Thank you so much for this video! Mine "is stuck real good" too.
@rc5566
Жыл бұрын
Good video. Thanks. I like the way you broke the bead. I found it easier to put the valve stem through the hole in the wheel first and to clamp it in place with vise grip pliers while inserting the rest of the tube. By the way if the tire will hold air long enough, it's best to check the leak points before getting started by using soapy water. If any leaks are due to nails, screws or other sharp objects, remove them before installing a tube.
@justthechorus3374
3 жыл бұрын
Thanks John. You gave me the confidence to do this and I did it in less 5 minutes although I managed to lose the stem thinking I had enough air in the tube. Still works fine though.
@jwlivingston1
2 жыл бұрын
Glad it helped
@14hubbajo
3 жыл бұрын
Good video. I did the same thing after I couldn’t get the wheel unstuck.
@kevinbalcom1696
2 жыл бұрын
? ain't that how it goes ? "can't find my needle nose pliers" - Thanx For The How To -
@reiroldan9744
3 жыл бұрын
Thank you makes it easier now
@jwlivingston1
2 жыл бұрын
Glad to hear it!
@ds1755
3 жыл бұрын
Great “How not to” video.
@jwlivingston1
3 жыл бұрын
After touching hammering PB Blaster, and the wheel won't come off, show us your how to
@ds1755
3 жыл бұрын
@@jwlivingston1 to get the wheel off, just angle iron, 3 bolts, 2 nuts. Line them up with the 2 holes on the wheel. Take the third bolt line it up with axle, crank away with your home made puller. Wheel will come right off every time. Thank me later.
@jwlivingston1
3 жыл бұрын
Thought about that but that would have probably bent the rim, and since all I was going to do was place a tube inside the tire, I didn't need to go buy another 20 -50 tool for this one 10 dollar tube inserttion
@roseymalino9855
Жыл бұрын
The shortcoming of doing this supposes the tire is not punctured and doesn't have a problem which will compromise the inner tube. e.g., I had a tire with a slow leak caused by a needle barely protruding through the casing but just enough to puncture the tube.
@jwlivingston1
Жыл бұрын
It was an old tire which would not hold air. A better option may have been to the junk yard to buy a used tire. Because I wasn't about to put a 50 dollar new tire on an old mower like this.
Пікірлер: 15