Replacing the old 2-prong plug on my 1937 Delta DP-220 drill press with a 3-prong grounded power cord. The only time you'll see a newer tool with a 2-prong plug is if the electrical components are double insulated, denoted by a double square symbol. If the tool is not double insulated, it should have a 3-prong grounded plug. If you have a metal tool with a 2-prong plug and there's an electrical short, your body will become the path of least resistance for the electricity. Just to be clear, I am not an electrician. Electricity can be very dangerous so proceed at your own risk. See the links below for the parts and tools I used:
Indoor Power Cord:
amzn.to/3fCuVkx (affiliate*)
Outdoor Power Cord:
amzn.to/39GZ1zs (affiliate*)
Hot Glue Gun:
amzn.to/2PqmRsx (affiliate*)
Glue Sticks:
amzn.to/3dwSxUP (affiliate*)
*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!
Негізгі бет Тәжірибелік нұсқаулар және стиль Installing a 3-Prong Grounded Power Cord on a Vintage Delta Drill Press
Пікірлер: 43