Thank you so much! I was stuck trying to get them to run at the same time and didn't realize I had to create a new network before adjusting the adapters.
@GDNetworkingNewbie
Жыл бұрын
Great to hear! Thanks for your comment
@lipcanski
6 ай бұрын
Thanks bro, i was stuck for 4 days with this network configuration, thank you so much
@GDNetworkingNewbie
6 ай бұрын
Glad I could help
@drinkinginparadise
2 жыл бұрын
Thank you so very much for your detailed explanation bro. It means the world to me. U ROCK!!!
@GDNetworkingNewbie
2 жыл бұрын
Thank you very much for your encouraging comment ♥♥
@abhishekgorde9497
2 жыл бұрын
Its really amazing. You explained every single things. Thank you for it and make other video like this.
@GDNetworkingNewbie
2 жыл бұрын
Thank you, I will
@omrastogi1
2 жыл бұрын
You Solved my big issue I was unable to solve this for a long time after lots of try But your video solved this 👍 Thank you so much dear
@GDNetworkingNewbie
2 жыл бұрын
Glad . thanks for your comment
@ruslanov6758
Жыл бұрын
Great job man 👍 was very useful, keep going
@GDNetworkingNewbie
Жыл бұрын
Thank you for your comment
@harambe4628
Жыл бұрын
Thank you sir for this wonderful tutorial. You earned a subscriber.
@GDNetworkingNewbie
Жыл бұрын
Awesome, thank you!
@ferasalfarsi897
2 жыл бұрын
Thank you my friend. your video is very helpful.
@GDNetworkingNewbie
2 жыл бұрын
Glad to hear that - Thanks for your comments
@ssnjs5709
11 ай бұрын
Thank you very much for the beneficial video!
@GDNetworkingNewbie
10 ай бұрын
Glad it was helpful!
@jbak2935
Жыл бұрын
Perfect video, thank you so much.
@GDNetworkingNewbie
Жыл бұрын
Glad it was helpful!
@martinngere9475
2 жыл бұрын
This was very helpful 👍
@GDNetworkingNewbie
2 жыл бұрын
Glad it was helpful!
@bbyt07
Жыл бұрын
YOU ARE AMAZING BRO LIFE SAVER
@GDNetworkingNewbie
Жыл бұрын
So nice of you :)
@mohammadazam543
4 ай бұрын
I think the mode should be Host-only and not NAT networking as it exposes the setup to the internet.
@GDNetworkingNewbie
4 ай бұрын
Bridge Networking would be the safest option. kzitem.info/news/bejne/qXef16hmopmAhoY
@arun9030937175
Жыл бұрын
Thank you so much for your valuable time and info..this is the best video for the installation
@GDNetworkingNewbie
Жыл бұрын
So nice of you
@ericaz2084
9 ай бұрын
Great video. Thanks for solving my connecting issue!
@GDNetworkingNewbie
9 ай бұрын
Glad it helped!
@poremich
Жыл бұрын
Can you please make the same video but on VMWare?
@GDNetworkingNewbie
Жыл бұрын
This video covers VMware connecting two machines -Kali and Windows but you can use any machine you like instead of Windows in this setup kzitem.info/news/bejne/tamfyY1-nHZlqKg
@uutughaolami5246
5 ай бұрын
Thank You 😊
@GDNetworkingNewbie
5 ай бұрын
You're welcome 😊
@ryansamra5
Жыл бұрын
Thank you for this great video :)
@GDNetworkingNewbie
Жыл бұрын
Glad you liked it!
@athirapb1302
11 күн бұрын
Thank you
@GDNetworkingNewbie
9 күн бұрын
You are welcome
@CazaCometas
11 ай бұрын
Hello. I need some help. The VMDK file gets zipped still after extracting it. I've tried 7zip and winzip. I cannot make it to work.
@GDNetworkingNewbie
10 ай бұрын
I think, when you are writing VMDK it means you have already extracted it.
@ibrahim9322
6 ай бұрын
thank you so much!!
@GDNetworkingNewbie
6 ай бұрын
Glad it helped!
@syamsarilsyamsa9211
Жыл бұрын
GOOD JOB SIR
@GDNetworkingNewbie
Жыл бұрын
Thank you Sir for your encouraging comment
@racare3615
20 күн бұрын
Thanks so much!! it there any way to block external access to the metasploitable VM? I guess that since it is a VM to be exploited, many people from outside could do it...
@kalam2495
9 ай бұрын
Thank you bro for helping me
@GDNetworkingNewbie
9 ай бұрын
Happy to help
@AyeMarieee
8 ай бұрын
If you don't have 7-Zip downloaded make sure you get it
@GDNetworkingNewbie
8 ай бұрын
Thank you for your useful suggestion.
@EbbsClifton33
Жыл бұрын
The downloads form kali-org doesnt contain the .ova file anymore.. where can I find it?
@GDNetworkingNewbie
Жыл бұрын
www.kali.org/get-kali/#kali-virtual-machines
@RahulSharma-jv7rj
7 ай бұрын
bro which version of vm you are using, in 7.1 I am unable to set nat network..please help
@GDNetworkingNewbie
7 ай бұрын
Click on the VM, click settings, click Network, Select Adapter 1, Select Attached to: Select NAT
@dominicagyili6662
Жыл бұрын
Thanks man! Worked
@GDNetworkingNewbie
Жыл бұрын
Glad it helped
@lescarydogappears8609
2 жыл бұрын
Thanks you sir.
@GDNetworkingNewbie
2 жыл бұрын
So nice of you
@parigarg7915
5 ай бұрын
Thanks bro this video is very helpful. I'm stuck at bridging the VMs at 16:02 when you open preferences -> network in my VM it does not have network option. Please help resolve this..
@GDNetworkingNewbie
5 ай бұрын
Right click on a VM (for example, Kali), select setting -> Network -> Adapter 1 Choose the type of network you want to create from the "Attached to" dropdown menu, for example, select NAT Network Repeat the steps for Metasploitable 2
@shaikafrid
Жыл бұрын
thanque sir
@GDNetworkingNewbie
Жыл бұрын
Thank you Saik
@VozdOfUsce
2 жыл бұрын
Well done bro (:
@GDNetworkingNewbie
2 жыл бұрын
Thanks for the visit
@Greenhatnetwork
2 жыл бұрын
Thanks uh lot bro,
@GDNetworkingNewbie
2 жыл бұрын
Thank you too
@omrastogi1
2 жыл бұрын
Bother When I start Metasploitable in Virtual Box 2 ERRORS are Showing (1) " MP-BIOS bug: 8254 timer not connected to IO-APIC (2) Kernel panic - not syncing: IO-APIC + timer doesn't work ! Boot with apic=debug and send a report. Then try booting with the 'noapic' option Please help to solve it if you can !
@GDNetworkingNewbie
2 жыл бұрын
I am not so sure, sorry for that.
@Jonnie_Darko
Жыл бұрын
Thank you!
@GDNetworkingNewbie
Жыл бұрын
You're welcome!
@capoierafan
Жыл бұрын
hi im doing a dissertation on proferming a commercial firewall on metaspoilatable 2 using linux, do i have to have 3 machines ? 1 is kali 2 is firewall 3 metasp ?
@GDNetworkingNewbie
Жыл бұрын
Metasploitable is already a vulnerable machine, you can install some firewall on that machine or you can have some third machine with some firewall installed on it
@hanumabihari178
11 ай бұрын
Awesome job!!! Love it
@GDNetworkingNewbie
10 ай бұрын
Thank you for your comment
@user-rh4sy6mo1g
Жыл бұрын
Sir I am unable to click the button of enable network adapter
@GDNetworkingNewbie
Жыл бұрын
I sent you a message and hope that your problem has been solved.
@tutidetudo
Жыл бұрын
Gartidao meu amigo ganhou um inscrito
@GDNetworkingNewbie
Жыл бұрын
:)
@noorazizi1599
2 жыл бұрын
Can we install Metasploitable 2 in Parallel for the M1 machine? If you could, please help me.
@GDNetworkingNewbie
2 жыл бұрын
I am sorry, I could not get your question, what do you mean by "in parallel for the M1 machine"?
@prathamrajgor
2 жыл бұрын
When i ping both machines with each other's IP they are replying but when i try to establish a reverse shelll connection it gets stuck on "command shell session opened"
@GDNetworkingNewbie
2 жыл бұрын
It would be difficult to figure out the problem but I also have video on the same topic, if you like then follow the same steps, hopefully, you will get the required reverse shell kzitem.info/news/bejne/umqXvH17oKB7noo
@digikaininja5
11 ай бұрын
sir at 10.32 as you have networks displayed, its not showing on my system. Also is it necessary to change the IP address, Cant we use 10.0.2.15 as default settings? and do we have to name both ips different for both machines? Its been extremely tiring mentally to download this vulnerable meta2 and then to link nit to kalilinux.
@GDNetworkingNewbie
10 ай бұрын
Maybe I am not clear about your question but at 10:32 the VirtualBox should show Network option. IP address needs to be different on both VM
@thomasehrola7871
6 ай бұрын
@@GDNetworkingNewbie I had a similar issue but for VirtualBox version 7.0 you click tools, then network appears as a drop down menu and you just need to click the tab for NAT Networks but everything else still applies and works as shown in the video. Thanks for all the help!
@GDNetworkingNewbie
5 ай бұрын
Thank you very much for sharing your experience. @@thomasehrola7871
@karthikr4183
Жыл бұрын
Do I need ethernet or dongle to access Metasploitable or can I do it using my personal wifi? I am getting an ip when I start metasploit but when I use it in my OS outside virtualbox i.e windows using Chrome or edge, it shows unable to connect.
@GDNetworkingNewbie
Жыл бұрын
Whatever you use but both the machines should be able to reach each other (ping) if they are not connected then the tool may not work.
@karthikr4183
Жыл бұрын
@@GDNetworkingNewbie Thanks for the Replay Sir. I got it now.
@GDNetworkingNewbie
Жыл бұрын
@@karthikr4183 Happy to know this and thanks for sharing your experience
@zulfi1
6 ай бұрын
Great work! I'm encountering an issue with my Metasploit 2 VM. After configuring the network adapter to bridged mode, it's assigned an IPv6 address but not an IPv4 address from the 192.168.1.0/24 range. I attempted to resolve this by browsing for solutions and found many similar issues. Most suggestions involved changing the network settings to 'host,' which did resolve the problem, but the IP address is different and not from the 192 range. I'm trying to replicate your method but haven't succeeded yet. Any solution.
@GDNetworkingNewbie
6 ай бұрын
Have you verified the IP addresses being used by DHCP at 10:56?
@tonton1158
2 жыл бұрын
I got "No working leases in persistent database" when i try the command "sudo dhclient" can you help me plzz?
@GDNetworkingNewbie
2 жыл бұрын
Can you please check your DHCP settings in your VMWare
@tonton1158
2 жыл бұрын
@@GDNetworkingNewbie it works
@kdvhub
Жыл бұрын
In virtual box you selected File-> preferences and Network but i dont get any option for Network can you help... And also im using mobile hotspot as internet for my work can it be useful
@GDNetworkingNewbie
Жыл бұрын
select your VM, hit Settings and go to the Network section in the VM settings window. see four adapter tabs. One virtual network adapter is enabled by default after virtual machine creation. You can tick the “Enable Network Adapter” checkbox to enable the adapter
@AlexZeBeast
Жыл бұрын
Great, thank you.
@GDNetworkingNewbie
Жыл бұрын
Glad it was helpful!
@ismailsongadhiya007
2 ай бұрын
Which ip address I have to add in network settings while creating a NAT network? I'm adding my local machine ip but it is showing an error like "the specified address is longer than the specified prefix" Plzz help me how to solve this problem
@GDNetworkingNewbie
2 ай бұрын
I don't have the exact idea but you can configure DHCP with 192.168.10.0/24 subnet, I hope it will solve the issue
@ismailsongadhiya007
2 ай бұрын
@@GDNetworkingNewbie it accepts but when I write ifcomfig in both linux and metasploit it will not showing me the ip v4
@TraugottSandmeyer49
Жыл бұрын
Bro why both doesn't have same address? I have seen in udemy courses that both have same address
@GDNetworkingNewbie
Жыл бұрын
These two virtual machines are on a network and two machines on a single network (subnet) cannot have the same IP address.
@TraugottSandmeyer49
Жыл бұрын
@@GDNetworkingNewbie ok
@yahayaogirima3574
Жыл бұрын
Very impression was stuck too but now i move on .
@GDNetworkingNewbie
Жыл бұрын
Thanks for sharing your experience - glad it helped
@foreverstrive2197
2 жыл бұрын
Great video. What if my kali machine IP address doesn't update?
@GDNetworkingNewbie
2 жыл бұрын
If you have enabled DHCP then it should get an IP address automatically, also try to use the command sudo dhclient to request for an IP address from DHCP
@RanjitJha28
Жыл бұрын
Thanks a lot man!!
@GDNetworkingNewbie
Жыл бұрын
Happy to help! thanks for your comment
@JACEY1999
Жыл бұрын
when im trying to ping metasploitable2 from kali linux, it shows "host unreachable" :(
@JACEY1999
Жыл бұрын
i exactly did the same steps, pls help me
@GDNetworkingNewbie
Жыл бұрын
11:45 I hope you have both the machines on the same subnet, i.e., check their IP address if they are on the same subnet
@kalpeshkadu9795
2 жыл бұрын
yar ip address 192.168 is tarike se nahi aaraha brudge adapter pr shiftkiya tobhi
@GDNetworkingNewbie
2 жыл бұрын
10:55
@deepakrawat4503
2 ай бұрын
Bro it's not working still ip show 10.0.2.4
@GDNetworkingNewbie
2 ай бұрын
configure DHCP with 192.168.10.0/24 subnet, I hope it will solve the issue
@nedimice
Жыл бұрын
Thank you very much for the beneficial video!
@GDNetworkingNewbie
Жыл бұрын
Glad it was helpful! thank you for your comment
@drewnator1337
Жыл бұрын
thank you
@GDNetworkingNewbie
Жыл бұрын
You're welcome
@user-rh4sy6mo1g
Жыл бұрын
Sir I am unable to click the button of enable network adapter
@GDNetworkingNewbie
Жыл бұрын
I sent you a message and hope that your problem has been solved.
@user-rh4sy6mo1g
Жыл бұрын
Sir I am unable to click the button of enable network adapter
@GDNetworkingNewbie
Жыл бұрын
I sent you a message and hope that your problem has been solved.
@user-rh4sy6mo1g
Жыл бұрын
Sir I am unable to click the button of enable network adapter
@GDNetworkingNewbie
Жыл бұрын
Please turn off the virtual machine first and try again
Пікірлер: 129