Best "how to install highway bar on sportster"...well done, thank you.
@PABeardedBiker
5 жыл бұрын
Harley Street Bob thank you so much. I really appreciate that. I’m glad you enjoyed it. 👍🤘
@mr.waffles2555
5 жыл бұрын
Thanks for posting this. I wasn’t sure if the engine was being supported on that stabilizer and was apprehensive to remove the bolts until I knew. Good video.
@PABeardedBiker
5 жыл бұрын
Mr. Waffles no problem. I’m it helped. Be safe.
@HarleyDayRider
6 жыл бұрын
Another great how to video. You make working on the bike look so easy. Can't wait to see the highway peg video. Ride Safe
@PABeardedBiker
6 жыл бұрын
HarleyDayRider thanks. The highway peg video should be coming out soon. Thanks again
@mikeashbaugh7773
5 жыл бұрын
Thanks. Good video, nice to see someone else has a dirty sporty too
@PABeardedBiker
5 жыл бұрын
Mike Ashbaugh LoL. I should have washed her before filming. Thanks for watching.
@s.goddard7356
5 жыл бұрын
Thanks for the video. I was looking for what to take those screws out with, T45 torx. My instructions stated to torque the bolts to 25 -35 ft lbs. Nice job. btw My bike is dirty too.
@PABeardedBiker
5 жыл бұрын
S. Goddard Thanks. I tell everyone that I bought the bike to ride not to polish. Lol. I’m glad I could help.
@badgerfarmgirl336
6 жыл бұрын
Great video..those bars are bike savers for sure
@PABeardedBiker
6 жыл бұрын
BadgerFarmGirl thank you for your comment. I am enjoying the bars even more now that I have my highway pegs installed. Thanks for watching. Enjoy the ride.
@Alpha-move
3 жыл бұрын
Dude, i broke your 666 subscribers. Made it 667. Your welcome. Be blessed!
@PABeardedBiker
3 жыл бұрын
Thank you so much. I appreciate it. Ride safe. 👍
@daxc1972
6 жыл бұрын
I didn't have my glasses on and thought the title for your video was "Installing a cash bar...." I thought this guy has found a great way to make some extra money.... Lol. Good video btw.
@PABeardedBiker
6 жыл бұрын
Dax C LOL. I wish I could invent a cash bar. Thanks for the comment.
@PABeardedBiker
6 жыл бұрын
Thanks for the comment. Simple is always best. Be safe and enjoy the ride.
@junixsk8
4 жыл бұрын
Thank you for the simple explanation. Very informative. Do you remember the length for the bottom bolts and the thread is the same 3/8-16?
@PABeardedBiker
4 жыл бұрын
DDias86 sorry it took me a while to get back to you. I went out and looked at my bike. The length should be 3/4” - 1”. I believe it was 3/8-16 but can’t confirm. Thanks for watching and be safe out there.
@peglegcraig1956
6 жыл бұрын
Good video, they look good, I've been looking for some for my bike, now you need to give her a bath
@selenamclendon7512
4 жыл бұрын
Thank you
@PABeardedBiker
4 жыл бұрын
Selena Mclendon you’re welcome
@KnifeCrazzzzy
6 жыл бұрын
Nice bro way to keep it simple!
@Jibiki
4 жыл бұрын
Great job! How long should it take a competent mechanic to install an engine guard on a Harley Iron? Many thanks!
@PABeardedBiker
4 жыл бұрын
Jibiki thank you for subbing me and for the comment. It should only take about 10-15 minutes. I had to run to the store to get different bolts so it took me a little longer. It’s an easy install. You should have any problems. If you do let me know. 👍
@Jibiki
4 жыл бұрын
Thanks PABB! I'm not very mechanically inclined, but think I might be able to do this myself?! Of course if would help if I had decent tools! Thanks again, and keep up the great work!
@dakidsbac777
Жыл бұрын
Do you remember where did you get that round crash bar from?
@PABeardedBiker
Жыл бұрын
It was either from eBay or Amazon. I can’t remember which one. 👍
@dakidsbac777
Жыл бұрын
@@PABeardedBiker yea, I've been looking for weeks now and can't find those. The ones in video are regular round old school looking ones. The ones they sell now loog ugly.
@Jibiki
4 жыл бұрын
Hi PABB, newbie rider here. If you don't mind me asking, how long should it take a competent mechanic to change a front and rear tire on a Harley Iron? Also, the installation of a Daymaker (or equivalent) LED headlight? Thanks again:)
@PABeardedBiker
4 жыл бұрын
Jibiki if you have a motorcycle lift taking off the front and rear wheels should take about a half hour or so. The tires take a while if you’re using “spoons”. I take mine to to the dealership. They have all the tools to take the tires off and put the new ones on. The headlight would take about 15 minutes to a half hour if the LED headlight has the right adapter to fit the stock headlight plug. I have read instances that some aftermarket LED headlights require you to replace the headlight bucket because of all the plugs and adapters to go from incandescent light to LED. You’ll have to do some research. I think the “Harley” brand LED is a plug and play but they are pretty spendy. Hope this helps. PABB
@Jibiki
4 жыл бұрын
Thanks PABB. Appreciate your keen insight and advise. I lined up a reputable indie shop in my in my area (outside NYC) to change front an rear tires. At $95 per hour, how many hours should it take to do the entire job? Stay safe and well:)
@PABeardedBiker
4 жыл бұрын
Jibiki no problem. If they are taking off both wheels and replacing the tires probably an hour or hour and half depends. That about how long my Harley dealer would take. 👍
@Jibiki
4 жыл бұрын
Thanks PABB. That's exactly what I need to know! Take care----
@PABeardedBiker
4 жыл бұрын
Jibiki good luck. Let me know how you make out. 👍
@coldblitz21
3 жыл бұрын
What bolts 🔩 did you end up useing for the bottom holes 🕳
@PABeardedBiker
3 жыл бұрын
Looks like they are 3/8” course thread bolts.
@nasomaz
5 жыл бұрын
I cannot get the damn bokts on top of the horn to budge.. any advice ?
@PABeardedBiker
5 жыл бұрын
nasomaz I know mine were pretty tight too. Definitely use something like WD-40 or PB Blaster. If you using a small ratchet you want to put a piece of pipe on the handle to get more leverage. Just be careful you strip the bolt end. Thanks for watching. Good luck. Let me know how you make out. 👍
@nasomaz
5 жыл бұрын
@@PABeardedBiker Yes I am worried I started to strip the bolt. Will give WD-40 a shot today. Thanks for the advice
@PABeardedBiker
5 жыл бұрын
nasomaz I’m hesitant to say it but as a last resort if you can get some heat to it with a small propane or butane torch that will help too. Just be very careful not to ignite the lubricant or the bike on fire. Keep a fire extinguisher handy just in case. I would only do that as a last ditch effort. Good luck man. Let me know how you make out. 👍
@nasomaz
5 жыл бұрын
@@PABeardedBiker got myself a half inch drive torque wrench and that did the trick. easy install !
@PABeardedBiker
5 жыл бұрын
nasomaz good deal. I’m glad everything worked out. 👍
@jacobs6219
3 жыл бұрын
What size are bottom bolts ?
@PABeardedBiker
3 жыл бұрын
If I recall they are 3/8” bolts. Thanks for watching?
@44357514
5 жыл бұрын
You could have washed the bike before taking a video of it.
@PABeardedBiker
5 жыл бұрын
44357514 ya I should have. Lol. Thanks for the comment.
@ccruz979
5 жыл бұрын
What a rude comment. Be grateful he's spending his time doing this video
@bobbydazzler9465
4 жыл бұрын
I give you no marks for detailing. That bike should be removed from your care. That’s abuse Sir!
@PABeardedBiker
4 жыл бұрын
Bobby Dazzler lol, I think a dirty bike means you actually ride it. 😂
Пікірлер: 51