын
Thanks for watching!
@rodneysmith1750
Жыл бұрын
Impressive changes to the quality of the test print.
@ChrisRiley
Жыл бұрын
🙂👍
@crazytrutas
Жыл бұрын
This is so interesting. Thanks for the upload!
@ChrisRiley
Жыл бұрын
Glad you enjoyed it!
@stevehanwright481
Жыл бұрын
Thanks you do a great job of explaining
@ChrisRiley
Жыл бұрын
Thanks for watching!
@philipschlesinger7595
Жыл бұрын
Have my accelerometer ready - eagerly waiting part 2!
@ChrisRiley
Жыл бұрын
Coming soon!
@frankdearr2772
Жыл бұрын
Great thanks for sharing 👍
@ChrisRiley
Жыл бұрын
Thanks for watching!
@dennisdecoene
Жыл бұрын
Exactly what we need! Thank you!
@ChrisRiley
Жыл бұрын
Glad it was helpful!
@MallocArray
Жыл бұрын
Looking forward to the next part!
@ChrisRiley
Жыл бұрын
Thanks!
@RiderPSV
Жыл бұрын
Спасибо, Крис! Очень интересные видео. Смотрю с удовольствием!
@ChrisRiley
Жыл бұрын
Спасибо, что смотрите наши видео
@sampsaltakis3133
Жыл бұрын
That’s great. Thanks
@ChrisRiley
Жыл бұрын
Thanks for watching!
@sevagj.b
Жыл бұрын
Very interesting
@ChrisRiley
Жыл бұрын
Thank you!
@htw007
Жыл бұрын
Can this be done to Prusa MK3(s+) ? Are you going to make any video for it?
@ChrisRiley
Жыл бұрын
It can be and I could do that.
@htw007
Жыл бұрын
@@ChrisRiley Thank you.
@noanyobiseniss7462
Жыл бұрын
Prusa this and Prusa that, sorry not interested in hearing or using anything geared to one company. Klipper and input shapoer are agnostic so lose the prusa shilling. And if a slicer won't let me push a job through usb why would i want to use it? FYI: I didn't look for this vid, utub pushed it to me.
@ChrisRiley
Жыл бұрын
Thanks, have a nice day!
@brianfield4170
Жыл бұрын
Strangely enough, after I changed my shaper_freq values for x and y, and then restarting, and then sending the set_input_shaper command, the values did not correspond to what I manually set them to in the printer.cfg file. They are both different values, even though when I go back into the printer.cfg file it shows the values that I set. Could it be that by first doing the automatic resonance tuning that it somehow permanently "takes over" the settings? I can see a section above my input_shaper section that shows the following: # [mcu rpi] # serial: /tmp/klipper_host_mcu # [adxl345] # cs_pin: rpi:None # spi_speed: 2000000 # spi_bus: spidev2.0 # [resonance_tester] # accel_chip: adxl345 # accel_per_hz: 70 # probe_points: # 117.5,117.5,10 Does that need to be deleted for my manual values to work?
@ChrisRiley
Жыл бұрын
Check down in the bottom of the file, the settings down there it tells you not to delete act like eprom and save the commands you send. Clean that setting out as well.
Пікірлер: 126