UPDATE - Fixes for Kali Linux are listed after the instructions, (Kali Linux fixes video: kzitem.info/news/bejne/1Wmb36SEs5R3n4I ): Short instructions for installing Kali Linux: Install nano from a terminal: sudo apt install nano -y Edit repository source file: cat /etc/apt/sources.list # Generated by distrobuilder # deb deb.debian.org/debian bullseye main # deb deb.debian.org/debian bullseye-updates main # deb deb.debian.org/debian-security/ bullseye-security main deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script (/usr/bin/gox): Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (/usr/bin/gosyn): xhost + && sudo synaptic && xhost - Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn ------------------------ Fixes: To fix no audio, a prefix can be used: env XDG_RUNTIME_DIR=/run/user/1000 For games, you may need to add /usr/games. For example, for Frozen Bubble: env XDG_RUNTIME_DIR=/run/user/1000 /usr/games/frozen-bubble Some programs may require a special feature to be enabled. You may need to check the documentation for that program. For example, dash dash sound enables sound for Powermanga: env XDG_RUNTIME_DIR=/run/user/1000 /usr/games/powermanga --sound To fix no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side. From a terminal: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Questions are welcome and encouraged. Due to the design of KZitem's comment section, posting questions under the pinned comment or under another user's comment makes it difficult for me to find and answer questions. Please do not post your questions under the pinned comment or under other user's questions. Please create a new comment.
@InsertNameHere.1719
8 ай бұрын
FINALLY ^___^ some straight forward instructions that execute flawlessly. Thank you Ruth your a legend.
@Keyboardwarrior6996
5 ай бұрын
You are the best! I tried doing it through crouton but I did not work kept getting a container issue. I followed your instructions step by step I got it in one try you are seriously amazing ! I would love to get my certs courses through you if you offered it amazing job seriously!
@markivkovic7235
6 ай бұрын
Genuinely the most useful video on KZitem I've watched this week.
@witwoowitwoo2287
8 ай бұрын
Thank you for this video I use a Chromebook and IV recently started a cyber security course and I've been trying for weeks to get Kali on to my laptop
@Deals-Here
7 ай бұрын
thank you soo much !!!! i had chromebook and wanted to install kali on it i think this video is much much helpful for me !! please continue making video like this !!! at last thanks a lot !!
@Vidsforyou49
8 ай бұрын
omg thank you so much ive been waiting for this type of vid for months maybe even for a year since we cant use crouton in the same way we could about 2-3 years ago thank you so much it worked so well
@fredalstrom8964
3 күн бұрын
Stumbled on your video, I got to say that is the most concise set of instructions. I have a question, is this only limited to the xfce desktop? Can others be installed like GNOME or Mate? Or is it because xfce performs better in the nested environment?
@BenevoxAfrica
13 күн бұрын
You're so coooooool, thank you for this
@dingokidneys
7 ай бұрын
Nice tutorial. Clear and concise with enough explanation of what each step is doing. I've been hacking on Linux for nearly 30 years and have never had cause to use Xephyr so this was enlightening. I also learned a new shell idiom; '&>' for redirecting stdout and stderr together. Never ran into that before though I'm sure I've read just about the whole of the bash man page (which is huge) at some point. There's always something new to learn which is one thing I love about computing.
@austinlohmiller1149
Ай бұрын
can u teach me some stuff bc i have been trying to figure alot of it out and ik some of it not alot i have been doing it a while
@dingokidneys
Ай бұрын
@@austinlohmiller1149 There are lots of KZitem channels dedicated to this kind of learning as is this one. Another is www.youtube.com/@LearnLinuxTV/videos He's got lots of basic to advanced stuff.
@juniorq2491
8 ай бұрын
Thank you! Greatly appreciate it!
@GameOfNine
7 ай бұрын
Awesome 🤩 Thank you!
@user-ye4mz7ni5g
8 ай бұрын
This Is Awesome! Thank you!
@Giganand
8 күн бұрын
I forgot tje command to run kali linux for example gox
@psycho6613
2 ай бұрын
Hi mam i m all correct type command... Then last gox command not working not loading kali display 🙂
@ruthake
2 ай бұрын
I would recommend shutting down Linux, shutting down the Chromebook, restart the Chromebook, put the Chromebook online, start up Linux again, and try executing the gox script. If that doesn't work then please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & ----------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@702johnny
8 ай бұрын
Your videos are great.
@zalxploit_7
4 ай бұрын
Thank you, may God bless you and always be successful, Ruth🤩
@Voice_0f_Liberty
Ай бұрын
Your too cute to be doing naughty things like installing Kali on a Chromebook! LMAO jk just found your channel thanks for the tips pun intended ;)
@lorrierobinson3537
17 күн бұрын
I've tried to install Kali Linux on my new chromebook, followed all steps and rechecked them but when I type "gox" I get a blank screen and nothing else. I removed the “&> /dev/null” from the gox file to see the error. When I re-ran gox I saw the following error: sudo: error initializing audit plugin sudoers_audit. Any ideas how to fix this?
@ruthake
17 күн бұрын
That was good troubleshooting with removing the &> /dev/null and supplying the error message. Please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & ----------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@LuminousLiftOff
Ай бұрын
great content it worked
@adamsclement2705
7 ай бұрын
Thanks for sharing :)
@CyrusBlades
6 ай бұрын
I seriously love your videos and what you make possible for so many people!!! You're a truly amazing youtuber!!!
@deathstroke2407
3 ай бұрын
It was a great video, I’ve done exactly you told and had no problem installing it but after installation it shows black screen after I hit gox, can you assist me?
@ruthake
3 ай бұрын
It is likely an issue with the go script. Please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & ----------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@deathstroke2407
3 ай бұрын
It worked thanks a lot
@tomernek
4 ай бұрын
Got everything up and running, thanks for a great video! But i do have a question, im missing a LOT of tools in kali, when trying to get them, not able to locate the package. Any tips to repositories that have access to the kali tools?
@ruthake
4 ай бұрын
It may be a network issue in Linux. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux
@brentharris6666
2 ай бұрын
This is great thank you. Is it possible to use this process to install any other repos?
@ruthake
2 ай бұрын
The closer a distro is to Debian, the more likely this procedure will work: Canonical is no longer supporting LXC: discuss.linuxcontainers.org/t/important-notice-for-lxd-users-image-server/18479 There are older articles: wiki.archlinux.org/title/Chrome_OS_devices/Crostini ubuntu.com/tutorials/install-ubuntu-on-chromebook#1-overview ChromeOS runs Linux in a nested structure: ChromeOS / CROSH -> VM / Termina -> LXC Container / penguin There are 2 ways to start up a CROSH terminal: Alt+Ctrl+T From the ChromeOS Chrome browser: URL: chrome-untrusted://crosh VM / Termina VMC list, start, stop, reconnect, destroy (USE DESTROY WITH CAUTION), and help: vmc list vmc start termina vmc stop termina vsh termina vmc destroy termina vmc --help LXC Container / penguin List, start, stop, connect user, connect root (it's dash dash space bash), help. In order to issue an lxc stop command, you must first exit the container: lxc list lxc start penguin lxc stop penguin lxc exec penguin su - lxc exec penguin -- bash lxc --help You may find it helpful to clone a container. A container must be stopped before it can be cloned: lxc copy penguin mycontainer lxc list lxc start mycontainer lxc stop mycontainer lxc exec mycontainer su - lxc exec mycontainer -- bash Example session: Alt+Ctrl+T vmc start termina lxc start penguin lxc exec penguin su - gox exit lxc stop penguin exit vmc stop termina exit
@gitaglobalschool3218
6 ай бұрын
This will just run kali within that chrome os or remove Chrome os and install Kali?
@ruthake
5 ай бұрын
This runs Kali within ChromeOS. The Linux development environment is separate from ChromeOS. Linux can be backed up and deleted at any time. Linux can be backed up in Chromebook Settings > Advanced > Developers > Linux development environment > Backup & restore > Backup Linux can be deleted in Chromebook Settings > Advanced > Developers > Linux development environment > Remove Linux can be restored from a backup file in Chromebook Settings > Advanced > Developers > Linux development environment > Backup & restore > Restore (if Linux has been deleted, the base install needs to be done first kzitem.info/news/bejne/lZiBy5WMsJGWpJg )
@gitaglobalschool3218
5 ай бұрын
@@ruthake Thanks for the reply mam. I appreciate your well explained response.
@mannyoviedo2963
19 күн бұрын
best video EVER
@Icekto
7 ай бұрын
helped alot
@user-tc6bm7ym9m
6 ай бұрын
help E: Unable to locate package kali-desktop-xfce
@ruthake
6 ай бұрын
To see if the Linux side is connected to the internet, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping Check if kali-desktop-xfce is available, if it's not, please review the install instructions from below. From a terminal: apt list kali-desktop-xfce The output should look like: kali-desktop-xfce/kali-rolling,now 2024.1.0 all ------------------------------ For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@yawbaby52
5 ай бұрын
Thanks ❤
@jakeo6323
19 күн бұрын
no network connections show, i’ve tried pinging google and doing that fix. It is not on the linux side im thinkin it’s a driver please help . 🙏
@ruthake
17 күн бұрын
Chromebook containers use bridge software to connect to the outside world, this will show as eth0. There is no direct connection between the Linux container and the Chromebook's WiFi. The Chromebook needs to be connected to the internet in order for Linux to be connected to the internet. -------------------------------- Clicking the network icon from the right side of the taskbar for enabling/disabling the network will always say "No network devices available" even if Linux is connected to the internet. -------------------------------- You can add the Network Monitor to the Panel: Right click the Panel and in the Panel sub menu, select Add New Items. From the Add New Items window, select Network Manager, and click the Add button. By default, the Network Monitor should be set to eth0 (Linux thinks it's connected to internet by ethernet). Open a browser to generate some traffic for the monitor. -------------------------------- For clarity just to confirm, this is the fix you tried? To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux
@Yestinenjoyer
24 күн бұрын
Hello After the reload at 10:27 It tells me "Some index files failed to download. They have bene ignored, or old ones used instead" please I Need help
@ruthake
23 күн бұрын
It appears Linux is not connecting to the internet. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux -------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@le_seul2079
3 ай бұрын
don't work, everything after i launch kali linux for the first time update : it was me, in her comment, you have to follow the instruction for internet
@ruthake
3 ай бұрын
Please provide the exact command you are executing along with any error messages. --------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@le_seul2079
3 ай бұрын
@@ruthake i found
@TGXNS
Ай бұрын
Same
@Westman5
7 ай бұрын
Thanks!!! This us way better than debian
@Bryan-qs1dp
Ай бұрын
When i tryed it said that the key wasnt public and kali-rolling wasnt sined so it didnt do anything with the upgrade can you help
@ruthake
Ай бұрын
It sounds like there's a typo in either the Kali software key or the repository file (sources.list). ---------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@SpeedStreets
Ай бұрын
When I try to reload synaptics packages I’m told I have a network problem how do I connect my network
@ruthake
Ай бұрын
To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux
@LindseyBennik-nr7ff
Ай бұрын
Help please! After the command at 2:37 for the downloading of the key, I get an error message. I tried it ten times and did exactly what you did. Now I can’t continue. What should I do?
@ruthake
Ай бұрын
For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn ----------------------- If you continue to have issues please copy and paste the command you executed and any error messages.
@giovannipascoli1537
17 күн бұрын
miss, i cannot connect to the internet wile im in rhe desktop :/
@ruthake
17 күн бұрын
To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux
@Zander-fm9fc
3 ай бұрын
I keep having a problem where the terminal closes at around 30 percent when upgrading
@ruthake
3 ай бұрын
It sounds like it's possibly a storage or connectivity issue. If either of the following fixes work, then you can try executing the upgrade command again. You can check the amount of storage dedicated to Linux from Chromebook Settings > About ChromeOS > under the Developers section, click Linux development environment > Disk size. If the storage is 6 GB or under, try raising it to 8 GB. ------------------------ To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux ------------------------ For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@admiral44
7 ай бұрын
Awesome video thank you so much ! I can’t figure out where I went wrong . I launch the desktop fine but when I click on synaptic to actually open it up after changing the command , my desktop just goes black instead of opening the app. Any ideas? I’ve double checked the script and just can’t figure out where I went wrong .
@admiral44
7 ай бұрын
Edit , so I right clicked on synaptic packet manager from the tool bar. And clicked on properties . From there I clicked edit and it showed a different command. I changed the command to gosyn and it no longer crashes the desktop however the pocket manager just simply doesn’t launch. In fact , when I right click on synaptic manager , the launch button is greyed out
@admiral44
7 ай бұрын
Also, not sure how much this affects it if at all. After typing the gosyn in the command my mouse cursor stayed as if I’m typing . I can still click on things like normal but the cursor no longer shows a regular mouse cursor unless I relaunch .
@admiral44
7 ай бұрын
Update: So I was able to launch it by bringing up the terminal and logging in as root . I launched it from there and everything is working now !
@deniro9747
5 ай бұрын
Sudo apt update and uppgrade does not work please help
@ruthake
5 ай бұрын
Can you please copy and paste the error message here.
@deniro9747
5 ай бұрын
@@ruthake malformed line 3 in source list /etc/apt/sources.list (type) The list of sources could not be read. :(
@ruthake
5 ай бұрын
It sounds like there's a typo in the sources.list file. Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free ------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@deniro9747
5 ай бұрын
@@ruthake im sorry im such a noob how do you delete ?
@deniro9747
5 ай бұрын
@@ruthake wait its working now, thank you for respond and help, ill Come back if somthing comes up again.
@5abiXtasy
Ай бұрын
Hey great video! I was able to get the internet working within Kali Linux. Bluetooth is not working. I have tried enabling, restarting etc. It shows "Active: inactive (dead) bluetooth service was skipped because of an unmet condition check (conditionpathisdirectory)" Perhaps Chromebook is not giving up its bluetooth?
@ruthake
Ай бұрын
Google is in the process of merging Android and ChromeOS VMs and hardware. This may provide better solutions in the future. www.androidauthority.com/chrome-os-running-on-pixel-3442496/
@ROLANDOBONA10
Ай бұрын
Hello, how can I install all the Kali tools? Since there are only a few coming, could you help me? greetings and a hug from Chile
@ruthake
Ай бұрын
I would recommend installing tools individually. Note that the Google container connects to the outside world through bridge software. All tools may not work as expected. In some cases, opening a port can help. This can be done in Chromebook Settings > About ChromeOS > Developers > Linux development environment > Port forwarding. Bridge Software: chromium.googlesource.com/chromiumos/containers/cros-container-guest-tools/ ----------------------------------- Canonical is no longer supporting LXC (this includes Ubuntu containers): discuss.linuxcontainers.org/t/important-notice-for-lxd-users-image-server/18479
@rollecorps
3 ай бұрын
good day Ruth I have a problem I don't know how to change my wifi network to bridge connection can u plss help
@ruthake
3 ай бұрын
Chromebook containers use bridge software to connect to the outside world, this will show as eth0. There is no direct connection between the Linux container and the Chromebook's WiFi. You can add the Network Monitor to the Panel: Right click the Panel and in the Panel sub menu, select Add New Items. From the Add New Items window, select Network Manager, and click the Add button. By default, the Network Monitor should be set to eth0 (Linux thinks it's connected to internet by ethernet). Open a browser to generate some traffic for the monitor.
@soyigaabiola7253
4 ай бұрын
I love your video, i was able to install the kali linux swiftly your instructions. Thank you. But a quick one, i can only see few tools to use, how can i be able to install, other tools like sniffing tools, vulnerability analysis, web application analysis? Pls i really need your help🤲🏿
@soyigaabiola7253
4 ай бұрын
Thank you very much. I have been able to install them using Google to search for the apps
@ROLANDOBONA10
Ай бұрын
Haz podido instalar otras herramientas?
@jasonaddison-b8i
Ай бұрын
hi please i have followed all the steps but when i entered the gox command for the kali desktop to appear it just gives me the dark mode but not appearing so please can you help me out? thank you.
@ruthake
Ай бұрын
If by dark mode you mean black screen: Then it is likely an issue with the go script. Please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth (if it's not a black screen then copy and paste any output here): Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & --------------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@EberthMendez
2 ай бұрын
no work for me, meaby is beacose a have a chromebook idk.... i feel fustrated
@ruthake
2 ай бұрын
If you're new to installing Linux, then I recommend starting with Debian. For your convenience I've included the Debian install instructions: Enable Linux from Chromebook Settings > search for linux > select Set up Linux development environment > click the Set up button and follow the prompts to install Linux. From Terminal app: sudo apt update -y sudo apt dist-upgrade -y sudo apt install task-lxde-desktop -y sudo apt install xserver-xephyr -y sudo apt install nano -y sudo systemctl disable lightdm sudo nano /usr/bin/gol Xephyr -br -fullscreen -resizeable :20 & sleep 5 DISPLAY=:20 startlxde & Ctrl-O, Enter, Ctrl-X sudo chmod +x /usr/bin/gol gol
@ace-fk9yb
4 ай бұрын
Thanks for this great Linux in a container option, especially for us ARM Chromebook users. Is there a way to set a default resolution in Kali? It usually starts up at 1920 x 1080, but I needed 1536 x 864 which is what I use in ChromeOS.
@ruthake
4 ай бұрын
Due to the nature of Kali running in a container, the normal methods for scaling will not work. There are two options: 1. Set the Chromebook Display size (Chromebook Settings > Device > Displays > Display size) before starting Kali. 2. Start up Xephyr with sommelier. Here's an example script (the smaller the number, the bigger the screen. The bigger the number, the smaller the screen. 2 is half size, and 0.5 is double the size): sommelier -X --scale=0.8 Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & ------------------------- For additional scaling options in Kali: The desktop icon/font size can be adjusted by right clicking inside the desktop > select Desktop Settings... > go to the Icons tab > Icon size and Use custom font size The default font size can be adjusted by going to the Menu > Settings Manager (bottom right of the Menu) > Appearance > go to the Fonts tab > Default Font
@stayskywalking
20 күн бұрын
Hey while im in kali and trying to run synaptic package manager it says authentication is required and i need a password confused on what that would be or how to solve ?
@ruthake
19 күн бұрын
From a terminal ( is the result from the whoami command): To find the user id: whoami To set the password for the user id: sudo passwd To set the root password: sudo passwd root Note, password is purposefully misspelled without "or" in it, and when you set any password, you will have to enter it in twice and it will not show what you are typing. If you forget your password, you can set the password again at any time with the sudo passwd command.
@stayskywalking
19 күн бұрын
@@ruthake thanks so much!
@qkaw
Ай бұрын
Doesn't work. It says ”line 1: Xephyr : command not found”
@ruthake
Ай бұрын
It sounds like Xephyr is not installed. From a terminal to see if Xephyr is installed: apt list xserver-xephyr This should show: xserver-xephyr/kali-rolling,now 2:21.1.12-1 amd64 [installed] If it's not installed: sudo apt update -y sudo apt install xserver-xephyr -y Verify the location of Xephyr: which Xephyr It should show: /usr/bin/Xephyr Execute gox script again: gox -------------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@DWiise
3 ай бұрын
After doing everything to a T …was working fine for a few days. Only after I did the last few steps of this video, (i.e. configuring synaptic, configuring the panel and using undercover desktop) did run into issues. Now whenever I attempt to start the terminal it goes through the usual startup but freezes on the part where it says “STARTING LINUX CONTAINER” it gives an error saying “launching vmshell failed: error starting crostini for terminal:58 (START_CONTAINER_TIMED_OUT)
@ruthake
3 ай бұрын
I would recommend shutting down Linux, shutting down the Chromebook, restart the Chromebook, put the Chromebook online, start up Linux again, and try executing the gox script. ------------------------- If that doesn't work, you can try starting up the desktop through the crosh terminal. From the ChromeOS Chrome browser: chrome-untrusted://crosh vmc start termina lxc list penguin should be in a STOPPED state. If it's not, do "lxc stop penguin" first. Once penguin is in a STOPPED state, continue with the following: lxc start penguin To log in as your user: lxc exec penguin su - To log in as root (it's dash dash space bash): lxc exec penguin -- bash ./gol.sh To shut down from the ChromeOS Chrome browser: exit (give it a moment, and press Enter if it ends with the message logout) lxc stop penguin exit vmc stop termina Close the browser.
@Crto-wl8vy
3 ай бұрын
I have a problem, when I reload the synaptic package manager, it shows an error saying "Could not download all repository indexes". What can I do? Do I need to reload it?
@ruthake
3 ай бұрын
It sounds like a connectivity issue. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux -------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@ghostkiller-ep8cd
2 ай бұрын
please help after I put in the Kali key that works, but when I try to update it with sudo apt update -y it tells me malformed line 3 in source list /etc/apt/sources.list (type) the list of sources could not be read. it says the same thing when I try to upgrade it with sudo apt full-upgrade -y. please tell me how to fix it please and thank you
@ruthake
2 ай бұрын
It sounds like there's an issue with the sources.list file. Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free --------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@ThomasShelby-sm3yu
2 ай бұрын
When in synaptic package manager it says could not download all repository indexes what should I do
@ruthake
2 ай бұрын
It sounds like the Linux side is not connecting to the internet. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux
@markknight2768
8 ай бұрын
So since I have debian installed already on the chromebook I do not need to remove debian as this will just change it over to Kali? Correct?
@ruthake
8 ай бұрын
You don't have to switch to Kali, unless you want to use Kali. In general, software that runs in Kali can be run on Debian, and vice versa. If you switch to Kali, you would need to start over.
@Atrogz
3 ай бұрын
I have a problem when I try to reload in synaptic. It says could not download all repository files. The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will ignored. Check your network connection and ensure the repository address in the preferences is correct. And then below says failed to fetch https…. Etc what do I do pls help 😅
@ruthake
3 ай бұрын
It sounds like a network issue on the Linux side. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux
@NebularyYT
3 ай бұрын
Oops i commented on the wrong video. But I just wanted to ask how do I increase the size of everything in the kali linux container bcoz I cant see anything
@ruthake
3 ай бұрын
Here's a method for enlarging the entire desktop, this has been an ongoing area of research. We've tried hundreds of combinations, don't hesitate to experiment. This method should also work for Debian. 0.5 doubles the screen size, 2 is half size, decimals can be used (ex. --scale=0.671). ruth is an example user id: sommelier -X --scale=0.5 Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & Reboot Linux and startup the desktop again for the scale to take affect. For reference this is the unmodified version of the go script with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & For a sommelier quick reference from a terminal: sommelier --help Sommelier Documentation: chromium.googlesource.com/chromiumos/platform2/+/HEAD/vm_tools/sommelier/ I have a video that goes into detail on Sommelier: kzitem.info/news/bejne/k4im1Kmap5yUZJw
@jimsimmons2674
4 ай бұрын
I have the Lenovo N23 and i could install linux but when i try to i get low on disk space warning and the slider for disk size only goes to 6.8GB?It says Linux needs at least 10gb disk space?Any suggestions?
@ruthake
4 ай бұрын
The only option is to free up storage on the Chromebook side.
@Ultron-010
4 ай бұрын
I have followed all the steps everything is set but Menu option is not showing on my device How to fix it ?
@ruthake
4 ай бұрын
To restore the XFCE Panel to it's default from the Terminal app BEFORE starting up the desktop: cd ~/.config rm -r xfce4 cd ~/.cache rm -r sessions Then reboot Linux.
@moubikoby
Ай бұрын
the network devices is not working can you halp my
@ruthake
Ай бұрын
If Linux is not connecting to the internet: To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux ---------------------------------- If you're attempting to directly access WiFi from the Linux side: The Linux development environment can't directly access WiFi: support.google.com/chromebook/thread/59406567/wireless-interface-not-appearing-in-linux-apps-in-chrome-os?hl=en You can add the Network Monitor to the Panel: Right click the Panel and in the Panel sub menu, select Add New Items. From the Add New Items window, select Network Manager, and click the Add button. By default, the Network Monitor should be set to eth0 (Linux thinks it's connected to internet by ethernet). Open a browser to generate some traffic for the monitor. You may wish to research it and see if ports need to be opened: Ports can be opened in Chromebook Settings > About ChromeOS > Developers > Linux development environment > Port forwarding
@Minion29543
Ай бұрын
I named my file gox but it won’t show says /usr/bin/gox: Line 1: Xeohry: command not found
@ruthake
Ай бұрын
It sounds like Xephyr is spelled wrong in the script. Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & --------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@Minion29543
Ай бұрын
@@ruthake thank you and that might have been me misspelling it myself. I’ll try again tonight or tomorrow when I get the chance
@Tavernkreeper
Ай бұрын
When enter gox it’s just a black screen
@ruthake
29 күн бұрын
It is likely an issue with the go script. Please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & ------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@nuryasin5431
28 күн бұрын
Hey guys, there is a problem with me when i want to use the terminal for some command like dirb, nslookup, etc. Is it because of it's simple install or another reason? Can someone tell me how to use common linux tools using this installation? Thanks....
@ruthake
27 күн бұрын
It's understandable that new users interested in security may be overwhelmed by the abundance of information. I would strongly recommend starting with the Advanced BASH-Scripting guide (install abs-guide), and then continue onto the Debian Handbook (install debian-handbook). In the handbook, the networking tools are in Chapter 10. You may wish to install info. Chromebook containers use bridge software to connect to the outside world, this will show as eth0. There is no direct connection between the Linux container and the Chromebook's WiFi. These commands often provide additional documentation: man info --help (it's dash dash help) The URL file:/// can be used with any browser. This gives an easy way to search/view PDF/HTML books. qpdfview is also an excellent PDF reader (install: qpdfview). Debian Handbook: Install: debian-handbook File location: /usr/share/doc/debian-handbook/html Debian Reference: Install: debian-reference File location: /usr/share/debian-reference Installation Guide: Search for: installation-guide File location: /usr/share/doc/installation-guide-system Maintenance Guide: Install: maint-guide File location: /usr/share/doc/maint-guide/html Reference Card: Install: debian-refcard File location: /usr/share/doc/debian-refcard Advanced BASH-Scripting Book (This one's really fun!): Install: abs-guide File location: /usr/share/doc/abs-guide/html
@nuryasin5431
24 күн бұрын
@@ruthake Thank you Ruth. I'll try Your recommendation.
@26arturmtb
2 ай бұрын
Hello! Everything works. But i cant open google and stuff, cus it says that i dont have network connection, but i do. So idk what to do
@ruthake
2 ай бұрын
To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux
@26arturmtb
2 ай бұрын
@ruthake btw can you also make a tutorial on how to run exe files on chromebook plsss
@ruthake
2 ай бұрын
I have not tested running Windows apps on ChromeOS. Wine should allow you to run .exe files. Here's an article about running Wine on a Chromebook: beebom.com/how-use-windows-10-apps-chromebook-using-wine/ You may also be interested in virtual machines: chromeunboxed.com/run-a-variety-of-virtual-machines-on-your-chromebook-with-gnome-boxes/
@pavanbaree4459
2 ай бұрын
After sudo apt install kali-defaults -y after this command its showing unable to locate package kali-defaults
@ruthake
2 ай бұрын
It sounds like it is either an issue with the network connection on the Linux side or the repository. ------------------------------ To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux ------------------------------ If the internet on the Linux side is working, then I would recommend reviewing all the instructions before the "sudo apt install kali-defaults -y" command. For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@preschoolPT
5 ай бұрын
Managed to get it to work, but could you do a tutorial on how to get sound and the WiFi to work 😊
@ruthake
5 ай бұрын
I have video dedicated to that: kzitem.info/news/bejne/1Wmb36SEs5R3n4I --------------------------------------- ALSA (Advanced Linux Sound Architecture) - Kernel based sound service. PulseAudio - A depreciated sound server. JACK (JACK Audio Connection Kit) - A depreciated sound server. PipeWire - Handles multimedia for Linux such as audio. PipeWire is replacing PulseAudio and JACK sound servers. WirePlumber - Manages PipeWire. XDG (Cross-System Group) - XDG environmental variables help programs find things like PipeWire and D-Bus. D-Bus (Desktop Bus) - An IPC (InterProcess Communications) middleware meaning it helps programs talk to each other. --------------------------------------- To fix no audio, edit the launch command of the app and prefix the Command with: env XDG_RUNTIME_DIR=/run/user/1000 For games, you may need to add /usr/games. For example, for Frozen Bubble: env XDG_RUNTIME_DIR=/run/user/1000 /usr/games/frozen-bubble Some programs may require a special feature to be enabled. You may need to check the documentation for that program. For example, /usr/games/powermanga --help shows that --sound enables sound for powermanga: env XDG_RUNTIME_DIR=/run/user/1000 /usr/games/powermanga --sound --------------------------------------- To get a working volume control, remove the greyed out volume control icon from the top Panel, edit the launch command for PulseAudio Volume Control, and then Add PulseAudio Volume Control to the top Panel. The Command for PulseAudio Volume Control should be changed to: env XDG_RUNTIME_DIR=/run/user/1000 GDK_BACKEND=x11 pavucontrol --------------------------------------- To fix no internet on the Linux side, create a new resolv.conf file (it's resolve without an 'e' on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side. The nameserver 8.8.8.8 and nameserver 8.8.4.4 are the Google DNS. From a terminal: cd /etc sudo nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, and Ctrl-X to save the file and exit nano Reboot Linux. --------------------------------------- The Kali fixes video includes examples of using other prefixes: GDK_BACKEND=x11: kzitem.info/news/bejne/xautsHylo3hinpg&list Sommelier: kzitem.info/news/bejne/k4im1Kmap5yUZJw&list
@preschoolPT
5 ай бұрын
@@ruthake all working. how ever i cant get that command neofetch to work. um....???#
@ruthake
5 ай бұрын
To see if neofetch is installed from a terminal: apt list neofetch The output should look like something like this, if it doesn't say installed, then you can install it: neofetch/stable,now 7.1.0-4 all [installed]
@UnskilledGamer691
6 ай бұрын
this is amazing how to run system in terminal :D
@bernaodiaz
2 ай бұрын
everything worked but when i enter gox the screen stay black it wont turn to kali please help
@ruthake
2 ай бұрын
It is likely an issue with the go script. Please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & -------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@bernaodiaz
2 ай бұрын
@@ruthake i copy paste your commands but it wont work
@bernaodiaz
2 ай бұрын
@@ruthake It worked may God bless you
@skerpent
6 ай бұрын
would it be possible to use this same method for arch?
@ruthake
6 ай бұрын
I don't believe the technique used for turning Debian into Kali will work for Arch. There are Debian Arch conversion scripts available, however these are not compatible with a container based system: packages.debian.org/bullseye/arch-install-scripts In the future I'll be covering containers. You can manually install a Linux Arch container: images.linuxcontainers.org/ For a Linux Arch container to be functional, it will require bridge software to connect it to ChromeOS: chromium.googlesource.com/chromiumos/containers/cros-container-guest-tools/ Chrome OS devices/Crostini Arch Wiki: wiki.archlinux.org/title/Chrome_OS_devices/Crostini
@Nyx-xl4es
2 ай бұрын
Hello, please help, i followed the steps and i tried to run Kali but it never comes up, just blank screen, yes i used the internet Please how do i fix this ?
@ruthake
2 ай бұрын
It sounds like an issue with the go script. Please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & ----------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@Nyx-xl4es
2 ай бұрын
@@ruthake yes it was, I was using the command gol instead of gox so it wasn't working I flashed my laptop because I didn't realise on time, I tried other videos which led to developer mode and flashing, I was so sad about it It worked though ! Thank you so much !! You just gained a new follower ! ❤️
@bernaodiaz
2 ай бұрын
@@Nyx-xl4es i have got evrything gox is working but if i press enter it wont work it for others there is a kali display but mine just shows a black site without nothing
@user-oj4he9zz5i
7 ай бұрын
Hello fist I opened terminal Next sudo apt install nano-y After dpkg was interrupted you must manually run sudo dpkg configure a to correct the problem So how to fix it this command? Can you explain it ?
@ruthake
7 ай бұрын
Is the rest of this command asking you: sudo dpkg --configure -a If so, run that command from the terminal. If the command didn't execute (sudo apt install nano-y), there needs to be a space between nano and -y.
@forurinformation985
7 ай бұрын
hello your content is so good i did all good but problem came in icon and fontz size how i can fix plz tell me
@ruthake
7 ай бұрын
The screen resolution can be lowered to make everything bigger by going to Chromebook Settings > Device > Displays > Display size The desktop icon/font size can be adjusted by right clicking inside the desktop > select Desktop Settings... > go to the Icons tab > Icon size and Use custom font size The default font size can be adjusting by going to the Menu > Settings Manager (bottom right of the Menu) > Appearance > go to the Fonts tab > Default Font
@forurinformation985
7 ай бұрын
@@ruthake thx
@imagine303
7 ай бұрын
it gives me Fatal server error: (EE) Server is already active for display 20 If this server is no longer running, remove /tmp/.X20-lock and start again. (EE)
@ruthake
7 ай бұрын
I recommend removing the lock file and then try starting the desktop again: sudo rm /tmp/.X20-lock gox
@DadBodRocks
19 күн бұрын
how do I fix the desktop gui not showing up after running the script
@ruthake
17 күн бұрын
It is likely an issue with the go script. Please copy and paste your go script (4:30) and any error messages if there are any. Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & -------------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@DadBodRocks
13 күн бұрын
@@ruthake thank you I figured it out, for some reason I had to.restart manually and then I was a little impatient as well
@kaizerote
2 ай бұрын
Gox didnt run. Black screen, Kali did not run😢
@ruthake
2 ай бұрын
It is likely an issue with the go script. Please copy and paste your go script (4:30). Here's the go script for quick reference with the example user id being ruth: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & ----------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@CredereCleardotcom
2 ай бұрын
Did everything but when I type gox from the terminal I get following error, please help :( /usr/bin/gox: line 1: Xephyr: command not found
@ruthake
2 ай бұрын
It sounds like Xephyr is not installed. From a terminal to see if Xephyr is installed: apt list xserver-xephyr This should show: xserver-xephyr/kali-rolling,now 2:21.1.12-1 amd64 [installed] If it's not installed: sudo apt update -y sudo apt install xserver-xephyr -y Verify the location of Xephyr: which Xephyr It should show: /usr/bin/Xephyr Execute gox script again: gox -------------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@ObviousNeutron
Ай бұрын
i tried doing this and it broke my linux container
@ruthake
Ай бұрын
Please copy and paste the command you are trying to execute and any messages here. ------------------------------ If the terminal won't start, you can first try shutting down Linux, shut down the Chromebook, restart the Chromebook, put it online, and then open the Terminal. If that doesn't work, you can try starting up the desktop through the crosh terminal. From the ChromeOS Chrome browser: chrome-untrusted://crosh vmc start termina lxc list lxc start penguin To log in as your user: lxc exec penguin su - To log in as root (it's dash dash space bash): lxc exec penguin -- bash gox To shut down from the ChromeOS Chrome browser: exit (give it a moment, and press Enter if it ends with the message logout) lxc stop penguin exit vmc stop termina Close the browser. ------------------------------ If there's an issue with installing, then the Linux side may not be connecting to the internet. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux ------------------------------ For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@702johnny
8 ай бұрын
Mint next?
@ruthake
8 ай бұрын
I don't believe the technique used for turning Debian into Kali will work for Mint. You may be interested in researching LMDE: www.linuxmint.com/download_lmde.php In the future I'll be covering containers. You can manually install a Linux Mint container: us.lxd.images.canonical.com/ For a Linux Mint container to be functional, it will require bridge software to connect it to ChromeOS: chromium.googlesource.com/chromiumos/containers/cros-container-guest-tools/
@702johnny
8 ай бұрын
@@ruthake Awesome. Love your coverage on Linux on chromebooks. Makes the chromebooks so much more useful.
@Emeraldjack-rd5bx
3 ай бұрын
what do i do if the directory /ect/apt/ dose not exist?
@ruthake
3 ай бұрын
It sounds like you mean /etc/apt. From a terminal: cd / ls cd etc ls -d apt cd apt ls pwd
@Emeraldjack-rd5bx
3 ай бұрын
@@ruthake thank u I will try again
@penguinsforlease2921
Ай бұрын
Honestly i got this to work on this same chrome book multiple times a month or two ago but ive powerwashed 3 times today and copied everything exactly. Id say 30% of the way thru the full-upgrade my terminal crashes and i am unable to relaynch into my terminal unless i close linux via icon as in shut down. I feel as this has caused my error as to when i try to run gox it stalls and all i get is a black screen. On top of that attempting to install xfce returns with an error that i did not have before stating that it was missing dependences.
@penguinsforlease2921
Ай бұрын
Dpkg was interrupted when attempting to re sudo apt full-upgrade -y
@penguinsforlease2921
Ай бұрын
I run Sudo dpkg --configure -a and it spits out removing obsolete conffile polkit
@penguinsforlease2921
Ай бұрын
Re running the full upgrade hopefully it works
@ruthake
Ай бұрын
If you continue to have issues, please comment again. Linux can be completely removed without powerwashing the Chromebook from the Linux development environment settings, click the Remove button. ------------------------------ One of the most common issues with Kali is the internet on the Linux side going out. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux Then retry the failed command. ------------------------------ Alternatively, if the Terminal app crashes, you can try starting up the desktop through the crosh terminal. Before starting the crosh terminal, shut down Linux (right click the Terminal app in the bottom shelf and select Shut down Linux), shut down the Chromebook, start the Chromebook back up, and put the Chromebook online. Then from the ChromeOS Chrome browser: chrome-untrusted://crosh vmc start termina lxc list lxc start penguin To log in as your user: lxc exec penguin su - To log in as root (it's dash dash space bash): lxc exec penguin -- bash gox To shut down from the ChromeOS Chrome browser: exit (give it a moment, and press Enter if it ends with the message logout) lxc stop penguin exit vmc stop termina Close the browser. ------------------------------ For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@penguinsforlease2921
Ай бұрын
@@ruthake i appreciate you taking the time to respond :) not a lot of people do that. I'm gonna remove the Linux Environment and try to use the terminal thru crosh. For some reason when attempting to sudo apt install kali-xfce it returns with a dependency error witch I did not encounter before. I'll give the crosh terminal a whirl when I get home.
@user-qd5zn5lj6w
2 ай бұрын
Neofetch failed to install!!!
@ruthake
2 ай бұрын
It sounds like the Linux side is not connecting to the internet. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux ------------------------ If there have been any updates in the repository, then you may need to click on the Reload button (top left) in Synaptic.
@brauliovazquez1951
4 ай бұрын
Hey how can I install supplementary tools ?
@ruthake
3 ай бұрын
I recommend using the Synaptic Package Manager: gosyn Script: 6:48 Configure Synaptic: 9:08 Using Synaptic: 10:11 You may also be interested in my Kali Fixes video: kzitem.info/news/bejne/1Wmb36SEs5R3n4I
@Alastorvr-coil
3 ай бұрын
How much storage does it take
@ruthake
3 ай бұрын
Less than 6GB.
@ibrakabak8003
26 күн бұрын
The gox command didn’t work to start kali . Can you help me
@ruthake
23 күн бұрын
Please copy and paste any error messages here. ------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@ibrakabak8003
23 күн бұрын
@@ruthake please it’s worked. My Kali Linux is working perfectly. But do u organize class on how to use Kali Linux? Because am new with this but I want to learn
@ruthake
21 күн бұрын
Most things that run on Kali will run on Debian and vice versa which means most Debian documentation will be applicable to Kali. Chromebook containers use bridge software to connect to the outside world, this will show as eth0. There is no direct connection between the Linux container and the Chromebook's WiFi. These commands often provide additional documentation from a terminal: man info --help (it's dash dash help) HTML/PDF Documentation: The URL file:/// can be used with any browser. This gives an easy way to search/view PDF/HTML books. qpdfview is also an excellent PDF reader (install: qpdfview). Debian Handbook: Install: debian-handbook File location: /usr/share/doc/debian-handbook/html Debian Reference: Install: debian-reference File location: /usr/share/debian-reference Installation Guide: Search for: installation-guide File location: /usr/share/doc/installation-guide-system Maintenance Guide: Install: maint-guide File location: /usr/share/doc/maint-guide/html Reference Card: Install: debian-refcard File location: /usr/share/doc/debian-refcard Advanced BASH-Scripting Book (This one's really fun!): Install: abs-guide File location: /usr/share/doc/abs-guide/html ---------------------------- Google is in the process of merging Android and ChromeOS VMs and hardware. This may provide better solutions in the future. www.androidauthority.com/chrome-os-running-on-pixel-3442496/ For everything Chrome related: www.chromium.org/chromium-projects/ ---------------------------- Security is not my area of expertise, but I think you may enjoy the SecurityFWD channel with Kody and the Naomi Brockwell TV channel. "SecurityFWD shows the latest security tools, amazing projects, and keeps you on the edge of what's possible in security today." SecurityFWD Channel (Current): www.youtube.com/@SecurityFWD Original Channel: www.youtube.com/@NullByteWHT What happened to Nullbyte? kzitem.info/news/bejne/loOpuqFjr2KqnoY Naomi Brockwell TV www.youtube.com/@NaomiBrockwellTV
@ibrakabak8003
21 күн бұрын
@@ruthake Thank you
@hxndrikk_
5 ай бұрын
neoflech is not working at me
@ruthake
5 ай бұрын
To see if neofetch is installed from a terminal: apt list neofetch The output should look like something like this, if it doesn't say installed, then you can install it: neofetch/stable,now 7.1.0-4 all [installed]
@ChrisDemesmin
2 ай бұрын
when i put Download Kali software key in linux it tells me wget: invalid option -- '0' usage: wget [OPTION]... [URL]... I tried the help option but that doesn't help. you you have an alternative code for Kali on linux?
@ruthake
2 ай бұрын
The software key command should have dash capital O with no spaces in between: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc ------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@ChrisDemesmin
2 ай бұрын
@@ruthake thanks ima going input that now. I’ll let you know how that goes after
@ChrisDemesmin
2 ай бұрын
@@ruthake you truly are brilliant, your update worked perfectly. Thanks!
@ChrisDemesmin
2 ай бұрын
@@ruthake when got to the end and put in gox the kali lunix window shows up i wait about 10mins and it just stayed dark there was no tool bar that came up as it showed from your example, so i tried following the steps from the link it showed me but all i notice was that it was asking for me to update the kali lunix software. after that i tried rerunning it again and now it saying i have to remove /tmp/.X20-lock and start again. how do i do that since im very new to this?
@ChrisDemesmin
2 ай бұрын
@ruthake i can still lunch synaptic package manager by using it on penguin i was just a bit concern that everything just didnt play accordingly
@NogiPhp
Ай бұрын
I couldn't install the software
@ruthake
Ай бұрын
It sounds like the Linux side is not connecting to the internet. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux ---------------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@NogiPhp
Ай бұрын
@@ruthake It worked, thanks for the help, I'm a little new in this area so I still don't know how to solve a problem like this very well. thank you again
@Ihavenobrainlol2
8 ай бұрын
I followed along with the tutorial but when I try to run kali by entering gox it wont run
resizeable is missing a dash. It should look like: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u dhdh2k DISPLAY=:20 startxfce4 &> /dev/null & The script needs to also be executable: sudo chmod +x /usr/bin/gox
@Ihavenobrainlol2
8 ай бұрын
@@ruthake It worked thank you 💛
@gertrudekristineagena9197
2 ай бұрын
how to uninstall?
@ruthake
2 ай бұрын
Linux can be deleted in Chromebook Settings > About ChromeOS > Developers > Linux development environment > Remove
@user-hv3bq2fk6w
6 ай бұрын
Failed to dowload neofetch 10:35
@ruthake
6 ай бұрын
Can you copy and paste the error here? To make sure the internet is working on the Linux side, try opening a browser and go to the Kali website. You can also check the sources.list file. From a terminal: cat /etc/apt/sources.list Everything should be commented out (lines should start with #), except for the last line which should be: deb http.kali.org/kali kali-rolling main contrib non-free You may want to try closing Synaptic, and from a terminal: sudo apt update -y sudo apt dist-upgrade -y Then try starting Synaptic and reloading (Reload button at top left). You can still use apt to install software: sudo apt install neofetch -y ---------------------------------------- If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano
@ozcanarikan5301
5 ай бұрын
Hi, I am having trouble when I try to execute gox script. It gives error `No protocol specified. Xephyr cannot open host display. Is Display set?` Can you help me to fix this?
@ruthake
5 ай бұрын
I would recommend shutting down Linux, shutting down the Chromebook, restart the Chromebook, put the Chromebook online, start up Linux again, and try executing the gox script. If that doesn't work, it's likely an issue with the go script. For your convenience I've included the complete install instructions. If you continue to have an issue, please copy and paste your go script (4:30): --------------------------------- This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@abcdeath4951
8 ай бұрын
how fix audio
@ruthake
8 ай бұрын
I recommend prefixing the launch command of a program you are trying to run with the following: env XDG_RUNTIME_DIR=/run/user/1000 For games, you will need to add /usr/games. For example, for Frozen Bubble: env XDG_RUNTIME_DIR=/run/user/1000 /usr/games/frozen-bubble Some programs may require a special feature to be enabled. You will need to check the documentation for that program. For example, dash dash sound enables sound for Powermanga: env XDG_RUNTIME_DIR=/run/user/1000 /usr/games/powermanga --sound I'll be making another video that covers some Kali related issues.
@rollecorps
8 ай бұрын
I need password i dont know it i need it for root😢 so i can use reaver airckmng comand😢😢😢
@ruthake
8 ай бұрын
To set the root password from a terminal: sudo passwd root
@rollecorps
8 ай бұрын
@@ruthake tysm omg hr the best
@DannyDeBaere
2 ай бұрын
cgroupsv1 " tainted " kernel...
@ruthake
2 ай бұрын
Are you able to start the desktop? Are you using Kali XFCE? Linux distros are not intended to be run from containers. It's normal to receive all types of miscellaneous errors and warnings. If your system appears to be working and you wish to mute the error messages. You can mute a line as shown below with "&> /dev/null" . This is the current script we've been using for Kali: Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u ruth DISPLAY=:20 startxfce4 &> /dev/null & ------------------------------ Some Desktops can peacefully coexist and even run at the same time, use a different DISPLAY id if you intend to run them at the same time. The following desktops were tested with Debian 12: XFCE Desktop: Install: task-xfce-desktop Create the file: /usr/bin/gox Xephyr -br -fullscreen -resizeable :40 & sleep 5 sudo -u DISPLAY=:40 startxfce4 & The following desktops were tested with Debian 11. KDE Desktop: Install: task-kde-desktop Create the file: /usr/bin/gok Xephyr -br -fullscreen -resizeable :40 & sleep 5 DISPLAY=:40 startplasma-x11 & GNOME Desktop: Install: task-gnome-desktop, mutter In the script below, the ChromeOS display size is 1518x853. 33 has been subtracted from the height to compensate for the top bar. You may have to experiment with the height. The display size can be found in Chromebook Settings > Device > Displays > Display size. Create the file: /usr/bin/gog export MUTTER_DEBUG_DUMMY_MODE_SPECS=1518x820 sleep 5 gnome-shell --nested --wayland &> /dev/null & IceWM Desktop: Install: icewm Create the file: /usr/bin/goice Xephyr -br -fullscreen -resizeable :40 & sleep 5 DISPLAY=:40 icewm-session & Menu → Settings → Themes → NanoBlue TWM Desktop: Install: twm, suckless-tools, nitrogen Create the file: /usr/bin/got Xephyr -br -fullscreen -resizeable :40 & sleep 5 DISPLAY=:40 twm &> /dev/null & DISPLAY=:40 nitrogen --restore &> /dev/null & Create the run command file TWMRC for TWM configuration: ~/.twmrc ShowIconManager IconifyByUnmapping Button3 = : root : ! “dmenu_run -fn ‘Mono-20’ &> /dev/null &” Mouse is invisible until first app opens. Right click the desktop to run Dmenu. Run Nitrogen first to setup the wallpaper. To shut down TWM, do killall Xephyr in Chromebook Terminal and then do a regular Linux shutdown
@DannyDeBaere
2 ай бұрын
@@ruthake yes, I did the exact installation as presented here this vid...xfce desktop environment. Then I used synaptic to install tools but 1 installation gave broken packages --fix. Unsuccesfull as I cannot list them -8 - with the filter... Also firefox crashes...
@DannyDeBaere
2 ай бұрын
Foynd my error, fixed it, thank you@@ruthake
@ruthake
Ай бұрын
Sorry for the late reply. Linux may not be connecting to the internet. To confirm the network is down on the Linux side, try pinging Google from a terminal: ping www.google.com Ctrl-C to stop the ping If there is no internet on the Linux side, create a new resolv.conf file (it's resolve without an e on the end). After creating the file, reboot Linux. Linux may recreate the file after rebooting, that's normal. This should restore internet on the Linux side: cd /etc mv resolv.conf resolv.bak nano resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 Ctrl-O, Enter, Ctrl-X to save the file and exit nano Reboot Linux ----------------------------- For Synaptic errors, Synaptic will generally provide the command to resolve the problem. The following command is the most common fix (it's sudo space dpkg space dash dash configure space dash a): sudo dpkg --configure -a If the above command works, I would recommend doing: sudo apt update -y sudo apt dist-upgrade -y ----------------------------- For Firefox, I recommend launching it from a terminal and copy and paste any messages here. ----------------------------- For reference, I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
@ManuelMute
2 ай бұрын
hello ruth :) , tengo un errror al ejecutar el script gox ( osea lanzar el escritorio) A continuacion el error : @penguin: -$ gox /usr/bin/gox: line 1: xephyr : command no found @penguin: -$ ;( espero tu pronta respuesta //// excelente canal Ruth !!!!!
@ruthake
2 ай бұрын
Linux is case sensitive, so Xephyr needs to be spelled with a capital X. ----------------------------- From a terminal to confirm Xephyr is installed: apt list xserver-xephyr This should show: xserver-xephyr/kali-rolling,now 2:21.1.12-1 amd64 [installed] Verify the location of Xephyr: which Xephyr It should show: /usr/bin/Xephyr ----------------------------- For your convenience I've included the complete instructions. This procedure requires a fresh Linux install on a Chromebook, which installs a base Debian container which we transform into Kali. 1. Base Install: kzitem.info/news/bejne/lZiBy5WMsJGWpJg 2. Install Kali: kzitem.info/news/bejne/pKZ9y3eLbZd4ZaQ&lc=Ugwo_ICwIfUItHYJiet4AaABAg Here are the complete instructions: Install nano from a terminal: sudo apt install nano -y Delete everything in the repository source file and add the following line: sudo nano /etc/apt/sources.list deb http.kali.org/kali kali-rolling main contrib non-free Download Kali software key: sudo wget archive.kali.org/archive-key.asc -O /etc/apt/trusted.gpg.d/kali-archive-keyring.asc Update system: sudo apt update -y sudo apt full-upgrade -y Install software: sudo apt install kali-defaults -y sudo apt install kali-desktop-xfce -y sudo apt install synaptic -y sudo apt install xserver-xephyr -y Create gox script: sudo nano /usr/bin/gox Xephyr -br -fullscreen -resizeable :20 & sleep 5 sudo -u DISPLAY=:20 startxfce4 &> /dev/null & Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gox script executable: sudo chmod +x /usr/bin/gox Create gosyn script (may no longer be necessary, use only if needed): sudo nano /usr/bin/gosyn xhost + && sudo synaptic && xhost - Ctrl-O, Enter, Ctrl-X to save the file and exit nano. Make gosyn executable: sudo chmod +x /usr/bin/gosyn Shut down Linux, shut down Chromebook, and then restart Chromebook and start up Linux. Then execute gox script: gox Change launch command for Synaptic Package Manager to: gosyn
Пікірлер: 234