This is the simplest router table I have ever seen
@edud8452
3 жыл бұрын
So Happy you have a router table now 👍😎
@chrclmnky
3 жыл бұрын
Yes sir more complex designs are now doable. 🌝
@isidorogonzalez7587
6 ай бұрын
Segui tu ejemplo me lleve todo el domingo
@chrclmnky
6 ай бұрын
Good work. Thanks for the feedback.
@MrDoohdaah
2 жыл бұрын
I'm gonna have to have a go at that. I've just bought a Makita 0700cx and this plate will be ace to make it even more useful/easier . thanks for showing this video.
@chrclmnky
2 жыл бұрын
Really bang for the buck and very useful.
@alfonsoaguilar8540
Жыл бұрын
Love the Black doggy
@chrclmnky
Жыл бұрын
Yeah he's so adorable
@pixiedixie
3 жыл бұрын
Хорошая работа!) Приятно смотреть твои видео)
@chrclmnky
3 жыл бұрын
Many thanks for the undying support. 😎🤩
@davidnleeh4
3 жыл бұрын
Nice job!!!👏🏻👏🏻👏🏻👏🏻👍👍👍👍
@chrclmnky
3 жыл бұрын
🍺🥳
@tinasharma620
3 жыл бұрын
Most thank you for most understanding video🙂
@chrclmnky
3 жыл бұрын
Most welcome 😊
@Kai77884
3 жыл бұрын
Hello a great video perfect tool👍👍👍👍from Germany 🇩🇪 👋👋👋Kai🔊🛠
@chrclmnky
3 жыл бұрын
Thanks 👍
@mwas
3 жыл бұрын
Hi there I lv your videos
@rodelginoy6708
3 жыл бұрын
Ganda ng mga bagong power tools sir ah,,, sponsored by makita ,,hehe
@chrclmnky
3 жыл бұрын
Yes sir kelangan mag invest ng matibay at maaasahang mga tools. Sa panaginip ko nalang siguro ma i-sponsoran ng Makita. 😂
@samalons
Жыл бұрын
Many thanks
@douglasgreen437
5 ай бұрын
Great job..
@chrclmnky
5 ай бұрын
Tenx
@eduardm1301
2 жыл бұрын
Simple pero nindot! Nagplan sad ko magbuhat
@chrclmnky
2 жыл бұрын
😎🧨
@gerardogarciagonzalez2001
Жыл бұрын
Buen trabajo, te quedó genial 😲👍🏼👍🏼
@chrclmnky
Жыл бұрын
Thanks
@roger55es
Жыл бұрын
Brilliant vidio Thanks
@chrclmnky
Жыл бұрын
have a nice day and happy building.
@luisaugusto6230
3 жыл бұрын
Muito da hora!
@21thTek
Жыл бұрын
Amazing !!!
@chrclmnky
Жыл бұрын
Thank you Eugenio
@JT-gq1sm
2 жыл бұрын
ayos boss 😊 check out ko na yung plate sa cart ko goods pla yan hehe! more tips and vids 👍
@chrclmnky
2 жыл бұрын
Matsalams po sir
@Ricky4LoverU
2 жыл бұрын
Excellent it looks very good but I wonder what you think of other projects where they install a guide with a hole and behind it they make an outlet to adapt a piece of pipe to be able to connect a vacuum cleaner hose since using the router generates too many wood particles and for safety and the eyes and the nose I see more convenient do than leave it open.
@chrclmnky
2 жыл бұрын
yes i was about to build dust port for vacuum but i got lazy. what i do is just place the vacuum hose near and clamp it so it won't move. does the job well.
@zekevictor
8 ай бұрын
@@chrclmnkyattaboy, functional, simple, fast, no frills. You’ll be at the local watering hole throwing back single malts with the day’s work long finished while the other fellas futz with their featherboards and FUPAs 👍🏻
@chrclmnky
8 ай бұрын
@@zekevictor 😎👍
@isidorogonzalez7587
6 ай бұрын
Lo que me detuvo fuero los tornillos, que no son compatibles hay que comprarlos
@chrclmnky
6 ай бұрын
Any normal countersunk screws or bolts will do on the template.
@isidorogonzalez7587
6 ай бұрын
Buenísimo
@chrclmnky
6 ай бұрын
Gracias
@CamperJohn
Жыл бұрын
Nice set up. where did you get the parallel guide (and is that what it is called)? I've tried searching for one, but can't seem to find one like you use.
@chrclmnky
Жыл бұрын
Thanks. Parallel guide comes from the palm router. I think every routers has accessories like this.
@ankurjain9817
Жыл бұрын
@@chrclmnky agreed
@matthewalbum
2 жыл бұрын
when I cut out the recess with the router, it came out 2 mm too shallow. what is the best way to remove the final amounts. I am worried if I route it again then it will become to deep
@chrclmnky
2 жыл бұрын
I set the depth by using the guide MDF scrap and the aluminum jig on top of each other and set down the straight flush trim bit, as shown at about 1:44
@matthewalbum
2 жыл бұрын
Thanks. This is what I did but somehow it is 2-3mm not enough.
@chrclmnky
2 жыл бұрын
@@matthewalbum did you set the bit and touch its blades on top of the table?
@matthewalbum
2 жыл бұрын
@@chrclmnky I set it to the bottom of my flush bit. I guess the blade is not flush at the bottom. Surprising for a Freud bit. The question is how best to fix this
@chrclmnky
2 жыл бұрын
@@matthewalbum subtract already cut 2mm off the jig height.That is about to going to be tricky. Good luck.
@albertnavarro4914
3 жыл бұрын
Sir ask ko lang kung ano parameter ng 2xl ll new version
@chrclmnky
3 жыл бұрын
Haven't tested a 2XL yet. Will post once I get my hands on one soon.
@deetee-uk
2 жыл бұрын
What nail gun is that?
@chrclmnky
2 жыл бұрын
This - kzitem.info/news/bejne/zaBrx4GBq59leII
@haslimhamzah2782
3 жыл бұрын
👍👍👍
@beyoncefraylevlog9123
3 жыл бұрын
Hello!Morning po watching here tamsak bagong kaibigan Po...
@chrclmnky
3 жыл бұрын
Thanks a bunch. 😎🥰
@kaudioworkz1297
3 жыл бұрын
Sir link naman sa pinag orderan hehe
@chrclmnky
3 жыл бұрын
Virtually available on most online marketplaces.
@Surya-he3uc
3 жыл бұрын
👍👍👍
@chrclmnky
3 жыл бұрын
👍
@bertsbug
2 жыл бұрын
I was getting ideas how to install this.... Thanks for the information.... I was wondering what the notch in plate was for. I thought vacuum 😂.
Пікірлер: 83