Super complex setup if you try it alone, without watching this clip. Watch it, learn and listen. Super!!!!
@mrtwomore
2 жыл бұрын
Amazing and concise tutorial! Thank you so much from New Zealand
@lzak72601
4 ай бұрын
Thank you! I was getting the errors explained in this video. Thank you helping me! Keep it like this!
@matteocassino3172
Жыл бұрын
Thx so much for this very comprehensive and understandable tutorial. All runs fine on D1 mini. 🙂
@DaPanda19
3 жыл бұрын
Ty, simple and easy to follow 😀
@muzguz7276
6 ай бұрын
Clear, concise & to the point. Very well done & thanks.
@radcat5348
2 жыл бұрын
Helped a lot, best in youtube, thanks!
@SSS_S_S.S_S_SSS
Ай бұрын
bro how can i customizable the web interface? the converter in utils folder is probably not working bc when i upload my own web pages and try to connect to esp in browser, i seeing an empty white page. i dont understand that.
@danilooliveira_cyber
5 ай бұрын
Hello, I tried to reflash my dauther (v7) but the screen is no longer displaying information, can you please tell me which firmware is correct in the Arduino IDE? Thanks.
@faricdsouza5313
18 күн бұрын
Im having an issue with the device, as the lily go display isnt functioning
@Hellnation13
Жыл бұрын
My dude you’re the best
@Bruh-rn4ez
Ай бұрын
please help I have an esp8266 which one do I click?? generic ? or nodemcu and it doesn’t let me see which port it’s plugged into. help needed!!
@herrsa3899
3 ай бұрын
Hey Stefan, wo kann ich bei der V3 Version des deauthers eigentlich den Wifi Namen umändern.
@taylor7334
Ай бұрын
duuuude the jokes in this video are killing me
@Zzznmop
3 жыл бұрын
Are there any concerns following this guide with ESP8266 vs ESP8266d?
@sanaanas2010
8 ай бұрын
The deauther board is not available What is the solution
@axelowgeneta226
11 ай бұрын
Sir im using node mcu, when im using just node mcu its fine but when i add the spi display its always restarting
@ygjt76v0-----
2 жыл бұрын
Young and smart
@thereptilian9731
3 жыл бұрын
The original the one and only.
@glil477
2 жыл бұрын
Hey i really like this project my friend showed it to me and i wanted to try i have already had a ESP32-wroom but it was not working on it i have tried to sellect ESP8266 and nodeMCU on the board manager but it failed uploading could you give me help or add the ESP32 and ESP32-wroom in to the board managger. Thanks and keep it going.
@ttomi495
3 жыл бұрын
Is this some kind of reupload? :o Cuz i like did ur tut from github one or two years ago😂✌🏽
@user-jp1tn9pf8o
Жыл бұрын
there is no 'deauther esp8266 boards by spacehuhn technologies' in Arduino board manager
@kockokrecektv8978
Жыл бұрын
I have same problem.
@MajesticNaan
2 жыл бұрын
Hey Spacehuhn, where in the github repo can i find the script for the deauthentication code as i want to use it for a similar project?
@spacehuhn
2 жыл бұрын
In case you’re still looking for it. We made a blog post about the whole topic: blog.spacehuhn.com/wifi-deauthentication-frame/
@MajesticNaan
2 жыл бұрын
@@spacehuhn thank you
@expl0dingcat
3 жыл бұрын
Will V3 get web and display support?
@Semtex199
3 жыл бұрын
thats neat :) Thanks !
@GTvideoHD
Жыл бұрын
It is possible to add some new graphics, bitmaps, to user UI? I've tried to personalize just a bit UI in menus, and I watched the library used for ssd1306. But I can't afford to add more than just ascii emojis. Even, I can't afford to add just a new strig character, just literally just one :(
@123123mike
8 ай бұрын
this work with egeloo uno r3 board?
@danyalahmad2097
Жыл бұрын
does this deauth desktop laptop too?
@user-ro9tw4ux5i
6 ай бұрын
is it possible to put deauther and evil twin on one board..or i will need separate boards
@meloman1551
10 ай бұрын
can you make a vdo explain how the codes work and why it have many files why is it difference from other
@arnaudbouly2650
2 жыл бұрын
excellent !
@odaycrew5763
2 жыл бұрын
can nrf24l01 module be added for more range? please answer me 🙏
@lzak72601
4 ай бұрын
still no pwnd, and i don't understand why....
@yhwach9227
2 ай бұрын
i had a dsplay error after instaling this software can you help me?
@yhwach9227
2 ай бұрын
dont care i fix it
@zuzzu.1884
2 жыл бұрын
there isn't any deauther board :(
@3dprintingitsupport47
Жыл бұрын
Hi, I was wondering if you have a guide on how to make this a bad usb and stuff. 🙂
@tonkofonko
Ай бұрын
Hello. Pleade can u make video about Roll Jam key fob using 433 MHz cc1101 with esp32 with saving captured key fob signal to SD Card and then pick it cor emulating with using some buttons and Oled 0.96" display ? It is super cool arduino project but hardcore to program it. Please make tutorial & have a nice day.
@Guitardemonsj
2 жыл бұрын
Hi, what is the password for the wifi network??
@spacehuhn
2 жыл бұрын
deauther
@Guitardemonsj
2 жыл бұрын
@@spacehuhn Thanks
@julsrosalia
2 жыл бұрын
Hello Sir, how to expand d coverage range?Ty
@elomnusk187
2 жыл бұрын
it says fatal error: EEPROMHelper.h: No such file or directory
@harshpathak4967
Жыл бұрын
i am facing an error with the code can you help me. And i am attaching the error also esp8266_deauther:10:12: fatal error: user_interface.h: No such file or directory #include "user_interface.h"
@Anonignpc
10 ай бұрын
Same did u find any solution
@emilka9537
9 ай бұрын
@@AnonignpcI think you need to download the library
@sashanksharma6881
4 ай бұрын
@@emilka9537 same bro did u find the solution
@ashoksaha4
11 ай бұрын
sir waiting for new version of deauther❤😊
@Ghettogamer666
2 ай бұрын
dos this work for esp32
@glen4cindy
Жыл бұрын
This is a great tutorial but I was hoping you would go into more detail about the button setup. I can't get the buttons working on my build. I've searched and found several others having the same issue.
@emilka9537
9 ай бұрын
I also have the same problem, I checked everything, tried to change the code somehow, but it did not give any results, maybe you have already solved this problem?
@Bariyys
Жыл бұрын
is it possible to use e Pater HAT instead of OLED? I understand that e paper has much slower refresh rate, but is it possible? (my is Waveshare, 2.7inch ePaper HAT, 264x176, SPI), sorry if its stupid idea, I am just a beginner
@theXploitNation
Жыл бұрын
Esp8266mod?
@26TM205
Жыл бұрын
Do you have a similar project but for bluetooth? i.e. a bluetooth speaker de-auther?
@bawaljudgemental7173
2 жыл бұрын
Does RTL8720 BW16 can use the firmware of ESP2866 from 2.4 ghz to 5 ghz??
@samsuljetpump6239
Жыл бұрын
What version wmos d1 mini boards you use in that video?
@Synzet
2 жыл бұрын
Will this work on the maker focus esp 8266 wifi deauther module with case? Not the watch, the green one with the white case
@samsoncolaco3424
Жыл бұрын
the deauth stops after 15 min , anyway to remove that setting?
@САЗОНОВИЧ
Жыл бұрын
Hi 👋 It’s possible to use rtlduino rtl8720dn like 2.4-5ghz deauther/jammer?
@nellyskills
Жыл бұрын
I wanted to ask why it could be that everything works except the 3 buttons. I checked super often whether everything is wired correctly and I can't find any errors. What could be the problem.
@emilka9537
9 ай бұрын
Many people have this problem, and so do I.😢
@mikpolytrading7350
9 ай бұрын
c est surement a cause du firmware que vous utilisez essayer de flashé une autre version ou la broche de la masse qui controle les bouton a un problème j espere vous avoir aidez@@emilka9537
@coyoteftp
3 жыл бұрын
When I try to compile the code the following error is shown: " esptool.FatalError: Invalid head of packet (0x46) ". I'm using a esp8266 module. Someone can help me with it?
@uthayakumarutheethan691
Жыл бұрын
where did you learn to code nodemcu bro i want to study it too
@zynthypops
2 жыл бұрын
spacehuhn You think RTL8720 Arduino will work with 5ghz?
@RggD9
Жыл бұрын
Why after flashing i have boot mode rst 4 boot mode 3 6 in serial monitor
@dingomarauder
Жыл бұрын
Hey, is there a way I can put this on a LoRa v3 esp32?
@Edwardify
Жыл бұрын
How would I go about changing the pins used for the display
@alex59292
Жыл бұрын
change the code lol
@myerwerl
Жыл бұрын
Then how do you open the list of exploits?
@emc2626
Жыл бұрын
Button not working
@Dden07
Жыл бұрын
I really need help with programming my deauther watch I tried to update it but i did something wrong now the screen is off if I turn on the watch help meeeeee😭
@Braydenbste
Жыл бұрын
please help. it says Compilation error: fork/exec
@uxoss530
3 жыл бұрын
can u insert the fitur with mode station wifi to?
@ryanmijares8331
2 жыл бұрын
can i attack some specific SSID? and how do i do that? thanks!
@forgiven_lightofficial3732
2 жыл бұрын
Can I make a deauther with a normal lcd screen as a hub with Alexa capability just by combining 3 8266 chips. Also having the third chip be a wifi extender. All managed by the hub screen
@forgiven_lightofficial3732
2 жыл бұрын
I've seen projects just curious if they would conflict eachother if I added 2 to the same board.
@KyleJCane
2 жыл бұрын
Sir i need help what about for android how do we do that on android
@Iblamekota
Жыл бұрын
does it work for hiletgo?
@agunkcrakzer2751
2 жыл бұрын
cara menghidupkan nodemcu dengan menggunakan powerbank bangaimana ya bang, nodemcu v3 kalau dicolok powerbank hanya sebentar saja nyala lalu mati lagi, mohon bang arahannya agar nodemcu bisa pakai powerbank
@ebkblack2065
9 ай бұрын
I did what u said now all my stuff wont turn back on
@m-luthfi
2 жыл бұрын
so, this can make nodemcu to "fun mode" 🤣
@kjrholmf472
Жыл бұрын
link to cable?
@BlackBearFTW_
2 жыл бұрын
does this work with the ESP32?
@chargedlabs3506
Жыл бұрын
no the esp 32 can't carry out deauthentication attacks
@bruhmoment23123
2 жыл бұрын
an idea I have is you can make an android phone a deauther. you would do this by having the phones wifi chip be the hardware and you could make an apk for the software and control it
@rolandkirsch6045
3 жыл бұрын
Wie ändere ich Beacon Texte
@sotecluxan4221
3 жыл бұрын
Incroyable.
@donkernash7729
Жыл бұрын
Hi sir this is a very nice project, sir I want to use ssd1309 spi OLED with node mcu sir, so please if you can tell me how to change settings for the display please sir
@abhicode
Жыл бұрын
How to change the Hotspot Name and Password?
@emilka9537
9 ай бұрын
In the settings on the website, or in the code (through the website it is much easier)
@nestlereypahayahay9492
4 ай бұрын
Hello Spacehuhn! I just want to ask if there's a project for "5G WIFI DEAUTHER" using the BW16 RTL8720DN, the same as the ESP 8266 Node MCU. I saw a video on KZitem of the BW16 RTL 8720DN equipped with 2.4 + 5G dual band WiFi. Same size of the ESP 8266 Node MCU. I think you can make a 5G WiFi Deauther on it. I hope you will review that chip. I can't attach the pictures and PDF regarding that chip to your contact support page. Thanks. I think it is POSSIBLE! Here's the KZitem link for BW16 RTL8720DN 5G Chip: kzitem.info/news/bejne/tWdm3nefhpFllqwsi=1tWRQJYThDvyTcmj
@quassildigg8755
3 жыл бұрын
also i made a long range Deauther using Wemos
@AnonymousSeafarer25
3 жыл бұрын
How to long range using d1 mini?
@quassildigg8755
3 жыл бұрын
i already have custom software to upload the Deauther to Wemos :) easy pC
@GlobalConflictChannel
Жыл бұрын
Hope that the next esp8266 deauther can be controlled using telegram.
@yuhu6565
Ай бұрын
Bullshit, its packet injection is way too weak. Packet injection involves sending packets at a rate that can be processed by the target network. The effectiveness and tolerance of packet injection in modern WiFi networks can vary depending on several factors, including the network's hardware, software, and the specific conditions of the attack. Here are some important points to consider: 1. **WiFi Standards and Throughput**: Modern WiFi standards like 802.11n, 802.11ac, and 802.11ax offer high throughput, measured in megabits per second (Mbps). These standards can handle a significant amount of data transfer, often in the range of hundreds to thousands of megabits per second. 2. **Management Frames**: Deauthentication packets are management frames, which are relatively small in size (typically around 26 bytes). The rate at which these can be injected depends more on the capabilities of the attacking device and the network's capacity to handle incoming packets. 3. **Network Load**: A heavily loaded network with many active devices and high traffic might be more resilient to packet injection attacks, as the injected packets might get lost or ignored amidst the legitimate traffic. Conversely, a less busy network might be more susceptible. 4. **Attack Rate**: The rate at which packets are injected can affect the attack's success. If packets are injected too slowly, the target devices might not be effectively disrupted. If packets are injected too quickly, it might raise alarms or get filtered out by network defenses. Typical deauthentication attacks might inject packets at a rate of several packets per second to a few hundred packets per second, depending on the specific circumstances and the attacker's strategy. 5. **Network Defenses**: Modern networks often have defenses against deauthentication attacks, such as intrusion detection systems (IDS) and intrusion prevention systems (IPS), which can detect and block excessive deauthentication frames. The tolerance of these systems can vary, but they generally aim to prevent malicious activities while allowing legitimate network operations. In practical terms, an ESP8266 device like the Wemos D1 Mini can inject deauthentication packets effectively if used within the limitations of the network's tolerance and the device's capabilities. The exact tolerance in bytes per second will depend on the specific network environment and the countermeasures in place. Aka it wont work. Try it using your 2 phone and 1 real wifi router. It wont work even if your antenna is as big as a moon
@Scavenger_4_Tech
2 жыл бұрын
where the fuck is a guide on how to acutally use it
@Doiphie
Жыл бұрын
my screen is black i can't use the watch i think i'll send it back
Пікірлер: 110