I just got my snorkel kit from my local dealer. Everything else I've installed from Can-Am the installation time on the directions was under 2 hours and most took me a couple days just because the directions are poor and you end up getting frustrated. Then you walk away for a while. This says 3 hours install time...I know I'm doomed. Lol. This video will help. Thanks for making this!
@LCPowersports
4 жыл бұрын
It shouldn't take that long if you have everything you need this was probly the fastest one iv done
@BraydonPrice.
4 жыл бұрын
Let me save you some trouble... Run the rest of the vents! Gas tank, front diff... Currently looking for the rest.. had 10 hours on mine and sucked mud and water in the gas...
@LCPowersports
4 жыл бұрын
Man i saw that! We never had that issue but we also didn't go as deep as you haha! Iv been watching your videos lately I'm liking the xmr x3! I just recently got the 2020 rzr highlifter 2 seat. Yall seem to have some pretty sweet parks to mud ride at!
@wearethedupasses2294
2 жыл бұрын
Omg Braydon price brooo
@LCPowersports
2 жыл бұрын
We should do some video with your x3 and my 2022 pro xp it has 4inch portals and 33s or 35s so we are around the same size.
@DirtObseXXion
5 жыл бұрын
WOOHOO! 1K! Congrats fellas! Well deserved!!!!
@LCPowersports
5 жыл бұрын
Thanks man!!!! And thank u for all the shouts along the way! Now we both have to catch up with sxsblog. Only 72k more to go lol
@DirtObseXXion
5 жыл бұрын
@@LCPowersports > sxsblog
@LCPowersports
5 жыл бұрын
@@DirtObseXXion 😂
@rickygreer7288
5 жыл бұрын
Blake Nice job on the install brother something as critical as a snorkel kit oem is the only way to go..
@LCPowersports
5 жыл бұрын
Definitely.. I agree. The fit and finish is very nice and gives me assurance that I wont have any issues. People must remember to not get in a hurry when doing a snorkel kit.
@GBrewner
5 жыл бұрын
I’d go with the XM 310s for sure. I just put a set of 35s on my XMR and they’re incredibly smooth!
@LCPowersports
5 жыл бұрын
I do really want to try them!. Have u got to run them in any samd on a creek or river? Wondering if they dig more than paddle
@GBrewner
5 жыл бұрын
LC Powersports I havent got to try them in any mud yet. Just on some dirt, and gravel roads. I did get in some sand and they seemed to do great. They dug a little, but pushed through just fine.
@LCPowersports
5 жыл бұрын
@@GBrewner I know the XT300S surprised us in muddy conditions for the lugs to only be 3/4" .. I know the XM310s look great
@GBrewner
5 жыл бұрын
@@LCPowersports I'd imagine the XM 310s would build on the performance of the XT's performance. Since they're essentially the same pattern.
@jerryjones7114
4 жыл бұрын
Great video, I am installing this kit today.
@LCPowersports
4 жыл бұрын
Awesome it wasn't to bad of a job.
@BeckrestDesign
Жыл бұрын
Hi, great video. What intake or exhaust hooks up to the P-trap? Also the grills that go into the snorkels, do they just push in and can they just be pulled out, or are there clips or screws? Thanks again for the video!
@LCPowersports
Жыл бұрын
I'm not sure on the p trap. And I believe the grills are held in by clips if I remember correctly! Thanks!
@victorsaldivar4697
7 ай бұрын
Great video buddy!
@johnnyfudge8783
3 жыл бұрын
Hey man great video...do you know the name or part number to the last part you installed that clamped in front of the snorkels..thanks
@LCPowersports
3 жыл бұрын
I have no idea! I will try to look it up and see though!
@johnnyfudge8783
3 жыл бұрын
@@LCPowersports ok thanks really appreciate 👍🏽
@nathanhoatland8084
Жыл бұрын
Did you have issues installing the riser from the air box, mine seems to small to fit
@xxmagnum
3 жыл бұрын
could you still put a rear window in with the snorkel kit installed ?
@LCPowersports
3 жыл бұрын
Im not sure we never tried.
@chrismoussette1348
Жыл бұрын
No, they don't make a rear window that fits with the snorkel kit. You would have to cut out around it.
@terrymcguire2710
5 ай бұрын
Yes you can I have one installed on my '23 xmr
@alexisherrera5967
3 жыл бұрын
I have a question having that hole in the center part you ínstales would that be the max level to go under water?
@Sac_Jeep
5 жыл бұрын
Did it come with the interior block off for the old intake to help cut down on cab noise?
@LCPowersports
5 жыл бұрын
Stephen with the XMR kit, the risers eliminate the need for the interior block off mod due to the fact that the riser are ran up past the old intake area and all of that is replaced and the openings of the risers are up high and face the back for the machine. It does help with the noise
@Sac_Jeep
5 жыл бұрын
LC Powersports Awesome, Thanks!
@trevorbraden5448
3 жыл бұрын
@@LCPowersports that is the exact reason I wanted to put snorkels on mine
@kreimer211
4 жыл бұрын
Quick question, on the back of the risers...were the mounting holes threaded? Also, how did you clamp the side exhaust riser to the role bar?
@LCPowersports
4 жыл бұрын
Let me get back with you on that one I wasn't there for the whole install.
@Baylee191
3 жыл бұрын
How does it get air if you seal the air box off around the nine minute mark?
@dellparker7686
4 жыл бұрын
Does the snorkel kit reduce that harsh engine / clutch noise from the cab?
@LCPowersports
4 жыл бұрын
Not much
@jericmccoy6707
4 жыл бұрын
I have a 2019 Can Am Defender X MR with the snorkel kit already installed. The problem is it right where you look out the rear view mirror. Thoughts on fixing this? Can you take the right snorkel and put it on the left side and the left side snorkel on the right to create a gap to view behind the machine?
@LCPowersports
4 жыл бұрын
We installed a reverse cam and had it run full time
@LCPowersports
4 жыл бұрын
You could try I'm sure you would had to modify it some though.
@jericmccoy6707
4 жыл бұрын
@@LCPowersports thank you!!
@LCPowersports
4 жыл бұрын
No problem man
@eldelapalma1338
2 жыл бұрын
I need part number to the cover installed on minute mark 18:30
@LCPowersports
2 жыл бұрын
I have no way to get it im sorry
@austinwalker6448
3 жыл бұрын
How much you charge to do a snorkel job on my x3?
@LCPowersports
3 жыл бұрын
We don't work on anything but our own stuff
@DirtObseXXion
5 жыл бұрын
I'd ask why you didn't just get the XMR but I already know y'all are the types of dudes who can't wait to tear stuff apart!!! Hahaha! Knocking on 1000 brother! Congratulations!
@LCPowersports
5 жыл бұрын
Thanks bro and I did explain in the video why I got the xds instead of the xmr but the video was so long I ended up editing that part out. Lol But long story short, when I went to buy a turbo sxs that day, there was no XMRs there that day, and they had this XDS marked down 5k off msrp.. So I couldn't pass that up.
@LCPowersports
5 жыл бұрын
I do wish I had the Smart-Lok that comes on the XMRs.. Well now they include them on the 2019 model xds.. Mine was a left over from 2018.
@havvicks1
5 жыл бұрын
@@LCPowersports You can purchase the SMart Lok from Can Am and install it yourself. IT's not much more than a Halo locker, and is supported by BRP. I am goign to be purchasing mine soon.
@LCPowersports
5 жыл бұрын
@@havvicks1 thanks Tiffany, it will definitely be on my list for future upgrade!
@chrismoussette1348
Жыл бұрын
All your vent tubes front and rear diff gas tank transmission. Should all be ran as high as your snorkel
@dellparker7686
4 жыл бұрын
Does the kit reduced the cab noise significantly?
@LCPowersports
4 жыл бұрын
Not much difference that I noticed.
@amsstudent8932
5 жыл бұрын
when you buy an x3 thats not an xmr and you bought the snorkel kit do they install it for u?
thank you and i don't mean to be a pest. but can i get the link for the lower doors to. i am getting 19xds turbo r. i all so noticed that a lot of places sell a front frame and suspension stiffener. do you think it's worth the $500- $800 for this ??? i will be trail riding 75 to 80%of the time
@LCPowersports
5 жыл бұрын
@@p-nutbutter4056 Replacement Lower Door Panels Inserts for Can Am Maverick X3, Black (Left & Right) www.amazon.com/dp/B075Y1SZCH/ref=cm_sw_r_cp_apa_i_3XueDbQ4YRPK2
@LCPowersports
5 жыл бұрын
If your not gonna be jumping it big and hitting ruts and whoops at 70mph.. then the stock shock supports stiffening bracket should be sufficient. I have had zero issues and I mainly trail ride and there is nowhere around her to full send her in the air unless we get a bulldozer and make something lol
@richfarfugnuven6308
5 жыл бұрын
Debating doing this on my 2020 XRC...
@briansmith2984
5 жыл бұрын
Canam doesn’t include instructions because they have a website with all the instructions. Just type in the part number of the kit you have. instructions.brp.com/e-instruction.html#tab=1
@brandonjordan6366
5 жыл бұрын
The snorkel jobs are always fun......... Not really
@westvirginialife6901
2 жыл бұрын
Y’all skipped some really main key points
@LCPowersports
2 жыл бұрын
I apologize I wasn't there that day for that video
Пікірлер: 69