Thank you for the video! Might want to put the 80 tooth rear sprocket and a 9 tooth front sprocket on it for hills. I have two 36v e300’s with this set up. Believe it or not I didn’t loose but a couple miles an hour. Way better on the hills and my motors stay cooler. Sprockets are direct bolt ones, just have to notch the rear deck support to clear chain and add length to the chain.
@ugglyfaceproductions
2 жыл бұрын
I had the wires cross..but thanks!
@11bayrat
2 жыл бұрын
Thanks for sharing and making this video! I hope you do a update on this soon.I’m setting up one now so I’m looking forward to see your review of your set up.I’m hoping to do the mods you have done.so thanks for sharing
@rockercater
2 ай бұрын
*COOL* *I Hav a project then* *THANK YOU FOR THE INSTRUCTION VIDEO* *CATER*
@curtiswheeler2212
7 күн бұрын
to make deck get another razor scooter a broken one from scrap and cut the deck off that one, the bolt pattern would be exactly the same on both decks put longer bolts fasten donor deck right on top of the original not much extra room only 3/4 but you can put three even four acid batteries in that compartment standing up deck will bolt in place except rear needs spacer, just in case you want 48 volts one day. PEACE!
@beatsentertainment2347
3 жыл бұрын
Buddy u got good grip on that test ride I thought u might fall. Good video I'm new subscriber cheers
@rafaellanden2159
3 жыл бұрын
I know it is kinda off topic but do anyone know of a good site to watch newly released movies online ?
@connorrohan8786
3 жыл бұрын
@Rafael Landen i use flixzone. Just google for it =)
@emilionicholas8089
3 жыл бұрын
@Connor Rohan Definitely, I've been using Flixzone for since april myself :D
@rafaellanden2159
3 жыл бұрын
@Connor Rohan Thanks, I signed up and it seems like they got a lot of movies there :D I really appreciate it !!
@connorrohan8786
3 жыл бұрын
@Rafael Landen Happy to help =)
@venkataratnadeepsuri1084
Жыл бұрын
Helmet and two hands on the handle really helps
@NortheastVintage
8 күн бұрын
You’re telling me! 😮
@creativebuilds2
3 жыл бұрын
You broke the sound barrier at 29:27 lol
@NortheastVintage
8 күн бұрын
😅😅
@WestleyBates
Жыл бұрын
What it should have came with from the Factory
@NortheastVintage
Жыл бұрын
Totally agree!
@DRHP73
4 жыл бұрын
I just got the same one from Amazon a couple of days ago. Runs well but pales in comparison to our other 500w E300.
@NortheastVintage
4 жыл бұрын
Thx. I ordered a 500w and am curious as to how it’s going to perform
@@NortheastVintage Did you install that motor? Was it a direct fit or did it need some modding to get it to fit?
@ryujiyamazaki583
4 жыл бұрын
Hi, amazing video and the scooter looked fast. What speed controller are U using for this and what Rear sprocket will U B using?
@Foozy125
3 жыл бұрын
Search "overvoltedscooters" on ebay they sell both the speed control and a 65 tooth sprocket for better hill climbing.
@CM-1723
3 жыл бұрын
I'm surprised these razor scooters did well in America they are so slow when stock . I've just picked a e300 up and put 2 new batteries in , and now I'm looking up how to make it go faster for a 9 year old lol
@velesoid
Жыл бұрын
Razor scooters are perfect for upgrades as they’re simple and veeery cheap
@ELViSLOK
4 жыл бұрын
That's same engine what i did 350..stock was 250 2new batteries. New on off switch. All wires new . My scooter goes 15mph
@ELViSLOK
4 жыл бұрын
Also the razor moped. Controller
@NortheastVintage
4 жыл бұрын
Try going with hoverboard batteries, and an overvolted controller with a 500w 24v motor.
@CM-1723
3 жыл бұрын
@@NortheastVintage did you fit hoverboard batteries to yours ? Also If you get a 24v 350w or 24v 500w motor do u have to change the stock controller
@charlieson3394
3 жыл бұрын
@@CM-1723 The controller voltage must match battery voltage set up, 36V battery set up to 24V controller will burn it. And wattage on the controller must not be higher than rated amp on the motor. The wattage on motor is just NOMINAL number the real number is the amp it can handle. For ex; 24V 350W 19A max motor, you can use upto 36V 450W controller. 24V 500W 28A max motor, you can use upto 36V 672W controller. you can overvolt but the controller watt can not be higher than what the motor can handle. But in overall try to always match the voltage and wattage of battery system, controller and motor for long lasting safe run of system.
@-meganeura
2 жыл бұрын
@@charlieson3394 Yes it´s good idea to match voltages, 24v bat, controller and motor, but you should never use a controller with less power than the motor can draw, so for a 350w motor you will need a 350w or higher (500w) controller
@ronaldch7365
5 ай бұрын
It’s because the chain is so tight
@DizzyDad
2 жыл бұрын
a go pro ona head moment dangerously ridden with a selfie stick
@NortheastVintage
8 күн бұрын
Totally agree! 😮
@Foozy125
3 жыл бұрын
I did something similar with my e300 scooter same speed control and motor, however it's worth noting I switched from lead acid to a 36v Li-ion 20ah battery that fits fully under the top shell and I have yet to use all the capacity.
@Foozy125
3 жыл бұрын
36v 20Ah battery upgrade (fits under top deck) www.amazon.com/dp/B08VN2Q1ZF/ref=cm_sw_r_sm_apa_glt_fabc_SG7568HBNYJ2HF8BQMF8?_encoding=UTF8&psc=1
@ugglyfaceproductions
2 жыл бұрын
Ok..cool..
@paulmyers2912
2 жыл бұрын
Where did you purchase your lithium battery from?
@scottwilliams895
3 жыл бұрын
Do you think dumping 36 V thru a 1,000 W motor controller into a 24 V-, 250 W-rated motor had anything to do with the old motor burning up?
@scottwilliams895
3 жыл бұрын
I'd venture a guess that using the same significant over-voltage and over-curernt into 24 V-, 350 W-rated motor is going to give up it's smoke just like the last one did.
@jmanbedard5883
2 жыл бұрын
Done
@douggreen7432
3 жыл бұрын
Did you ever install the 24v 500w motor?
@koreyhannan9071
2 жыл бұрын
Hi I have an E 300. Would I get any benefit out of keeping it 24-volt but upgrading to 350 watt motor?
@Psycandy
Жыл бұрын
there's a hack with soldering another shunt to the board, works well, gets the torque up enough to be almost OK for an adult
@bobsoft
Жыл бұрын
Yes, but you also want to upgrade the controller and the batteries for longer run time and more speed.
@koreyhannan9071
Жыл бұрын
@@bobsoft thank you
@Simcore999
Жыл бұрын
👍
@CSJiGSaW08
2 жыл бұрын
Does the 500W fit or you have to modify the framing? Also what advantages do you have with 24V vs 26V on 350W or 500W? I don't have hills but want higher speed while some torque. So im thinking about a 44 teeth or 47 teeth rear sprocket.
@NortheastVintage
2 жыл бұрын
The 500 watt motor is a monster. I had to weld the motor to the frame to make it fit. But it’s got monster torque
@scottwilliams895
3 жыл бұрын
@26:48 Are your lead acid batteries "10 amps" (current output), or "10 amp-hours" (energy storage) ?
@edwincanul5053
9 ай бұрын
Hello sorry where are you because I have a scooter but I can’t find where to fix please you are Portland, Oregon
@JPSURF16
2 жыл бұрын
I plan on running the 3 hooverboard 36v batteries on the stock 250W motor until it smokes with the plan to upgrade it to the 350W. With that being said what controller should i order?
@NortheastVintage
2 жыл бұрын
Get a 36v controller off eBay. I don’t think the stock controller will work with 36v. I’ve since gone to 52v lithium ion batteries!
@khelfrich08
2 жыл бұрын
@@NortheastVintage Can you post a link for the 52v batteries you went with? Those would still be compatible with a 36v controller?
@vikkidyer
11 ай бұрын
@NortheastVintage please could you do an update video of your scooter. I would love to know what your setup is now 😊xx
@chipcullom9123
2 жыл бұрын
Hi Matthew, Thanks for the informative vidio on installing a 350w motor on your razor. I am doing the same thing on my old e325, my problem is, the 4 motor mounting screws dont exactly line up, I was able to get 3 in. I may try to find tapered mounting screws, or, I could drill out the hole on the motor, and still have the lower threads on the frame. Is there a better fix ? Thank you, Chip C , can I give my email ?
@NortheastVintage
2 жыл бұрын
To be honest, I just welded the motor to the frame as I don’t expand upgrading the motor from the 500W motor I currently have
@exploringthederelictwithlo7225
2 жыл бұрын
Okay so... How did you flip the batteries down and manage to put the foot plate back down???
@NortheastVintage
8 күн бұрын
I ended up cutting a rewelding the battery tray to make it deeper
@CSJiGSaW08
2 жыл бұрын
Using your setup of 350W, whats the advantage of 36 volts. Im looking for speed and range. (44/47 teeth) on 350W.
@NortheastVintage
2 жыл бұрын
More watts, more power. For speed and torque. Distance is all battery capacity. Go lithium ion
@leanrambles7468
2 жыл бұрын
Are there any just effective bolt on upgrades?
@danielcueva4685
3 жыл бұрын
Kudos! Where did you source the replacement motor?
@vvvazirixx8549
3 жыл бұрын
looks like amazon from the box
@NortheastVintage
8 күн бұрын
Amazon!
@crateandbarrels
3 жыл бұрын
I have a stock e300. what would you recommend if I'm OK with the top speed, but want more torque and a longer ride?
@NortheastVintage
3 жыл бұрын
No need to overvolt if you’re happy with the top speed. I’d go bigger 36v motor.
@ugglyfaceproductions
2 жыл бұрын
Hi Matt i changed my controller and batteries on my razor echo smart.But the chain spins and not the tire..What i do wrong?I have a video on it..plz help!
@NortheastVintage
2 жыл бұрын
Sounds like the one way clutch on the wheel hub is broken or on backwards?
@user-kx3mu5cc2b
3 жыл бұрын
УМЕНЯ ЕСТЬ ТАКОЙ САМОКАТ .ТОКО ПАЛОМАННЫЙ НЕТ КАНРОЛЕРА ОБОРОТОВ И РУЧКА ГАЗА ПОЛОМАННАЯ .ЩАС ЖДУ С КИТАЯ ЗАПЧАСТИ .ОЧЕНЬ НАДЕЖНАЯ КОНСТРУКЦЫЯ ЕГО
@trevorsmith2502
3 жыл бұрын
hi i see in video that you have not got circuit breaker fitted did you just connect wires together or use something else
@NortheastVintage
3 жыл бұрын
Correct. I deleted the circuit breaker. No problems so far but I should install one. Especially since I’m now using lithium batteries
@jacktunado
2 жыл бұрын
Link for the motor?
@Ray76number1
Жыл бұрын
what motor did you use
@levi.k4017
3 жыл бұрын
Can you do this with the e90?
@zhelapro4728
3 жыл бұрын
if i install 2000w 48v motor, which battery can i use? 48v 20Ah 1000w?
@mrjimm6042
3 жыл бұрын
your battery needs to be 2000w just like your motor
@@NortheastVintage which one do you use for the 350w motor that was a direct fit?
@HoopstarsGarage
3 жыл бұрын
two words: editing ;)
@scottwilliams895
3 жыл бұрын
Playback speed: 1.75
@scottwilliams895
3 жыл бұрын
And liberal use of " right arrow key = jump five seconds "
@anyons5
2 жыл бұрын
I actually like the narration of figuring out how to do it. He runs into several issues that people may accidentally do by mistake and figures out how to correct them.
@NortheastVintage
8 күн бұрын
@@anyons5thanks! I’m just bumbling my way through. I’m no expert!
Пікірлер: 89