Very very helpful on the spot today as the sun was setting after fitting a new booster to an EL. You saved the day. Subscribed. Identical to EL by the way.
@TEKNOFIED
Жыл бұрын
Awesome, thank you!
@peterwynn2169
2 жыл бұрын
AU Falcons are damn good motor cars.
@TEKNOFIED
2 жыл бұрын
100%. I have owned mine for 20 years now.
@pyrace
4 ай бұрын
You're a bloody legend. Cheers, Mate 👍
@andrewg2618
Жыл бұрын
Thanks Mate. Just replaced my EF XR8's switch thanks to you. Yours was the best video that explained the whole tricky sleeve thingy. I
@TEKNOFIED
Жыл бұрын
That's awesome, Glad it helped.
@markbehr88
5 ай бұрын
Thanks. I used your video to help.
@jordanebert2093
2 жыл бұрын
Thanks mate, mine wasn't the switch it just needed ignition turned on lol Appreciate ya video 👍🏽
@TEKNOFIED
2 жыл бұрын
I did the same thing at a rego check when asked to press the peddle :)
@pavman21
Жыл бұрын
Thanks mate it worked a treat 🙏 great tutorial video ☺️
@wazza33racer
10 ай бұрын
Mine just started playing up.........thanks for the tips.
@TEKNOFIED
10 ай бұрын
Your welcome. I hope it helps you out. Cheers.
@johnussss
Ай бұрын
Brilliant, thank you!
@TEKNOFIED
Ай бұрын
Glad it was helpful!
@trevorcahill6157
Жыл бұрын
I had this problem on my 1999 au Fairmont no brake lights I took the switch out did a continuity test it came up that it was working even though I have no brake lights so I hooked it backup putting a toothpick in it to simulate it was turned on But still no brake lights even though the continuity test showed it working so I then cleaned up the external power connections on the switch with a file and WD40 hooked it all back up again and it is working fine. Hope this may help as well. Grate video TEKNOFIED.
@TEKNOFIED
Жыл бұрын
Thank you. I pulled apart and cleaned the old one before replacing. everything worked but not for long, about 1 month or so. So I replaced it. Good idea to make sure all contacts are good.
@jasongregory386
2 жыл бұрын
Top video,thanks mate
@TEKNOFIED
2 жыл бұрын
No problem 👍
@mrmstahh467
2 жыл бұрын
So I did exactly the same as what you did but it's not working unless I push brakes hard to the floor for the brake lights too work
@TEKNOFIED
2 жыл бұрын
It will not make any difference to how hard you push the peddle. the switch will turn on the brake lights when the peddle is slightly pressed and no longer touching the switch. You might have a slow relay that needs replacing.
@johnussss
Ай бұрын
there's a spacer against the pedal and a small black "sleeve" ... am missing the smaller component (what you called a sleeve) do you know where to buy one? ... could get one from the local wrecker, but would need to drive there without it, would that damage the switch? ... not sure if it was missing before needing to do some work on the firewall , had to drop the pedals to do that work. thanks
@TEKNOFIED
Ай бұрын
That part only tightens things up so you don't hear any rattle sounds or maybe a click each time you break. It wouldn't damage the switch driving without it. If you don't use one you might forget about it and wonder one day why there's a rattle sound when driving. Better to get one. I don't know it's correct name or part number. Best bet would be to call Ford or as you said get one from the wreckers. Cheers
@johnussss
Ай бұрын
@@TEKNOFIED Thanks for that, have a Manual cab chassis and the firewall cracked and collapsed around the where the clutch cable passed through the firewall, never thought I'd fix it myself nd I live out in the sticks, there's a tube that passed through on an angle that the cable sat in, but managed to created something out of a bunch of stuff that looks like a permanent fix, thanks for the info and video!
@jordanbarratt2889
2 жыл бұрын
Mines so touchy tho like it works sometimes but when I took the switch off it all flew off so I don’t know what washers go where
@TEKNOFIED
2 жыл бұрын
I paid $22 for mine on eBay. I had to wait 1 week for post but for $22 it's worth just replacing.
@EndruoPros
Жыл бұрын
how did you clean the switch its self? I cant figure out out to pull it apart.
@TEKNOFIED
Жыл бұрын
I did open and clean the switch the first time but cleaning it only last about 2 or 3 months. Its a very simple switch. There is 2 bits of the switch you need to bend straight so you can open it up. the spring will pop the black plastic part so you need to be careful not to lose the plastic part or spring as you open it. After you have it apart you will understand how it works.
@couttsy222
2 жыл бұрын
Ummm........it's a "pedal". Not to sure what a "peddle" is.
@TEKNOFIED
2 жыл бұрын
Cheers
@13yearsaprepperr.jtilbury.51
Жыл бұрын
stick your head under the dash of a ford for 1/2 hour ,,, it makes everyone talk weird ! Rob NSW
@Emily-md2jp
Жыл бұрын
Always one A hole who picks on someone’s pronunciation
Пікірлер: 32