I laughed when i saw that hex bolt head, happens to me when i cant be arsed getting the hex sockets when i have torx bits on hand. Ive been eyeing off those seq. shifters for a while, keen to hear youre honest opinion on it. Keep up the quality vids they're very informative. Love the skids too👍
@mikenolan3060
4 жыл бұрын
Wow that's a huge job for a shifter install, yep I wouldn't be trying that in the front yard by meself.
@exratic5908
3 жыл бұрын
absolutely not
@card1performance668
Жыл бұрын
Its good to see the pricing has dropped significantly ($1599). I have seen some users that have issues with gears grinding, on synchro engagement transmissions, with the S1 shifter. Consistently shifting hard with synchro transmissions can and will eventually bend the forks. This will also eventually wear down the synchro's. I honestly wouldn't use this if my transmission was stock unless I had money put away for repairs. How has yours been holding up @aussieauto? I have a straight cut dog engagement lvl 7, tr6060, being built at RPM right now. I think this shifter would be an awesome addition. Straight cut dog engagement, combined with this shifter, would make it a legitimate sequential. I'm so stroked for it to be finished!
@bonesXU1
4 жыл бұрын
Well what's the verdict, do you like it? It would be really nice if you did a vid on wiring up the gear selector display don'y you think? You have inspired me to finish my gear gator surround at last. It's looking good and a nice seal around the shifter but what a pain it was to make.
@lindsayfoley6460
4 жыл бұрын
Any reason for s1 over bremer? Been eyeing seq shifters off since i saw their demo at SEMA a few years back, also just watched ur video of it running looks good ;)
@Itzdiablo7
4 жыл бұрын
Lindsay Foley Bremer shut down there sight because there really behind that’s why s1
@Johnnyroten
Жыл бұрын
Can you accidentally grind gears? Is there any issues shifting if the clutch pedal isn’t depressed all the way or if you let off the clutch pedal too early when power shifting?
@mrodsf150
2 жыл бұрын
So a year ago they were double the price or am I missing something? Looks sweet!
@mythos000000025
Жыл бұрын
Probably the $ conversion. Australian dollars are(or were)valued less. May be the reason for the $3k cost, but maybe not
@Hiller5150
3 жыл бұрын
Like the video, but I’m a bit curious you can bolt this shifter on and have a sequential shifter pattern to and otherwise stock t56 you don’t have to have the ppg sequential gear set as well? Just the shifter not the 16,000$ u.s. gear set . Just a shifter for this to function sequential?
@trevordennis4248
3 жыл бұрын
Your correct its just a simple pattern conversion. You still need to use your clutch. It’s not like the ppl gears.
@lucascourtney4479
Жыл бұрын
Hey I really hope you see this but can you give me an honest update on the shifter? I want one but I'm getting bad reviews from ppl and I'm not sure if I wanna risk that much on my build. Any advise would be awesome man. Sweet cars, tou got my sub forsure.
@cameronallan3771
4 жыл бұрын
Nice video mate sounds so mint. Got to love railing the gears in sequential gear box any plans to take it back to wsid once you've done what you have to
@AussieAuto
4 жыл бұрын
It's ready to go mate unfortunately they've torn up the track to rebuild it so likely won't be racing this side of the year
@cameronallan3771
4 жыл бұрын
@@AussieAuto are ture forgot about that owell mabey a powercruise or something come up once you know what is finished
@doraexplora9046
2 жыл бұрын
Looks like a great mod.
@jawswingingjunkie9628
4 жыл бұрын
hey man you should enable likes because i wanna sport you and give you likes as well if not we understand bro keep doing what you're doing.
@AussieAuto
4 жыл бұрын
Im not sure why but the likes are on for some but not others
@SupernaturalPowerz
Жыл бұрын
I really want this shifter,, but no idea if it's worth it or if it'll even improve the transitioning of gears,, my gear box is horrendous to change gears in because of the short-shifter kit in it,, can never get that quick smooth transition,, ;(
@hammatime94
4 жыл бұрын
Pretty sure they tell you to do it with the box out. That's what I was told when I enquired with them.
@alexanderknight7793
3 жыл бұрын
Did you put it in your Nissin GD-R with aluminium intake and chuned with a Haltech ecu?
@piano8341
3 жыл бұрын
Nice!!!
@umadbra
3 жыл бұрын
Mistake number 1...I am a mechanic and I sorta know what to do... I'll use this guide as reference... Bro, that's how you end up with extra parts you throw away because you have no idea where you missed a part.
@robertcaldwell4626
3 жыл бұрын
Hey mate how did u bleed the clutch as i have the same as u & it's so hard to bleed it properly so u get a proper clutch ped. So any info or tips on this would be great cheers mate
@AussieAuto
3 жыл бұрын
Hay mate the trick with t56 and tr6060 clutch bleeding, is simple you need to manually bleed it with a mate to help Pump the clutch pedal then hold have a buddy crack the bleed nipple, shut the nipple and repeat until you have no air come though You'll still have a soft pedal or pedal might be on the floor, you then need to pump the clutch pedal in and out 100-150 times not joking it will come good over the next couple times you drive it it will feel abit low but will eventually self adjust and pedal will come good
@donlabani7332
Жыл бұрын
Any update on this
@MD-th9sn
Жыл бұрын
it’s only 1500 now
@BigNerdLandon
3 жыл бұрын
What kinda car is that?
@iamasmurf1122
4 жыл бұрын
Im a mechanic as well and at age 46 nearly 47 i know 100% cars are a waste of time , im really sick of working on peoples garbage bringing me their problems with their fucked attitudes ! No these days i am investing on sharemarket anyone think money is in cars is dreaming
@teamallyracing1780
3 жыл бұрын
Lol who said cars are investment seems like u don't enjoy ur job might as well pack up know or may be invest in sharemarket for someone else to enjoy your money may be get a hobby to enjoy life a bit before you go 6 ft under ,life is short
@maxdredxfg
2 жыл бұрын
Prolly just a shitty mechanic
@skarademirlidag
5 ай бұрын
Buy viper or corvette not a transmission
@5533851
4 жыл бұрын
Wow, interesting. Can you shift straight from say, second to fourth? With my TR6060 in my Volvo, I often take off in second gear and slot it into fourth for cruising around. If I HAVE to sequentially select gears and cannot skip, that would suck for overall drivability.
@vongdong10
4 жыл бұрын
Well with your example you'd have to shift 2-3-4 anyway, dont need to drive in 3rd just 'skip' to 4th
@5533851
4 жыл бұрын
@@vongdong10 Nah, I just go 2-4, 3rd is never touched. Same thing if I go 5-2 for a corner, I don't touch 3 or 4th at all, but with the sequential, you have to work back through 4th and 3rd to get to second. Hopeless for a road car.
@vongdong10
4 жыл бұрын
@@5533851 that's what I meant. You have to shift through all the gears anyway.
@5533851
4 жыл бұрын
@@vongdong10 No, with an H pattern you don't shift through all the gears if you don't want. I don't think you've ever driven a car before, you clearly don't get it. An H pattern box allows you to skip to any gear you want. Sequential does not.
@vongdong10
4 жыл бұрын
@@5533851 I'm talking about the sequential shifter you fool. I've been driving for the last 10 years.
@imantisocial3179
4 жыл бұрын
I see some issues with this: 1. Not convenient for a street car or a daily 2. Pain in the ass to install 3. Will be worth more than the car itself in a year or two Cool though.
@AussieAuto
4 жыл бұрын
I don't disagree 🤣
@imantisocial3179
4 жыл бұрын
@@AussieAuto it is what it is 😄
@DriesOG
3 жыл бұрын
Are these cars cheap in AUS? In America GTOs are pretty darn expensive.
@AussieAuto
3 жыл бұрын
Currently everything has skyrocketed in price due to (covid tax) 🤣 Normally you can find 2000-2006 LS powered sedans for $3000-$7000AUD Now they are $10k+
@imantisocial3179
3 жыл бұрын
@@DriesOG they are very affordable second hand.
@driver3025
4 жыл бұрын
Noice...
@franklyn315
2 жыл бұрын
too bad they don't fit the supra 😔
@lisaw8431
3 жыл бұрын
Without dog gears in the gearbox whats the point?? It will result in alot of broken syncros from boy racers trying to shift quickly and not getting the clutch fully actuated... looks like over priced garbage to me
@sgbikelife
3 жыл бұрын
Same t56 as camaro SS?
@AussieAuto
3 жыл бұрын
Likely small differences but essentially the same box
@duz10z30
4 жыл бұрын
With the instal, would it have fit if you just unbolted the gearbox mount to let the box hang down instead of taking the box out?
@AussieAuto
4 жыл бұрын
Nah tried it, unbolted the cross member and let the box drop still wasn't enough room.
Пікірлер: 70