the little vanes sling out under centrifugal force and hold against the closest wall when spinning, they are supposed to be loose like that when not spinning
@JeffChittenden
10 жыл бұрын
and it looks like the problem may be that those little flaps that are pushed in when they hit the fluid chamber casing, aren't coming back out. Those are what move the fluid through the pump, and if those flaps aren't extending to the wall of the casing, then the fluid isn't being moved.
@rsauder
5 жыл бұрын
How to do remove the pulley/wheel on this pump? Do you need a pulley-puller???
@emuench155
10 жыл бұрын
Hi Mitch, question for you: I'm putting my 07 Outback PS pump back together. On the big roundish metal ring that surrounds the spinning pump vanes, I know the round metal pin goes on the side with the half-round hole, and matches up to the other half-round hole in the case, and that pin functions as a pivot point. On the opposite side of that is a little channel in the case. My kit provides a little stiff piece and a flexible rubber piece, both of which fit in there. I can't remember if one or both go in there, or in what order (should have taken pictures!). If I put in just the rubber, the round parts swings back and forth really easy. If I put the stiff piece in first and the rubber one facing the round part, it fits snugly, but the big round part moves very stiffly. Can't find a diagram or video with that detail, and no shop I've called actually rebuilds them, they just replace 'em. Do you remember how those go? :-) Many thanks, Eric
@mitchross2852
10 жыл бұрын
not entirely sure, try getting a post out to forums.nasioc.com/ probably under this forum forums.nasioc.com/forums/forumdisplay.php?f=32
@jeffrocha9588
10 жыл бұрын
from a 2.5i'er thanks man!!!
@Raj-cf6fe
7 жыл бұрын
This is called a G ROTOR Type Pump
@keijimuto
10 жыл бұрын
How much did you pay for the new pump?
@mitchross2852
10 жыл бұрын
~140 ish where 40 is a core deposite, so 100$ total. Bought on Amazon
@pirihern9329
6 жыл бұрын
Was the pump a cardone
@JeffChittenden
10 жыл бұрын
"...spins around, or something..."
@jonneal7163
3 жыл бұрын
You could at least disassemble completely and identify the problem. Oh I forgot..you don’t have a clue.
@mitchross2852
3 жыл бұрын
u mad bro????
@THOMASTHESAILOR
7 жыл бұрын
Nice, That's called a "Vane Pump" if you noticed, more than half of the movable vanes are NOT moving, they are stuck in the down position, That's why it stop working for ya..
Пікірлер: 15