The intro caught me in the feels. love 5fdp! Glad the install seems nice and simple through I'm thinking about getting an agressive front bumper off CarID
@hussein5743
8 жыл бұрын
I'm really surprised that no one binched about it being a v6
@Tommynator666xxx
6 жыл бұрын
2v Sally V6 is trash
@AGNDAHOUSE
5 жыл бұрын
Cuz tbh the gt isn't that much more impressive they are both slouches
@jalt7457
8 жыл бұрын
Great informative video! However, how did you know what HID bulbs was compatible with the fog lamp its self? How did you know what HID bulbs verses OEM bulbs would fit in the lamp? And how do you adjust the fog lights as you mentioned in the video?
@blueedge181
7 жыл бұрын
J Alt The fog lights themselves are factory replacements for the fog lights that would be on GTs. Therefore they use the same bulbs that GTs take. It believe the bulb size is H2, but don't quote me on that. I'd recommend looking up the bulb size online.
@dragonstone20042004
4 ай бұрын
I have 98 v6 Mustang and my didn't come with fog light either my question is how did to install your fog lights with a bracket for the fog lights.
@richdevens8691
8 жыл бұрын
Thanks for posting! I've been getting ready to do the same thing to my Red 2002, but I plan to use the GT switch and get a harness to connect it to the factory wiring and fog lights. I've been looking at the same fog lights in the link you posted, but still need to decide between those and ones with yellow lenses.
@blueedge181
8 жыл бұрын
+Rich Devens I'm personally not a big fan of the yellow ones. I went with the smoked ones because I'm trying to do a black-out theme. But to each his own. If you aren't doing any particular style or theme, the yellow ones would look good, especially with your car being red.
@DavidSherman1980
7 жыл бұрын
I see this comment is from a year ago, but did you get your fog lights installed with the GT switch? I just purchased lights and a switch for my black 2002, and the switch was easy since the factory harness was already behind the dummy placeholder in the dash, but I've yet to do the rest of the wiring. I was told additional relays may need to be purchased to use the switch properly. Would be curious to hear how your install went and anything you may have run into that was unexpected during the install. Thanks!
@Wildcat19688
5 жыл бұрын
David Sherman hello did you ever get yours going through the normal gt switch?! thanks!
@DavidSherman1980
4 жыл бұрын
@@Wildcat19688 Nope, 2 years later and I decided to try this project again. Still not much info online about how to wire into the existing harness with the GT dash switch. But I'm going to figure it out somehow this time!
@KillerBeast25
8 жыл бұрын
Nice vid man , I'm here in the 4o2 as well!
@blueedge181
8 жыл бұрын
Sweet dude! We should meet up sometime and cruise.
@KillerBeast25
8 жыл бұрын
sure man, im rocking a 6 banger as well
@blueedge181
8 жыл бұрын
+KillerBeast25 Nice! I could introduce you to some of my buddies. We're usually out cruising O street most weekends.
@KillerBeast25
8 жыл бұрын
yeah man sounds awesome!
@ceaserthemonkeyking8818
4 жыл бұрын
Do you have to cut the wire in order fo them to work or can you insert like the black one?
@lepopcornnaisseur546
3 жыл бұрын
How did you mount the fog lights to the front bumper?
@fabiotuzzi3724
6 ай бұрын
Im doing the same install, what screws did u use to fix them on the bumper? My mustang didnt come with any fog lights like yours. thx!! ANd good job!
@lochglizzy8331
4 ай бұрын
were you able to figure out what screws can be used?
@fabiotuzzi3724
4 ай бұрын
@@lochglizzy8331 not yet, weather has been crap so far too chilly to work jn the garage. Hopefully soon
@lochglizzy8331
4 ай бұрын
@@fabiotuzzi3724 10/4 i ordered some and they got delivered today so i’ll probably go by oriellys or auto zone and see if they have anything i can use. if i find out the dimensions of the screw i will come back and comment here!
@fabiotuzzi3724
4 ай бұрын
@@lochglizzy8331 That would be awesome thank you!
@lochglizzy8331
4 ай бұрын
@@fabiotuzzi3724 i don’t get off until 5 and i’m in central time so it may be a while, just didn’t want you to think i had forgotten later lol
@sounds5397
5 жыл бұрын
HID’s will eventually start melting the plastic that’s why you don’t get HIDs unless the light housing is made for it
@rolandobazaldua4094
7 жыл бұрын
what screws did you use or where did get the screws from
@azhurelpigeon
8 жыл бұрын
I just want to remove the fog lights from the bumper, is that easy to do on the GTs?
@blueedge181
8 жыл бұрын
If you crawl under the bumper and get to the backside of the foglights, you should be able to see how they're mounted. There are just 3 bolts holding each one in. Unplug them and remove those bolts and you're golden! Message me if you have any issues!
@angeldelacruz1907
4 жыл бұрын
Help me!!! I have a 2003 mustang gt and my fog lights won’t work I’ve checked all the fuses tried new switches what should I do now
@AFXGaming
4 жыл бұрын
Check the bulbs and the wires
@aaroneckhardt749
7 жыл бұрын
Hi just wondering did you use the blue HID or white?
@blueedge181
5 жыл бұрын
Aaron Eckhardt I used 6000k, so it’s supposed to be white but it does come across as a little blue. Could be because of the smoked fog lights
@FinsleysCustomCarAudio
7 жыл бұрын
Any melting? I keep hearing that HIDs will melt fog light housings.
@blueedge181
7 жыл бұрын
xXTHECARGUYXx the fog lights that I went with have vents on the back to allow some air circulation. If melting is something that you're concerned about, you could use standard bulbs instead of HIDs. Wiring would be the same, just without the ballasts.
@Plan_v8
6 жыл бұрын
Aye badass you're from Nebraska too
@marcusspicer2676
4 жыл бұрын
What type of tool you used to chisel out the fog light bars?
@blueedge181
4 жыл бұрын
Marcus Spicer I believe I cut them out with a pair of cutters and then smoothed it up a bit with a dremel. It’s been a while since I did this, so I can’t remember for sure. They’re just plastic, so they cut easily.
@elvismorales2976
5 жыл бұрын
Hey I have 03 mustang and I'm trying to install fog lights how can I install just leds and where can I get the hardness that plugs into the fog lights and just get power from the side markers
@blueedge181
5 жыл бұрын
Elvis Morales Get a set of 893 bulb pigtails. They’ll have the plugs for the bulbs and a decent length of wire to wire them in. LED’s won’t have separate ballasts or any extra wiring like with the HIDs. As long as you wire them the way I did, you’ll get power from the side marker bulbs. A lot of LED fog lights will have the necessary resistors built in and some sort of cooling fan or heat sinks built in. Don’t go the cheap route with LEDs or HIDs!
@elvismorales2976
5 жыл бұрын
@@blueedge181 thank you for your response but do you a recommendation on LEDs that could be good
@javiermolina5723
8 жыл бұрын
I'm trying to do the same thing to my mustang, but I'm nervous about the wire splicing. How did you do it?
@blueedge181
8 жыл бұрын
I used heat-shrink butt-splice connectors. They're basically a small metal tube wrapped in heat-shrink material that's open on both ends and can crimp onto wires. Heat them with a lighter/torch/heat gun and they're waterproof. I no longer have the car that I made this video on :( but you might be able to pause the video when I show how I wired it to the live (purple) wire. You can ground the plugs to almost anything metal on the car, so you don't need to worry about splicing wires when doing the ground. Message me if you have any other questions, I'd be more than happy to help!
@bluedinero3055
7 жыл бұрын
BlueEdge butt splice 😭 😂
@robertvanhorn5635
8 жыл бұрын
how much did they cost and your buddy probably bought his led from eBay
@raularreguillin
5 жыл бұрын
I know this is many years late, but could you help a brother out and resend a new current link for the fog light wiring. The link you have says it’s no longer available
@blueedge181
5 жыл бұрын
Raul Arreguillin Yeah it looks like amazon doesn’t carry it anymore. The brand of HIDs I went with was Apex. Maybe they have a website or something? The bulb size is 893. Hopefully that helps! Even if you can find another brand that includes the same stuff, I’m sure it’ll work. Send me a message if you have any other questions!
@americanmuscle3090
2 жыл бұрын
23.00 on eBay comes with bulbs.
@pedrosegura329
8 жыл бұрын
v6 r nice save me money
@juanalcala5822
6 жыл бұрын
Que tipo de bulbo lleva ?
@Slime-gg4qv
5 жыл бұрын
Did the wires come with the fog lights
@blueedge181
5 жыл бұрын
Slime 1400 The HID kit included all the wiring I used. Another viewer did point out that the kit I used is no longer available. So whatever kit you find, make sure that if it doesn’t include a pigtail that you buy 2. They’re just regular 893 bulb pigtails.
@emanuelcastillo6134
8 жыл бұрын
do they come with the wiring kit ?
@blueedge181
8 жыл бұрын
+Emanuel Castillo The HID kit comes with 2 of everything shown at 1:57. So theres two bulbs, two ballasts, and two plugs. I did a little bit of custom wiring since my car didn't have fog lights factory, but the kit will have everything you should need. Shoot me a message if you have any other questions!
@kaylinsullivan2082
8 жыл бұрын
Hey i just bought the same foh lights on amazon.. did you have any problems with the fog lights not mounting up straight? mine aren't flush with the holes at all
@blueedge181
8 жыл бұрын
Hi Kaylin. If I recall, the top holes lined up pretty well, but the bottom hole was off by a small amount and it took a little bit of adjusting to get them in. Try contacting the seller on Amazon and see if it was just a manufacturing error. Sorry to hear about your troubles!
@mabast007
6 жыл бұрын
Ebay sells it for 22 bucks.
@xSilentxKilllerx
8 жыл бұрын
So since you wired them right into the running lights do they just come on every time you turn on your main lights?
@blueedge181
8 жыл бұрын
+xSilentxKilllerx Yes, that is correct.
@FranciscoRodriguez-zx8wj
7 жыл бұрын
Where did u bought the harness
@americanmuscle3090
7 жыл бұрын
Francisco Rodriguez ebay
@bvilleok09tb
8 жыл бұрын
How did you cut the bars out?
@blueedge181
8 жыл бұрын
+Travis Burris Hi Travis. I took a pair of cutters to initially get them out and then cleaned it up with a Dremel. They're just made of plastic, so they come out pretty easily.
@americanmuscle3090
2 жыл бұрын
Hid will melt your plastic fog light housing.
@2vgod460
2 жыл бұрын
Why not wire it to the switch
@blueedge181
2 жыл бұрын
V6s don’t come with a fog light switch and I wanted them on whenever the headlights were on anyway. So I personally chose to not install a switch!
@die0000001
8 жыл бұрын
How do I mount the fogs onto my bumper?
@blueedge181
8 жыл бұрын
+diego sandoval Hi Diego, sorry about not getting back to you sooner. There should be holes already drilled in the inside of the bumper and on the bottom of the bumper. Get up underneath the car and see if they are there. I searched in my bins of bolts and found some bolts that fit. Let me know if you have any other questions or problems and I'll be happy to help!
@72Stiles
4 жыл бұрын
Does the V6 Bumper already have nuts installed for the top two mounting screws?
@AFXGaming
4 жыл бұрын
No, I'm using zip ties for mine lol
@fabiotuzzi3724
6 ай бұрын
@@AFXGaming Oh gosh... lol Still working? :D
@ayodemayo
7 жыл бұрын
iTs braiught jennay
@Angel12938
6 жыл бұрын
Hi
@Dannymclovin
6 жыл бұрын
The housing for the fogs did you get them of a gt or something
@blueedge181
6 жыл бұрын
Dannymclovin69 the fog lights came with the mounts on them. The links for everything I used are in the description
@Dannymclovin
6 жыл бұрын
BlueEdge thanks
@calistrollamas7938
5 жыл бұрын
Song in intro?
@blueedge181
5 жыл бұрын
Calistro Llamas Wrong Side of Heaven by Five Finger Death Punch
Пікірлер: 80