“Yea yea yea, so i replaced “ 😂 str8 ignored his own interruption, top tier
@73SINNER
Жыл бұрын
“Some times in the field it isn’t possible “ spoken like a true journeyman !
@Sarge92
Жыл бұрын
yeah but at the same time there is a reason they require you follow these things and if you shouldnt be doing something because x thats when you should do it a different way that would be complient i do get the sentiment though and yeah sometimes you just gotta make do with what you have and im unsure what the issues would be for using a press fitting there
@JUNEBUGLLC
9 ай бұрын
@@Sarge92he should of solder it only use press which I don't trust compared to sharkbite personally in small places u can't solder only
@JUNEBUGLLC
9 ай бұрын
@@Sarge92he probably could of used a shark bite too in the spot that said not to pro press and not have compromised the pipes integrity or something
@josephjames6603
Жыл бұрын
"Hey boy... where's your expansion tank mount?"😂
@JenniferFuchek
Жыл бұрын
It's on there. Up at top to the right of the exhaust pipe (to left of the box on the shelf)
@davidwbowlby
Жыл бұрын
Thanks for letting me know that a recirculation pump exists, I definitely need one!
@NTATchannelNickTaylor
2 ай бұрын
What does it do? I've never seen one of them on a water line from a water heater. Just curious.
@mattcoleman6780
Жыл бұрын
Beautiful. Like a work of art.
@bradw0535
Жыл бұрын
Good stuff buddy, looks great 👍
@Crawdaddy269
Жыл бұрын
Hey Boy...you make me want to use only pro press from here on out boy!!. I think i just might. Thanks Loads!
@waterheaterservices
Жыл бұрын
For us busy plumbers pressing is the way to go
@ClosedProductions
Жыл бұрын
I’m not a full time plumber so when I saw the cost of the Viega I was saddened. I wouldn’t use it enough to justify the cost but damn that sure looks like a time saver 😭
@Kp-2
Жыл бұрын
My man felt risky unthreading that gas line😭
@tng_x_retro6383
Жыл бұрын
In Germany there are special inserts we use when we press near a joint ^^ that way the soft copper is not a problem ^^
@sturutherford697
Жыл бұрын
You could be the next comment he voices over in a video. Congrats!
@daddy1571
Жыл бұрын
That would be smart. Do you think this kid cares about doing a proper job? He uses a mimicking voice to validate ignoring important plumbing installation and the bumpkins that like this channel guffaw like walruses while rolling around rubbing their burger bellies blowing gas.
@Tyrone8700
Жыл бұрын
@@sturutherford697yeah “european trades guy” with a foreign accent would be a great addition
@f-puppet4059
Жыл бұрын
The end product looks amazing; a work of art. I love you guys' videos 👍
@kaip310
Жыл бұрын
As I was told once on-site "The best kind of plumbing is the kind that works."
@fredrikwiberg46
2 ай бұрын
Since I work around alot of blazed pipes I've made a habit of always keeping supportsleeves in my car. That way if I come across a pipe that's been softened in any way, it's not an issue.
@simorebuths7301
Жыл бұрын
“We should be ok” spoken like a true senior apprentice.
@am44_67
Жыл бұрын
Clean work but you forgot check valves
@halucinator1
Жыл бұрын
I love how you ran the pressure relief line
@johnreid3966
Жыл бұрын
The 3/8ths ball valve t intersection quantum drive holy crap that's a lotta names for a lotta stuff 😂😂😂 good on you for making these
@utube4greenfuture
Жыл бұрын
I would've added a ReadyTemp Intelli-circ for simultaneous on-demand and scheduled convenience.
@ericr513
Жыл бұрын
Hey Boy !!! You should really reconsider using that cheap tool. Back in my day, I would Solder her all the joints and make them look as clean as a whistle.
@charlescoates5761
Жыл бұрын
👍👍💯❤️🔥🙂 Good job Evan Keep up the great work
@sargentpoptart4080
10 ай бұрын
Looks great only thing I'd say is the home inspector will ding this because the pressure relief valve does not drain conspicuously and have a visible air gap. But instead goes into a wall and out of sight. Besides that, good shit
@replumb
10 ай бұрын
We are required to plumb them to the exterior. No air gap. It’s not a basement install
@patrickhayes3099
Жыл бұрын
Nice work. More Navien installs for everyone!
@PLAYERMIKEY
Жыл бұрын
Hey boy that water valve is pointing towards the electrical box haha
@regioatl79
Жыл бұрын
Great video
@deadreckoning4868
Жыл бұрын
LOL i fucking love ur videos man , make my day 😊
@Ballsy_
Жыл бұрын
the "ey boy" always gets me
@NFTYCENT
Жыл бұрын
Beautiful work ❤
@frankcastillo8609
Жыл бұрын
Beautiful finish 👏
@marknunez826
9 ай бұрын
Dude I fucking love your videos and dialogue 😅😂 do you play apex by chance? Ur super chill lol
@salsanchez5019
Жыл бұрын
Interesting you installed the return into the cold inlet above and not at the drain bib at the bottom.
@bcope8501
Жыл бұрын
That’s real smooth.
@user-gh1ql5uc8t
Жыл бұрын
If the install cost of a 75 gallon gas water heater is lower than going to a tankless then you're getting scalped somewhere. Best shotgun guess would be a markup because you're in Cali and they might have a problem with natural gas and be taxing it or placing an extra tariff on it... or both. Normally, at least in my experience outside of Cali, it is more on par with a 50-gallon power vent in price as opposed to a 75-gallon heater.
@gregabrams5792
Жыл бұрын
We don't install hot water heater recirculation pumps anymore because it absolutely destroys copper and pex. can you give us your opinion on that?
@briansnoopy123
Жыл бұрын
Yes it does, in restaurants it's almost always first place it leaks
@spacemanrick2014
Жыл бұрын
Timer and an aquastat. Ream the pipe. Don’t use half-inch recirculating systems. Try to minimize sharp turns on the loop. Propress 90°s are perfect, or you can use long sweep 90°s, or two 45°s.
@texkarlitoes
Жыл бұрын
Love the impersonation 😂😂😂😂
@jamiemixxismjohnson4193
Жыл бұрын
Hey Boi Excellent work 🎉
@ryany8218
Жыл бұрын
Bradford White also make a condensing tankless unit. Ditch the Navien for future installs.
@n0tz10n5
Жыл бұрын
Hey boiah keep up the good work boiah
@CarlosPlumbingNMoreToolReviews
Жыл бұрын
Could you show us how to do the vent and how you place it up there as well? 😎 also AWESOME PLUMBING CONTENT! Thanks!
@conair1973
Жыл бұрын
You don’t need to know how to do that
@CarlosPlumbingNMoreToolReviews
Жыл бұрын
@@conair1973 🤣😂 thanks!
@D3MODEAD
Жыл бұрын
His voices are phenomenal lmao
@HBO1984.
Жыл бұрын
Who the hell needs a 75 gallon water?! I had a 30 gal for many years and upgraded to a 40 gal. Now it's more than enough water. 10 extra gallons makes a big difference.
@bigpjohnson
Жыл бұрын
Virtually required if you have 3+ bathrooms or a jacuzzi or rainfall/body showers. Lots of builders just put in 2 40s or 50s, easier than a single huge one.
@philipthompson7341
Жыл бұрын
My daughter’s house came with one of those walk in tubs, it has an 80 gal…
@jefflosey1561
Жыл бұрын
Clean install
@julianrodriguez3596
Жыл бұрын
240a2 is where its at. might be over kill in some homes but i always give them an option
@danisahumanable
Жыл бұрын
God job, next time get two vent 90's to make up that small offset with the vent. Keep it up!
@danisahumanable
Жыл бұрын
You can alter the 90's to make the small offset*
@Seven7Pain1
Жыл бұрын
awesome job but that big old tank heater i would have tried to sale them a rinnae but if they turn down the navien they defiantly wouldn't have like price on rinnae RU199i
@ImTrans-Former
Жыл бұрын
Superb work like always my friend. Keep it up .
@Sharper714
2 ай бұрын
Perfect spot for a tankless. Way better.
@dogsbyfire
Жыл бұрын
Fine work
@johnpeters8652
Жыл бұрын
Looks good.
@saltybuckeye
Жыл бұрын
navien tanks are awesome
@josehagevoort1895
Жыл бұрын
Great job 👍🏼
@yedidyafischer8637
Жыл бұрын
Hey boy u are a pro ya ya ya ❤ bin loving your content all the way frome israel alwas make me 😅😂
@RavenBlaze
Жыл бұрын
And California safe!
@Toxicmasculinity69
10 ай бұрын
I wish you were in my area
@tylergordon8045
2 ай бұрын
If you are in socal the rebate on the npe240s would be $200 better than the one 240a and the heater is roughly $400 less. Just in case it helps buddy
@TheWatchGod
Жыл бұрын
This is Art
@Fractal-insights
Жыл бұрын
good stuff, keep up the background voices
@matthewhoffman9242
Жыл бұрын
If you don't mind me asking, where does the pressure relief pipe to, around here they just pipe it straight down to within a few inches of the floor/pan (if it has a pan)... and is it because its a gas model that it doesn't pipe into the pan?
@sergiososa5691
Жыл бұрын
Looks nice
@dontspeak2994
Жыл бұрын
I watched a friend put his finger in the Milwaukee copper cutter and then turn it on. Would you believe it cuts index fingers too? 😂
@dexdshxck
Жыл бұрын
Bru I need his thoughts the next day on that pivotal choice in life
@joeyhohl1977
Жыл бұрын
Looks good boy!!!
@jimsyhammond
Жыл бұрын
What's the point of the safe tray under the unit, when it just drains to the ground anyway? Should drain outside. Or install a leak detecting valve on the cold inlet to shut the water off when it leaks
@lewsea70
Жыл бұрын
Just my 2 cents wish they would have went endless water heater.
@tedmich
Жыл бұрын
Grundfos pump! nice! Their industrial stuff is BUILT
@MrCameron8841
Жыл бұрын
Bro uses a Milwaukee pipe cutter 😂 the Dewalt one is like 2x faster
@Zayedl
Жыл бұрын
Hey boy, looks great
@perfectsoulmates2023
Жыл бұрын
HEY BOI , RRRRRRRRRRRR WHY YOU HAVE SUCH COOL VOICES ??? RRRRRRRRRRRRR
@tedangle8224
Жыл бұрын
The big boy.
@Samson484
Жыл бұрын
Adding all the stupid comments the “experts” make is the best part. Lol
@aaronsvendsen1938
Жыл бұрын
Curious why they wouldn’t go to tankless? Seems like a lot of energy used to keep 75 gallons hot all the time.
@bigpjohnson
Жыл бұрын
Newer tanks are far more insulated. More importantly, they're simple as hell while tankless are complicated pieces of junk with 50 failure points plus more maintenance. Need lots of hot water, get 2 tanks.
@aaronsvendsen1938
Жыл бұрын
@@bigpjohnson hmmm. I’ve had tankless water heaters for almost 20 years and never had any problems. I agree though that they are more complicated and would have a higher probability of something going wrong. I live in Alabama and they only install tankless water heaters in the city I live in for new builds.
@bigpjohnson
Жыл бұрын
@@aaronsvendsen1938 I live in Texas now and the water here is hard as hell. My tank builds up tons of scale and friends with tankless need to descale them regularly. Paid $500 for mine versus 2K for theirs, need to save a lot on energy to make up for it!
@aaronsvendsen1938
Жыл бұрын
@@bigpjohnson I can definitely see hard water being an issue with the tankless!
@AtomicBoyscout
Жыл бұрын
Clean install kid. Looks good. Love using propress on anything i can, f*ck cpvc t&p lines lol
@Heater4
Жыл бұрын
Daaaaaaaaaaaaaang, that's sweet
@Ish_714
Жыл бұрын
I always wondered how much a Navien install costs or the retail price on the machine alone.
@chuckm3690
Жыл бұрын
Can’t go wrong with the rg275
@gustavocampos775
Жыл бұрын
How do you add a recirculating line to a tankless water heater?
@stunner55
Жыл бұрын
Love the videos. Question; do you ever install tankless water heaters???
@simonoutdoors4969
Жыл бұрын
Where are you where all the water heaters are up on a stand and why? Here in MO they all jist sit on the floor of the basement
@GrimReaping
8 ай бұрын
Everything is possible in the field. If you dont believe that, just ask an engineer lol
@brentclement9082
Жыл бұрын
Those voice effect sounds 😂😅😂
@soundsleep1
Жыл бұрын
No heat sleeves for the copper pipes? I just assume it’s in a residential garage.
@replumb
Жыл бұрын
Insulation is installed after completing the repair. At the end of the video
@wantapgt
Жыл бұрын
What’s that pump do?
@a_w_bukhari7579
Жыл бұрын
The “HEY BHOY”s are getting meaner 😅
@Joemck96
Жыл бұрын
Why does my POS water heater still leak even after i shut the supply valve. I have the drain open and the air valve open
@mathnerdm
Жыл бұрын
What are your thoughts on tankless water heaters? We're thinking of making the change from a tank
@Ish_714
Жыл бұрын
Hope your home is equipped with a dedicated recirc line, a Navien A model would be a Beauty
@jrdoucett
Жыл бұрын
We just switched when our tank died. It's really nice never running out of hot water.
@notapplicable430
Жыл бұрын
They're great until they stop working. Good luck getting them repaired. I went back to good ole gas fired hot water.
@Deathsaber435
Жыл бұрын
Are the vega fittings more expensive then say a fitting you solder in place
@BillWalters77
Жыл бұрын
Does the recirculating pump heat water with solar thermal panels?
@Ish_714
Жыл бұрын
You'd need to supply the pump with 120V. In theory, a recirculation set up powered by solar panels, sounds efficient.
@isiaac5715
9 ай бұрын
Dumb question if the pump is flowing towards tank why is there a hose I. Before the pump ? Wouldn't you want it after ?
@multipotentialite
Жыл бұрын
Why can't you press near a solder joint?
@jamesmonroe9580
Жыл бұрын
nice
@dgrblue4162
Жыл бұрын
Would a on-demand unit work in this situation, seeing that it was a gas-fired tank?
@ricksanchez6411
8 ай бұрын
Why do you trust a rubber o ring vs a welded joint
@billybuilds
Жыл бұрын
Hey boy, if a old man like me gets into this press fitting stuff what tools is a good start?
@jacobaguilar6756
Жыл бұрын
why no solder those crimps just creates more work for the next guy and waste pipe
Пікірлер: 179