I had a few questions about tankless heaters, so I figured I would video one. This is the most efficent way to heat water, it will save you the most money over electric or gas type tank heaters. There are many different brands on the market, but they basically work about the same. Water passes through a heat exchanger and very high BTU's heat it at a very fast pase.
Rinnai is the major brand that I have installed and its the one that I trust the most for its reliability, efficienty and customer service.
( I AM NOT BE COMPENSATEN FOR INDORSING THIS PRODUCT)
Rinnai's web site Rinnai.US
valve kit Webstone E-X-P E2 3/4"
Venting UbBink 14" through wall kit
Rinnai # 6.5LSI
Flushing procedure.
Turn off power and both hot and cold water valves on valve kit.
Fill 5 gallon bucket with white vineger.
connect pump with two hoses from bucket to valve on cold water side of valve kit.
connect a 6' hose from hot side of valve kit back into bucket.
Let pump run for 30 to 40 minutes.
This flushing should be done once per year to maintain the life and efficenty of a tankless heater.
If you have a trankless heater and dont feel comfortable doing this flushing procedure, contact your area tankless installer or you can go onto your brands web site to get a list of qualified service providers.
If you have any questions I will be more the happy to answer them for you.
You can go onto my Instagram page michaellatronico to see other installs.
Thanks for watching MIke
Негізгі бет Фильм және анимация Install of a Rinnai tankless water heater.
Пікірлер: 135