Dependencies for Resolve: sudo dnf install alsa-plugins-pulseaudio libxcrypt-compat xcb-util-renderutil xcb-util-wm pulseaudio-libs xcb-util xcb-util-image xcb-util-keysyms libxkbcommon-x11 libXrandr libXtst mesa-libGLU mtdev libSM libXcursor libXi libXinerama libxkbcommon libglvnd-egl libglvnd-glx libglvnd-opengl libICE librsvg2 libSM libX11 libXcursor libXext libXfixes libXi libXinerama libxkbcommon libxkbcommon-x11 libXrandr libXrender libXtst libXxf86vm mesa-libGLU mtdev pulseaudio-libs xcb-util alsa-lib apr apr-util fontconfig freetype libglvnd fuse-libs AMD GPU: sudo dnf install rocm-openCL NVIDIA GPU (with RPM Fusion): sudo dnf install akmod-nvidia xorg-x11-drv-nvidia-cuda *Note: Make also sure that your user is part of the group "render" on your host! (usermod -aG render {your username})
@Contmotore
10 ай бұрын
Omg, it's finally running! Resolve only gave me one pop-up error "unable to load plugin: USD.plugin libXt.so.6: cannot open shared object file: No such file or directory", so I had to install libXt as well. Wish me good luck, time to try out! 🤞
@shadowseek27
8 ай бұрын
what do you mean by "*Note: Make also sure that your user is part of the group "render" on your host!" ?
@danonino2003
7 ай бұрын
Can you do a guide for SteamOs from scratch?
@flamingscar5263
7 ай бұрын
@@danonino2003 the great thing about Distrobox is that the setup is the same on every distro, although SteamOS is a bit of a different distro so getting distrobox running on SteamOS may end up the harder part, but once Distrobox is installed the rest would be the exact same
@JuanPerez-lg8yl
7 ай бұрын
@@flamingscar5263 I Installed fedora 39 on my Steam Deck, was a s***, so I installed fedora 38 and after I installed all the libraries and after that resolve works with images and sounds but no with videos 🥲 so I installed all the video codes and still nothing...🙃
@koromau3854
Жыл бұрын
I appreciate you always keeping it real man, no clickbait or linux fanboyish just honest feedback and solutions!
@MichaelNROH
Жыл бұрын
Sorry for the audio quality in today's video. I tried my best to get rid of the echo, caused by the new mic, but I couldn't do more sadly 😔
@DullJoker
Жыл бұрын
Hey man, no probs🤙
@shock59
Жыл бұрын
It is not really that bad, however adding background music could possibly make it less noticeable.
@ReligionAndMaterialismDebunked
Жыл бұрын
:3 Awesome! I've wanted to use DaVinci since I've wanted to get into editing videos for personal and to make money, and I'm part Italian/Greek (also, Da Vinci was vegetarian, and I'm vegan, so that's cool), but I've heard it barely works. This video was in my feed. DaVinci looks so much better than Shotcut, and Kdenlive, though I've used them a bit with not much complaint (picking what to edit isn't so easy, and effects aren't so easy to figure out).
@RandomFandomOfficial
Жыл бұрын
Does it support H.264? Will it run well on older/lower end hardware (I7 7700HQ, GTX 1050, 16GB RAM)?
@friedrichhayek4862
Жыл бұрын
This is funny, because the installer is an appimage
@Siltprogramation
Жыл бұрын
Great video! This is a good solution, however, a better one would have been for the developpers to pack the application in a flatpack, app image or snap.
@MichaelNROH
Жыл бұрын
Indeed
@maviniii
Жыл бұрын
I totally agree!
@friedrichhayek4862
Жыл бұрын
Never snap
@no_name4796
Жыл бұрын
Or put the damn dependecies by default
@adam91303
Жыл бұрын
Maybe it's worth writing to the blackmagic developers? :)
@SunCrushr
Жыл бұрын
FYI, if you get a fuse error when running the installer, you need to install fuse, not just fuse-libs.
@jaizon
10 ай бұрын
Thank you!!!!!1
@Contmotore
10 ай бұрын
Thanks Sir
@gmt1
Жыл бұрын
This is really cool, but they really should just provide Davinci Resolve as a Flatpak or Snap package.
@MichaelNROH
Жыл бұрын
100% they should. Even if they are just focused on enterprises, they already have to support three operating systems. While they are similar, they are not identical, so flatpak would even lessen the workload for them.
@MrGamelover23
3 ай бұрын
@@MichaelNROHWell, it seems that right now, they literally only support one distro: Rocky Linux.
@MastermindAtWork
Жыл бұрын
Wait minute, now thinking about it, this method might not just work for Davinci Resolve but for Autodesk Maya as well since that software is primarily supported on RHEL and CentOS.
@MichaelNROH
Жыл бұрын
It can, if you can figure out the dependencies. For resolve it was quite easy since the installer tells you what you need if no optional version is installed.
@dewanata_armoon
10 ай бұрын
@@MichaelNROH hello mister what the equivalent for orcm-opencl for intel UHD grapich? does davinci resolve works with intel gen10 mobile?
@MrGamelover23
3 ай бұрын
@@dewanata_armoonIt won't officially support integrated graphics on Linux, but it will on Windows. There are ways to work around it for amd, idk about intel.
@halopghoul2751
3 ай бұрын
@@MrGamelover23 and how to launch with the vega 8 built-in? are there solutions for linux?
@pensive_
8 ай бұрын
Been trying for 4 years to get it going on MX as I dont want a separate server running Redhat just for Davinci. I cannot thank you enough for this solution. I can now eliminate an entire dedicated server and run Davinci on the server it is supposed to. Excellent.
@pensive_
8 ай бұрын
The advice sure is the right way to go thank you. I managed to get as far as installing Davinci, but it chokes. Its for reasons, not to do with your advice. It is QT and Python again at work here. If I can get Davinci to start up, this will be great. Your advice at least helped me to get this far. However, using the exact steps you did with the exact Fedora etc, Davinci wont run because of the following error. " This application failed to start because it could not find or load the Qt platform plugin "xcb". Available platform plugins are: linuxfb, minimal, offscreen, xcb. " Strange that I got to this unresolvable Python/QT nonsense following the same advice. Wherever Python and or QT goes, goes trouble - guaranteed. They are half baked languages.
@FengLengshun
Жыл бұрын
I love how everyone is now loving Containers. Please also try out Conty (basically distrobox as a single binary), Junest (Arch Distrobox but proot/chroot based instead of container based), and runimage (similar to Conty but focused on overlayfs). They're all pretty great.
You saved me hours and hours of headaches of keeping Resolve running on a rolling release distro. Thank you!!!!
@matthiasbendewald1803
Жыл бұрын
Awesome, thank you for the detailed and good explanation. You or someone else could also setup the container and put it on a container registry, that way it would make it even easier for everyone else and future you to get it running. Maybe leave away the program itself... Or put together a docker file so that it is easier for everyone, too.
@raygan
9 ай бұрын
Hell yeah, I was banging my head against the wall trying to install Resolve on Fedora 39 until I found this video. Thanks!
@wurstgriller
3 ай бұрын
hi, after doing everything exactly like in this video, i still got the error "unsupported gpu processing mode" within davinci. so i searched with dnf like this: "dnf search opencl" - it found a package named "mesa-libOpenCL" and i installed it (i'm on a radeon rx 7800 xt-gpu) like this: "sudo dnf install mesa-libOpenCL" and voila: Resolve opened and worked for me! Very great tut @Michael
@wurstgriller
3 ай бұрын
Edit: now i got a problem within resolve: i can import via -> media -> file, but cant play the video nor creating any timeline which works. i also tried to convert the video-file to .mov-format but that also not works. HELP!!
@JumperTheHero
2 ай бұрын
@@wurstgriller This is what I am getting too. I haven't been able to fix it yet. It apparently has to do with the AMD drivers not being supported for Davinci Resolve.
@SunCrushr
Жыл бұрын
You, sir are a legend. I can now run Resolve on whatever distro I want. This is awesome.
@RubyRoks
10 ай бұрын
Glad i came across this. I'm getting closer and closer to tossing Windows and a number of other programs in the trash and wanted to make sure some of my more necessary applications will play ball.
@MichaelNROH
10 ай бұрын
@Combo_Food
8 ай бұрын
So I’m kinda new to using Linux, I’m really stuck on the part where you put the distribution around 5:20. It ask me if. I want to pull the image, when putting y I get an error and when putting n it makes me put another command that also doesn’t work. Just really confused and in dire need of help
@Beryesa.
Жыл бұрын
Once rusticl becomes stable and saves us from proprietary amd opencl, flatpak gets better GPGPU support and flathub sorts out the payments, imagine a single click from gnome software/plasma discover and voilà! Until that day, thanks :D Though, fedora 37 support will and with fedora 39 release so... Something more LTS (redhat/centos/rocky) could be better maybe.
@grilo4691
2 ай бұрын
YO DUDE, THANKS A LOT! I TRIED SO MAMY TIMES TO DOWNLOAD RESOLVE AND NO ONE WORRKED, BUT YOUR VIDEO SAVDE ME, THANKS A LOT!!!!!
@dexgaming6394
Жыл бұрын
Congrats, 10k subs!
@MichaelNROH
Жыл бұрын
Thanks 😉 Psst, there is a reason why I haven't acknowledged it yet 🤫
@BLC2022
Ай бұрын
Help! im in the installation wizard and it says: Error getting authority: Error initializing authority: Could not connect: No such file or directory , and in the terminal: _IceTransSocketUNIXConnect: Cannot connect to non-local host brawllaunchchannel _IceTransSocketUNIXConnect: Cannot connect to non-local host brawllaunchchannel Qt: Session management error: Could not open network socket QWizard::setField: No such field 'options.uninstall' QWizard::field: No such field 'options.uninstall'
@pantarei.
3 ай бұрын
Why it is so complicated? There is no way that a regular Windows user would accept something like that. More - DaVinci for linux does not support MP4 and AAC format. Why nobody mention that?
@AndRei-yc3ti
17 күн бұрын
Because you should blame the dev for making it this way. And AAC and MP4 works on the paid version.
@Noel_FGC
10 ай бұрын
this looked like it was working (im on an nvidia gpu) and i loaded into the project manager, but after closing it and reopening it through the shortcut it doesn't appear to work, and launching it manually through the terminal says unsupported gpu processing mode (i checked, nothing has been uninstalled)
@gungun974
Жыл бұрын
I always failed to do that on every distro I haved. THANKS YOU SO MUCH FOR THIS TUTORIAL ❤
@MichaelNROH
Жыл бұрын
Happy to help
@VinylRescue
7 ай бұрын
With a bit of beating about the head and shoulders I got Resolve running great on Zorin 17! I do have to use Shutter Encoder to convert MP4 to MOV and then back to MP4 before uploading my 4K video to KZitem.
@somethingbigger001
Жыл бұрын
Never had problems on linux mint. Install and done.
@segvet9729
Жыл бұрын
good for you
@bobd2028
Жыл бұрын
Advantage of Just Works distro.
@--Morpheus--
9 ай бұрын
Thanks, trying it out today!
@demanuDJ
Жыл бұрын
I'm not using DaVincii Resolve but it helped me with installing other propietary software which works with specific libs from ubuntu 18.04
@fabienmargerie6815
Жыл бұрын
Well done and thanks Michael for your super work, see you soon! 👍😎👋
@zetetic-astronomer
Жыл бұрын
For arch based distros (including SteamOS 3) you need to run: xhost +si:localuser:$USER
@ahmseb
2 ай бұрын
Thanks for your video it helps me install peace of software on Fedora that I've been trying to install for ages and now with your help I've installed it with ease👍
@linoxyard
Жыл бұрын
There's also a project called flatpak-resolve, which packages Resolve into a flatpak. That's the way I've been using it for a while
@youtube.user.1234
Жыл бұрын
Does it work properly as a flatpak?
@linoxyard
Жыл бұрын
@@youtube.user.1234 The main program does, with an nvidia card and proprietary drivers (you need flatpak nvidia drivers installed of course). The other apps, like Raw benchmark don't work, and I hear there are issues with AMD rocm opencl drivers (probably the cause is no flatpak'd rocm)
@pickledoreos
10 ай бұрын
it seems to have installed fine but there's no icon and when it launches I get the error "Unable to load plugin: USD.plugin". The timeline is also invisible for some reason...
@trapexit
Жыл бұрын
Containers aren't really a specific thing. It is a name for the set of features Linux has to isolate resources or create namespaces of resource for a process. "Containers can run on your PC like any other program." .... that's because they are just a program.
@DominikLuebben
8 ай бұрын
Resolve flawlessly installs and runs with my AMD 7900xt with the Fedora 37 container, however, the timeline and controls aren't displayed correctly. I setup distrobox on Fedora 39 with curl and podman, because it wasn't possible to use the available package. Do you know how I can fix that? Might it be a podman issue and I should try docker?
@TheRatRDR
7 ай бұрын
I get "error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory" when i try to run it
@PixelSheep
5 ай бұрын
same - does anyone have some ideas on what to do?
@PixelSheep
5 ай бұрын
this solved it for me "sudo dnf install ocl-icd" - hope this helps! :)
@shankar66
3 ай бұрын
bro i am trying this for 2 days please help me. i have ubuntu. i installed distrobox and set everything as you told. but when i was installing nvidia drivers it gave error it was saying 185mb more diskspace required. by the way more than 25 gb was free in the disk.
@leeuca
2 ай бұрын
The thing is, that you dont need to install the drivers at all. I was tinkering with this a lot. It seems that you just need to make sure, that the host has the most recent drivers + cuda installed. Then go into the container and use sudo dnf install ocl-icd-devel and in my case this fixed the issue! I'm running this on Ubuntu 24
@tankfire20
Ай бұрын
I am trying to use Davinci resolve but I just found out it does not work on my distribution. Why do I have to make a virtual machine of a different linux distro just to make this program work It's all Linux right? Why is there no compatibility, always missing dependencies, and random bugs that require me to be super wizard log file reader to figure out.
@HubDubs
Ай бұрын
So I've managed to get Resolve up and running, I can preview and add clips and it detects my GPU (AMD). But the timeline UI is completely blank, everything else works except the timeline. I've tried both the stable Resolve 18 and beta 19 with the same issue. Using Plasma 6 on Fedora 40. Any ideas? Thanks.
@nikospace4355
2 ай бұрын
Hey, so I have everything installed, but im getting an error saying that it couldn't initialize OpenGL, despite me having the Nvidia drivers installed. Do you have any fix for this?
@SportezMemes
Ай бұрын
i did that but it doesnt open , it looks like it has opend on the dash but there is no display or anything and then it closes
@chrisp267
22 күн бұрын
Hey Michael, vielen Dank für deine tollen Videos! Eine Frage: Ich habe alles genauso gemacht, wie im Video beschrieben, beim Start von resolve erscheint jedoch das Fenster, welches besagt: "Unsupported GPU Processing Mode". Ich kann auch meine GPU nicht auswählen, sie wird nicht angezeigt. Ich habe eine Radeon RX 7900XTX. Hast du eine Idee? Danke!
@creatfunandunique
3 ай бұрын
hi I have tried Av1 but I found out that quality was reduced are there any other codec or something so the quality doesn't decrease too large and size doesnt also become big I have also tried codec like h264 but the file is not opened by davinci ........ My problem is Most of the time i got mp4 files and have to convert to mov using xdcam hd 422 which make file 5-6 times larger as compared to mp4 file and it makes my davinci slow So are there any other method so size doesnt increase too much and quality doesn't decrease
@sNiksnakYT
8 ай бұрын
hey i installed all dependencies but after launching DVR the timelines do not load. i cant import clips or anything
@sg96951
7 ай бұрын
Followed your tutorial but still failed to install (on latest linux mint) I got following error: uthorization required, but no authorization protocol specified qt.qpa.xcb: could not connect to display :0 qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found. This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem. Available platform plugins are: linuxfb, minimal, offscreen, xcb.
@MichaelNROH
7 ай бұрын
Please check if you have actually done all the steps mentioned in the pinned comment. This is usually an NVIDIA error
@garretthuffman2412
2 ай бұрын
@@MichaelNROHhaving this issue but I'm not using Nvidia. I'm using the opencl drivers. Any help to point me in the right direction would be great!
@douglasbuchanan2973
Жыл бұрын
PEOPLE WANT THINGS THAT WORK and LAST A LONG TIME!!!!!Thanks for the INFO
@user-ls1pq3oj8r
Ай бұрын
I did everything according to your instructions and some additional reading and removing old libraries and Davinci finally starts but when I go to Memory and GPU section in preferences there is no opencl option available. I'm out of solutions at the moment so any help will be much appreciated. P.S. The version I have is DR 19 public beta and my gfx card is ASUS Radeon RX580 8gb. I've installed rocm-opencl as well.
@ProgrammerInProgress
3 ай бұрын
Thanks for the video. This got me 95% of the way, but I just couldn't get Resolve to properly recognize my NVidia GPU (could be the drivers I'm using on Linux Mint on my host machine lagging behind, I can get all the way up to loading Resolve, but it then shouts at me about my GPU settings and i'm given the option to change settings that does nothing) I still think I can figure out what's wrong here, so this still helped massively with that.
@ProgrammerInProgress
3 ай бұрын
Should add some more notes. If you're running an nvidia GPU, when you create the distrobox, add --nvidia at the end of the command, that will solve many of your problems.
@ProgrammerInProgress
3 ай бұрын
I got it all working in the end :D
@ginjalkesayangan
2 ай бұрын
help! in my setup it says DaVinci Resolve could not initialize OpenGL. i'm using nvidia GPU and done the 'sudo dnf install akmod-nvidia xorg-x11-drv-nvidia-cuda'
@MichaelNROH
2 ай бұрын
The driver versions between distrobox and the host need to match it seems. You can download the drivers from the website and use them in distrobox
@Zadian.
3 ай бұрын
I followed all the instructions, but I wasnt able to see my timeline at all, it was just a blank panel. Any ideas?
@creatfunandunique
4 ай бұрын
help ! I wanted to add komaika axis font from da fonts , installed otf , ttf files installed both of them it appears fine in kdenlive software but davinci resolve doesnt shows the font i downloaded , and i have tried other 2-3 fonts like chicago and other fonts as well and it appears in kdenlive but not in davinci *****why or davinci doesnt support downloaded fonts ???
@MichaelNROH
4 ай бұрын
Resolve's individual "programs" are being built differently. The Editing mode usually reads both user and system fonts, while Fusion only reads system fonts by default. I talked about this at the end of this video: m.kzitem.info/news/bejne/uoOq0IaeaqiWknY
@jmalmsten
Жыл бұрын
This does seem promising. But as a Linux Noob. Resolve compability has been the thing that is keeping me on Windows. Because... Just looking at the hoops required for linux users to do most things. I am more than a little intimidated. So many things make me ask... Why is this the users task to solve? If Linux truly wants to be the ruling OS of the masses. There really needs to be an overhaul of basics. Reinstalling the same app over and over to weed out the dependencies (whatever that means)??? Should there not be an option in the myriad of terminal commands to install the necessary bits and bobs automagically. And should that not be the default option in the first place? A "this will run the app on most systems and you can opt to do things manually if you want or if the defaults don't work as expected"? Sorry it became an unintelligible rant. But still. I am very much confused about why this is the end users problem.
@MichaelNROH
Жыл бұрын
DaVinci Resolve has the unintended disadvantage that it was never meant for regular Desktop users but only for professional use cases like movie production. The Windows version is the only one which can be used quite effortlessly. The free version on both MacOS and Linux are not as functional and are meant to be only deployed on tested operating System (CentOS, RockyOS, Rhel)
@AlucardaPapere
11 ай бұрын
Keep in mind, this is an issue mostlry relegated to creators type software, where most of them are not even available on linux
@red_geist9741
2 ай бұрын
I just wish BlackMagic would do better at supporting Linux. This is pretty ridiculous to still be this much of a pain in 2024.
@MichaelNROH
2 ай бұрын
We need a lot more people in the industry that use more modern Operating Systems for this to happen it seems. The one's that use the Linux version in production (and I mean big ones) just use the old Rocky Linux one, it's really only suitable for this one use case.
@AwesomeBlackDude
Ай бұрын
@@MichaelNROH Do you mean download the ver 9.4 Desktop/Workstation Live Images ?
@Nullifer
Жыл бұрын
I've finished and the app opens, however I get unsupported GPU processing mode. I'm on NVIDIA, can't seem to get Nvidia drivers inside the distrobox
@zhanko73
Жыл бұрын
You should use the --nvidia parameter, however regardless the nvidia-smi see the video card, DRS still show unsupported GPU processing mode. Here is the command that I used which was a step closer to the solution: distrobox-create --nvidia --name Resolve-Fedora-37 --image fedora:37
@NotGabe001
Жыл бұрын
I really hope one day they make an open source version of Resolve. Then maybe we won't have to deal with this and just install it from the repo. I know it won't happen, but I can dream.
@MichaelNROH
Жыл бұрын
It wouldn't even need to be open source. Flatpaks and non-free software are already part of the Linux ecosystem
@proctoscopefilms
Жыл бұрын
Olive video editor is supposed to be that. It's very ambitious, but it's stalled already.
@JahidulIslam
Жыл бұрын
You can build flatpak yourself.
@RobotoSkunk
2 ай бұрын
For some reason, distrobox didn't work for me, but uninstalling mesa-libOpenCL and installing rocm-opencl in Fedora 40 worked without needing to do anything else to fix OpenCL problem. To install it, I had to remove some broken DaVinci Resolve libraries and ignore libraries check
@kimmysander2447
15 күн бұрын
To anyone running this on a laptop getting the error GPU memory full, while having literally nothing in your timeline, go back to your bios, and disable hybrid mode so Only your dedicated GPU is active - yes your pc will eat more power, but davinci will work!
@GreenScreenExplorer
Жыл бұрын
This is awesome, Thank you for sharing
@dy2c
Ай бұрын
thank you so much man!
@clocked0
Жыл бұрын
I am honestly amazed at how far this concept and implementation has evolved since Bedrock Linux
@monochrome_linux
Жыл бұрын
exactly. Bedrock was such a novelty, but now everyone can get the same feature. No one seems to use or make content of Bedrock any more i think, havent seen one in quite a while
@clocked0
Жыл бұрын
@@monochrome_linux In fairness it also hasn't had a new release in quite a while. 0.7 Poki has been out for a couple years now
@mamaelas
8 ай бұрын
I got stuck before any chance of getting it installed. I got distrobox with podman though Pamac in Manjaro, then followed the steps to allow podman to work rootless and then proceeded to install Davinci in the container. But I can´t get into the installation because it says that ¨It can´t be executed. File does not exist¨, like bash can´t found it, even if the .run file is recognized in the folder when I use de ls command and also I use ./ as it recommended in the video. As well I did the chmod +x procedure. May you know what is the problem? Anything seems to work
@Totallynotmwa
Ай бұрын
Installing rocky linux inside of distrobox helped but i cannot get the nvidia drivers/its hard (Had to install with --nvidia and ocl-icd)
@creatfunandunique
4 ай бұрын
hello there PLEASE HELP , in my friends computer having windows .mp4 file runs easily(we can edit videos with .mp4 there) but in my linux it doesnt runs when i import .mp4 file it is black only, neither video nor sound comes i always have to convert to .mov then it works fine . ****does .mp4 file run in linux davinci or not ??? if yes , please mention the solution. I USE UBUNTU (64-BIT) .
@MichaelNROH
4 ай бұрын
MP4 as in the format is not the problem. The free version of DaVinci Resolve on Linux does not support H.264 (AVC) or H.265 (HEVC). That only works in the Studio Edition due to licensing costs, which are usually covered by the Operating Systems. The newer AV1 codec works flawless, and if that is not an option, I would recommend recording with a different video codec
@grilo4691
2 ай бұрын
My fedora just updated one day after installing and now my resolve just crashed... Everytime i try to open says he cant find opt/resolve directory but i didn't deleted these directorys... anyone can help me with that?
@MichaelNROH
2 ай бұрын
The link is stupid sometimes. Just create the /opt/resolve directory on the host, and leave it empty
@pineofwired
Ай бұрын
hey! thank you so much for this tutorial, i followed it and davinci resolve now works! however.. when i try to ''distrobox-export --app /opt/resolve/bin/resolve'' it says ''Application /opt/resolve/bin/resolve successfully exported.'' but clicking that app that just formed seems to load for a bit and then nothing appears. launching through terminal works again though. any thoughts?
@MichaelNROH
Ай бұрын
I've had two things happen in the past. 1. The link did not reference distrobox whatsoever (check exec=... in the resolve link in ~/.local/applications/) and I needed to export it again. 2. For some reason, the link expects the /opt/resolve directory on the host, so just create it with sudo and leave it empty. Usually this happens automatically, but not always
@dummag4126
2 ай бұрын
Are you shure there isn't difference in prestazioni respect an installation directly on rockylinux without container?
@ProgrammerInProgress
3 ай бұрын
Is there any way to get the speed editor to work for resolve within the distrobox? When I initially tried to install resolve on my OS without distrobox, resolve could see the speed editor.
@iguanaman08
3 ай бұрын
Managed to get it installed on Linux Mint after a couple of hours. When I drag an MP4 clip onto the timeline, only the audio appears. Can't figure out what's missing.
@MichaelNROH
3 ай бұрын
Did you buy the studio edition? The free version doesn't come with H.264 support which is the codec that is often being used for mp4 by default.
@iguanaman08
3 ай бұрын
@@MichaelNROH Thanks for the reply. I only have the free version. I guess I'll have to convert the video files. 😬
@MichaelNROH
3 ай бұрын
@@iguanaman08 I would recommend using a different codec going forward. With a decent rig, AV1 is an option, even without hardware acceleration
@blkspade23
Жыл бұрын
While the content here overall is great, for your personally described use case, the rocm bits are separate from the actual AMD drivers. So you can keep the opensource display and vulkan drivers either way.
@silloo2072
3 ай бұрын
why do i get this ./resolve: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory
@jamescampbell6728
Жыл бұрын
I'm glad I'm not the only one who went through hell on fedora 38 lol
@mrgor4505
6 ай бұрын
can't install any packages: user is not in the sudoers file....
@AlexeyRiched
4 ай бұрын
how to get rid of the need to re-encode mp4 files for video to work in the Linux version of Davinci Resolve?
@MichaelNROH
4 ай бұрын
Don't record with AAC but with the PCM audio codec and buy the Studio edition. That's the most reliable but also expensive way to do it. There are plugins, however they also often cost money.
@GapRecordingsNamibia
2 ай бұрын
Good day Michael, what system are you running on your pc? If you run fedora directly is the container needed? I am a windows user with grave concernes about coming developments and privacy when it comes to windows. I do not know the first or last thing about linux and there major inconsistencies when you use the term Linux and DaVinci Resolve together... Sorry for the late reply, your video is more than a year old but I am now being forced to look into this option as it seems windows is set to infringe on it's users privacy in a few months time. Thank you.
@MichaelNROH
2 ай бұрын
I run Fedora 40 currently. The reason on why I find the container approach much better than a native install is, because if a dependency gets updated, it will break the installation unless you manually fix it again. On Fedora 38, some of them got updated quite frequently, which meant manual fixing like every other week. There is also another advantage to Distrobox, as you can use the Linux version that Resolve itself wants to use (Rocky OS). Their version is very outdated though, which is why I went for Fedora instead
@GapRecordingsNamibia
2 ай бұрын
@@MichaelNROH Good day, Thank you kindly for the reply, this does make sense, I was just wondering what version/ flavour you were running and then obviously we know what container you were using. Does the container require updates? And, could they potentially "break" an install? I am a total noob to linux so please do forgive my possibly idiotic question.... Thank you.
@yjk_ch
Жыл бұрын
I've already got Resolve working using MakeResolveDeb and AMD proprietary drivers, but at least now I know alternative method when stuff breaks :D The only bummer about Resolve on Linux is that there's no H.264 export support unless you have NVIDIA GPU. I can reencode output to H.264, but still.
@kazekduzy1920
Жыл бұрын
Hi, I have such problem. When I try to install Davinci I have this error: "Do you agree to the terms and conditions of this license? (y/n): y Error: Installer failed Error getting authority: Error initializing authority: Could not connect: Too many levels of symbolic links" Could someone advise ?
@MichaelNROH
Жыл бұрын
Sudo
@creatfunandunique
3 ай бұрын
hello when i try to convert a small file like 20 mb mp4 file to mov through shutter encoder the file becomes like 200mb-400mb and so on ......and when i want to edit a long video ,,,,these types of clip will make 5-10gb already and it will make edit heavy and lag . how to convert to mov or do what.... to edit smoothly and with smaller size
@MichaelNROH
3 ай бұрын
You need a compression codec like AV1. The reason on why the files become that big is, because there is no more compression on them (not quality wise though as H.264 is not lossless).
@creatfunandunique
3 ай бұрын
@@MichaelNROH I have tried Av1 but I found out that quality was reduced are there any other codec or something so the quality doesn't decrease too large and size doesnt also become big I have also tried codec like h264 but the file is not opened by davinci ........ My problem is Most of the time i got mp4 files and have to convert to mov using xdcam hd 422 which make file 5-6 times larger as compared to mp4 file and it makes my davinci slow So are there any other method so size doesnt increase too much and quality doesn't decrease
@MichaelNROH
3 ай бұрын
@@creatfunandunique Quality always needs to decrease if another compression is being applied. You are compressing the compressed video essentially. It's why movie studios record lossless and only encode it from the source material. If you want smaller file sizes then you either need to record in a much higher quality, so that the second compression has more data to work with, or you need to convert the mp4 file to a bigger size without any or much further compression. It's impossible otherwise as H.264 is a lossy format, meaning that you can't restore the original material from the encoded video
@wolfisraging
4 ай бұрын
classic linux solution for any problem always contains: 6:29 "Until we get error like this"
@rjlarussa4136
6 ай бұрын
I was wondering if you could answer a quick question. This setup works great, but Davinci can't seem to open my lut folder. I'm wondering if it works on yours? Do you know the path to where luts are stored inside the container? I can't seem to find the path
@rjlarussa4136
6 ай бұрын
I managed to find it in the standard resolve path, just the hidden ".LUT" folder was missing. I created it and dropped my luts in. It seems to somehow create the default resolve luts on startup so mine are duplicated, as I have all my standard resolve luts in a subfolder. Weird behavior but it seems to work!
@Canleaf08
11 ай бұрын
So fedora is the better distro for DaVinci? I used Xubuntu for that, got it almost launched. Good idea with the container approach.
@MichaelNROH
11 ай бұрын
For AMD hardware I found it to be the best due to the rocm-opencl package that just works. Some other distros also have similar packages (or in the AUR), but many of them don't include everything Resolve needs.
@florianhenig5654
10 ай бұрын
Unfortunately MP4s (x264 and x265) are not working. The video track just does't show up in the timeline and the audio track is completely "silent". Do you know how to deal with that?
@MichaelNROH
10 ай бұрын
On Linux you need to buy the Studio version for H.264 and H.265 support (also the x-variants) because their licenses are not included in the OS. The audio tracks not showing up can be explained by the AAC audio codec, which isn't supported in any version on Linux unfortunately. I work around that, by setting my codec to PCM in OBS instead.
@ozb2006
2 ай бұрын
hi so i am having a ton of problems!, i am very very bad at the cli, and i went to do this with chat gpt, and i've been at it for oo 5 hours now... and i can't get the fedora 37 container to install the program, now sense this is a container then can share a download like to the container you have made? and this way anyone who want's to run davinci resolve under what ever os can just download the container and open in distrobox?
@MichaelNROH
2 ай бұрын
I wish that was possible, but it's not allowed to redistribute DaVinci Resolve without a commercial license.
@Shrapnel_Music
2 ай бұрын
@@MichaelNROH What about Source + Script to install all auto.
@KeBizarroES
4 ай бұрын
With an Nvidia 4090 I have this error: "DaVinCI Resolve could not initialize OpenGL. Please ensure that the latest graphics drivers are installed."
@MichaelNROH
4 ай бұрын
Make sure that you install all the NVIDIA dependencies from the pinned comment inside Distrobox. You also need it on the PC itself
@KeBizarroES
4 ай бұрын
@@MichaelNROH Thank you so much for responding, I watched your videos since a year ago, the PC uses Ubuntu 24.04 and xorg with privative drivers, I did installed akmod-nvidia xorg-x11-drv-nvidia-cuda inside distrobox but I got that error
@KeBizarroES
4 ай бұрын
Hi Michael, I fixed it, thanks!!!
@gerrit4204
Жыл бұрын
Hey I've done the requirement installing step a couple of times but now I get this error: Authorization required, but no authorization protocol specified qt.qpa.xcb: could not connect to display :0 qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found. This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem. Available platform plugins are: linuxfb, minimal, offscreen, xcb. /tmp/appimage_extracted_22f0777ff49985d4de01110e70dd01e7/AppRun: line 346: 116949 Aborted (core dumped) "${CURRENT_DIR}/installer" "${CURRENT_DIR}" "$@"
@DHotdog85
Жыл бұрын
The post by @Afif87123, farther up in the comments section, ended up being the fix for me: Make sure you have xhost installed on the host system. Then in a terminal, on the host system, enter the following two commands: xhost +si:localuser:$USER xhost +si:localuser:root Try installing DaVinci Resolve in the container, again. It should work, now. Seems as though it was a permissions issue that was preventing the container system from being able to access the display server on the host system.
@Chris-el8is
Жыл бұрын
Danke vielmals für deine Hilfe. Werde ich sofort mal ausprobieren. Grüsse
@tapebysea
2 ай бұрын
Awesome tutorial, imma try to do this. Do you know if Distrobox adds any significant overhead?
@MichaelNROH
2 ай бұрын
Technically yes, but it's practically not noticeable at all. Containers are heavily used in the enterprise business and offer near native performance
@theseal6681
3 ай бұрын
I followed every step with an intel arc a770 16gb GPU up until 6:47 since i was in an intel GPU i did not really know what to do next, so i decided to install mesa-libOpenCL and installed then libxcrypt-compat and alsa-plugins-pulseaudio, but when i typed in /opt/resolve/bin/resolve the error message appeared: /opt/resolve/bin/resolve: symbol lookup error: /lib64/libpango-1.0.so.0: undefined symbol: g_string_free_and_steal i do not really know what to do next, so can someone please tell me what to do next? Btw i used linux mint 21.3 edge edition
@pimpatterson
Ай бұрын
install boxbuddy for a more gui friendly approach but still needs command line for initial install
@EnFuego79
Жыл бұрын
Are you aware that Nobara already has most of the dependencies pre-loaded and an app to fix any that resolve is missing? It also has an option to install enhanced AMD drivers. Problem is the BRAW speed test doesn't work, and the RAW video player doesn't work either. Still trying to figure that out.
@cannibalholiday
10 ай бұрын
I'm sooooo close. All dependencies met, but I can't do the install because it can't go online to authorize it. Apparently the container doesn't support my ethernet out of the box, and I'm stumbling over what to do to get it working.
@t0uchme343
Жыл бұрын
I got this video sneak into my recommendeds so I hopped into AUR out of curiosity to see if I'd get problems during installation. I am not a content creator or anything so I won't be actually using it but, true enough, I got some blank, white, apparently welcome screen before I got into the program. I killed the white overlay of death and it was working afterwards.
@Bits4you
Жыл бұрын
appreciate this video. Thank you
@ntisithoj
Жыл бұрын
This was an awesome tutorial... and it appears to have worked flawlessly for some, but Resolve only generates an "unsupported GPU processing mode" error, even though I added "--nvidia" to the Fedotra 37 creation command. "nvidia-smi" work ok, and no errors in the log, but in the resolve configuration, under "Memory and GPU", there is no GPU listed :/
@MichaelNROH
Жыл бұрын
I might have found a solution, but need to backtrace my steps. You can follow the progress on my Discord / Matrix
@ntisithoj
Жыл бұрын
Thanks, but FYI, you invitation link in your about page is invalid :/ Following on Element/matrix, but prefer Discord as Element keeps demanding validation from another device for some reason, which I do not have.
@phamquangminh8391
Жыл бұрын
Is the audio problem of Davinci Resolve still exist on distrobox?
@Ehatari
9 ай бұрын
I have 7800xt and Davinci resolve dont recognize 7800xt and dont see my gpu ?
@MichaelNROH
9 ай бұрын
Did you install rocm-opencl?
@ivandj707
4 ай бұрын
I'm on W 10 but thinking about switching to Linux. Would the simplest solution for me be to first install Fedora 37 as the operating system and thus simplify the installation of DaVinci Resolve? That is, the only thing that matters to me is that I have a linux distro that works stably with DaVinci.
@MichaelNROH
4 ай бұрын
The current version of Fedora is 40. Generally speaking, with distrobox it doesn't matter if you install Ubuntu, Fedora or something else. Just pick the one that looks the nicest. I've pinned a comment with some additional information
@ivandj707
4 ай бұрын
@@MichaelNROH Thank you.
@brethnew
2 ай бұрын
Just installed Kubuntu and I'm trying to get dnf installed, however it's saying "Unable to detect release version" and "There are no enabled repositories in ...." Can anyone assist me to adding repositories to dnf so I can use the command line he posted in the comments?
@Shrapnel_Music
2 ай бұрын
you likely just need 'pkexec' so, sudo apt install -y pkexec It's the Super Unknown dependency that no one tells anyone to install.
@@Shrapnel_Music Error: There are no enabled repositories in "/etc/yum.repos.d", "/etc/yum/repos.d", "/etc/distro.repos.d".
@Smarthalayla
9 ай бұрын
Questions- if I want to move from Windows 10 to Linux and having all the third party software run on Linux. Some of those are portable software which don't need installation on windows. Will the work? Also, I would like to keep the look and feel as in Windows 10 with a "start" menu as it was in windows 7. which version of Linux will do the job without any hassle?
@MichaelNROH
9 ай бұрын
It would depend what that third party software does. If they include drivers, then they won't run the same as on Windows. The rest just might. You can take a looks at compatibility on the WINEHQ website. Generally speaking, if you want the classic Windows experience, then you should go for the KDE Plasma Desktop environment. If you still want to tweak it a bit, then you can do so. They advertise popular distros on their website as well, so you can just choose one. They are all similar
@antonvoloshin9833
7 ай бұрын
Only one question - does it solve the problem with codecs in free version? I highly doubt that...
@MichaelNROH
7 ай бұрын
No. Unfortunately both MacOS and Linux have a more restrictive access to those but in reality this isn't as much as a problem as it might seem. Recording with a different codec and some tinkering with ffmpeg hardware acceleration results in a similar or even faster editing time. H.264 footage is a bit slower to work with and export rather than less compressed footage. Is it a bit more work? Yeah, unfortunately, but the payoff is worth it. In fact, I had a Windows Editing Virtual Machine with a GTX1080 once and I also started transcoding on Windows since it became the faster method
@antonvoloshin9833
7 ай бұрын
@@MichaelNROH Yes, that's all true, but the thing about workarounds is that they are... well, workarounds :) So it's still some additional layer of work, time spent etc. And let's not forget, that every transfer from one lossy format to another is a loss of some portion of information. If this all happening on MacOS - I couldn't care less, Apple fans should suffer or pay, or pay and suffer - this it the way :) But on Linux... that's a bummer. Me, personally, I didn't have any troubles installing DaVinci on LDME6, but this thing with codecs was just a massive roadblock. For now I'm trying out native open-source editors like Kdenlive and Shotcut for editing work, let's see how it'll go. It's a step down for sure, 'cause DaVinci is THE best, but maybe one step down from the best would be good enough still.
@igorgiuseppe1862
Жыл бұрын
this solution will use the same ammount of resources as an virtual machine? because i have an potato pc...
@DJNightchild
Жыл бұрын
No, because it's not virtualization. Containers do not take much resources, except perhaps disk space.
@henriquekirchheck
Жыл бұрын
Containers use the same Kernel as your native distro making them incredibly efficient, so it will only need a little bit more disk space because of the repeated dependencies.
@monochrome_linux
Жыл бұрын
Containers run at the same speed as your host PC. The only sacrifice is some storage space.
@creamycustardstudios2414
8 ай бұрын
hey man, i got a error if any one can help please do. Error: OCI runtime error: unable to start container "c457d0558bbda6720627ff7862c4a3b2cb4ad6d70873a0cd92b1e2e5ed87732d": crun: sethostname: Invalid argument this is after i went to enter the container
@MichaelNROH
8 ай бұрын
I've heard that the hostname of your system might be too long (64 Characters). You might consider changing it in the settings if that's the case. Hostnames are usually nowhere near that long
@creamycustardstudios2414
8 ай бұрын
Hey Michael,I looked at my host name and changed it to only 4 characters. The error still showed. I also tried to restart podman. I put in the id of the container and the name of it. I also tried to put in my host name. But that did not work. It was saying that It could not find any container with that name or id. I know nothing of podman by the way.
@Hariharan_Sridhar
Жыл бұрын
I use debian12 distro. I followed every step in this video and it worked till installing 'rocm-opencl'. when i try to install it , it says like "Unable to locate package rocm-opencl". For the other pakages also, it says like "Unable to locate package libxcrypt-compat E: Unable to locate package alsa-plugins-pulseaudio". I tried searching solution in google but couldn't find anything useful. Suggest me a solution to resolve this.
@MichaelNROH
Жыл бұрын
Which container did you choose and did you enter it? All of those packages are availabe from the Fedora repos within the container
@Hariharan_Sridhar
Жыл бұрын
@@MichaelNROH I choose the debian 11 container "debian:stable-backports"
@MichaelNROH
Жыл бұрын
@@Hariharan_Sridhar That explains it. I'm not aware that the rocm-opencl package exists in the same way on Debian like it does on Fedora. There is a reason why I chose Fedora 37 over other distros for the container
Пікірлер: 461