Here is a test 1.75” titanium salute shell I made using rice hulls as a filler/bulking agent to decrease the amount of flash powder needed to make one of these, which saves on costs of chemicals. I also wanted to see if the lower amount of powder used would result in a noticeable change in sound of the salute.
The result was surprising, as it was the loudest salute I’ve ever made like this. The difference being that I normally fill the casing 3/4 full of all flash powder and no filler (About 60grams of flash). Using the rice hill filler allowed me to fill the case of this shell using only 30grams and was much more powerful.
How I make these salutes: (I use TPA flash powder or the typical 70:30 mix). I take a typical consumer Excalibur shell and empty the contents. Using a tablespoon, I add a a scoop of flash then a scoop of hulls or grass seed, another scoop of flash and another scoop of hulls until I get 3/4 of the case filled. Push the top disc you had to remove to empty the contents back in to the casing. Then I fill the remaining space up to the top of the case with hot glue. Let cool then turn upside down and add the lift powder or just leave it in the bottom of the casing where it originally is in consumer shells.
Негізгі бет Ойын-сауық INSANELY LOUD HOMEMADE 1.75” TITANIUM SALUTE CANISTER SHELL
Пікірлер: 143