Your amazing! I was intimidated by this project and your calm and straightforward attitude made this project kinda fun 🎉 thanks!
@treygriffin6318
3 жыл бұрын
Seriously like frfr me too 🤣🤣🤣👍
@coreamusic
4 жыл бұрын
Exelent haven. You're good teacher Cleanly,simple. Nice voice. 😎
@rango_unchained
4 жыл бұрын
I don't understand how this vid has 15 dislikes? I followed your instructions and my new Kwikset Powerbolt 2 works perfectly. Thank you!
@jetdeco
4 жыл бұрын
Ron Butler You’re very welcome!!!
@marierios1929
3 жыл бұрын
They are probably mad a woman is teaching them something. 😆 I am a handy woman. I paint, hang drywall ,etc. Men on the job always look at me funny.
@thediaryofdove
2 жыл бұрын
My 3 screws didn’t go in, for the lock side
@Bouzsi
3 жыл бұрын
Great video! I was a little worried I’d gotten in over my head, as I’m not a “handy person”... but you made this a super easy project. Thanks!
@Pittsburgh-ke8yt
2 жыл бұрын
It’s plastic junk don’t waste your money. And it doesn’t come with the 4 double A batteries you need
@mrgallardo7069
Жыл бұрын
Worst lock ever . Returned it twice followed directions step by step and doesn't do as I read in Manuel or video . Also reset it a few times . I would not recommend this lock
@Hunter-ef4ch
2 жыл бұрын
For some reason, when I screw in the back screws, the faceplate in the front comes forward cricked
@richardcanales238
3 жыл бұрын
I’m stupid I can’t program the lock
@a.rod876
2 жыл бұрын
I cant get mine to turn 😩 after i put the master default ,
@MrDonmelasa
2 жыл бұрын
Thanks you very much for your time It was very nice easy and simple
@truck57us
2 жыл бұрын
Very helpful. Thank you!
@rahuldgpatel
3 жыл бұрын
1.Good instructions for installing the lock. 2. Programming the lock, please watch the video done by Kwikset. Danger: If you leave Master Code as default 0000 you are risking that anyone can open this lock. Again follow the instructions that came with the lock. First clear all the program codes and then change the master code. Write it down on the instructions paper and save at safe and secured location. Good luck. @Haven please update the programming part of the video. Thank you.
@murugan2402
3 жыл бұрын
will this work with wifi? / alexa?
@handymandivisionllc530
3 жыл бұрын
Thank you best video on this
@jfdez81
2 жыл бұрын
It works thank you
@sharesejackson9403
3 жыл бұрын
Thank Thanks Girl
@brandonevans33
4 жыл бұрын
I really appreciate you doing this video. No longer intimidated to do this project thank you!!
@jetdeco
4 жыл бұрын
Brandon Evans You’re very welcome!
@Hank760
3 жыл бұрын
Did it work for you or was your hole too small for the deadbolt to fit?
@rex789rex
3 жыл бұрын
This lock is junk don’t waste money. Once battery runs out u are screwed, the 9 V battery option is junk never works… many reviews online pointing this out.
@alexponce3063
3 жыл бұрын
U simply put 4 more AA battery 🤦🏻♂️ smh
@freddybastiat8299
3 жыл бұрын
best.video.ever
@israelbarron5903
4 жыл бұрын
Thanks, watched and paused your video as I installed mine. Make it pretty simple. Took me a bit to remove/change the default code, but eventually got it, but thats on me.
@halloweenstore
4 жыл бұрын
simple & easy instructions for DIY'ers !!
@amandachristiansen466
3 жыл бұрын
Wow, you are great at explaining and the camera man was on point! Thank you very much!
@LMM777-biker
3 жыл бұрын
Thank you so much for amazing instructions. I almost return my lock when I found out how difficult The instructions shown. With your instructions I did it right away. you thank you so much
@jetdeco
3 жыл бұрын
Love it!!
@melissagoodwin8055
5 жыл бұрын
Great step by step instructions!
@jetdeco
5 жыл бұрын
Melissa Goodwin Thank you! We truly appreciate you!
@chillios2222
4 жыл бұрын
you made it look easy for sure, best thing i ever did was get a keyless lock! no worrying about keys!
@jetdeco
4 жыл бұрын
Roger Childs Agreed! Not having to worry about keys is phenomenal!
@victorallen3049
4 жыл бұрын
Great video it was a big help
@vicangel2471
3 жыл бұрын
Hi Install a digital deadbolt. The digital works but the key does not turn and removes the pin. Why is that? Thank you
@jillkidd60
4 жыл бұрын
Thank you so much for your instructions. I always get antsy about installing something especially a door lock. You made it so easy for me. I appreciate it!
@jetdeco
4 жыл бұрын
Jill K love to hear that it was helpful!
@Jordan-so1hj
4 жыл бұрын
Very detailed information 👌
@2815Juan
3 жыл бұрын
I hope you erased the factory code to open the lock. I’m a locksmith. And I’ve opened many of these locks at homes because no one erased the factory setting.
@HeatherAyers1
4 жыл бұрын
THANK YOU so much! This was a great tutorial, and it took me probably 20 min to install (with a hand tool, rather than a power driver) - haven't programmed yet 'cause I need to go get batteries (that will probably take longer than the install!)
@jetdeco
4 жыл бұрын
Heather Ayers-Flood you’re very welcome!!
@thehappycathotel4385
3 жыл бұрын
@Haven, how do we get the bolt to program the other way? We have the same side swinging door as your video and started with the bolt in and the knob to the right but when we 0000 Lock 0 Lock, it beeps 3 times.
@marlenneramirez762
3 жыл бұрын
So did you use the black door frame it comes with ? Or left the one you already had ?
@kimberley4883
2 жыл бұрын
3 yrs of providing invaluable help!! Thank You!!
@vinvin1082
4 жыл бұрын
You’re good! Thank you
@beardedirishman670
3 жыл бұрын
Thank you for the help
@jetdeco
3 жыл бұрын
You’re very welcome!
@beardedirishman670
3 жыл бұрын
@@jetdeco i have a question 1234 works but can't get it personalized
@beautifullyblessedbygod740
4 жыл бұрын
Thank you💜
@julesjames593
4 жыл бұрын
Using this vid to teach my kid to install. Thank you!
@jetdeco
4 жыл бұрын
Jules James love it!
@julesjames593
4 жыл бұрын
@@jetdeco "Watch this three times. Billable minutes." Paying the kid to learn the trades is my best parenting tip ever.
@chase2910
2 жыл бұрын
This video was excellent, the only mistake i made was not paying attention to "don't over tighten", otherwise i would've been done in 5 min like the video Great job, ill share this on my Amazon product review
@ElyssaM9899
2 жыл бұрын
Perfect video, clear instructions. Great filming
@Hank760
3 жыл бұрын
I wish I had been prepared for my deadbolt hole on the side of my door to not be wide enough! I was so excited to do with and I couldn’t even put it in my door
@alext1692
4 жыл бұрын
Outstanding video saved hours of reading the Dagon instructions. Which I hate. Thanks 🙏🏽
@d.rogers4184
4 жыл бұрын
Thanks buddy! Any advice on how to install the rest, like the doorknoib?
@SouthernTee71
4 жыл бұрын
Perfect instructions.
@jetdeco
4 жыл бұрын
Tonya Gordon Thank You!
@otonieldabeast
2 жыл бұрын
Súper helpful. Thank you so much
@mazemaze2644
3 жыл бұрын
Thank you. Great video 👍🏽
@flipsgalore5601
3 жыл бұрын
Excellent video truly excellent very well explained
@andydrummerobrien227
3 жыл бұрын
That was good I can’t get mine to program
@teersg327
4 жыл бұрын
Awesome job explaining step by as you do it! I feel like I could do this myself! Great video!
@jsewell5341
3 жыл бұрын
Thanks for the help! Great video!
@jacarajohnson2987
3 жыл бұрын
Thank you so much!!
@zebrabeachgirl115
3 жыл бұрын
do you have to have the key in the door if you want to use the numbers to open the door?
@jetdeco
3 жыл бұрын
Nope! No key required once you program the code 🙂
@zebrabeachgirl115
3 жыл бұрын
@@jetdeco awesome thank you
@jenerlan
3 жыл бұрын
When I tried to install mine. The volt don’t fit in the hole when we tried to lock it. But our old lock is the same size and fit as this lock.
@jetdeco
3 жыл бұрын
@@jenerlan that happens sometimes. You may have to drill out or chisel out the bolt hole so that the bolt can throw/extended fully
@jenerlan
3 жыл бұрын
@@jetdeco thank you so much. Your video was the most helpful 🤙🏽.
@TheOneWithTheAccent
4 жыл бұрын
How do you get it so you wont have to use 1234 as a mc? Im lost.
@drugmoney1369
4 жыл бұрын
That had my wife and me stuck too. That's when we had to turn to the instructions it came with.
@TheOneWithTheAccent
4 жыл бұрын
@@drugmoney1369 sadly the instructions are lost forever
@Bendoverz34
3 жыл бұрын
The passcode one isn’t working and I’m doing it step by step
@Bendoverz34
3 жыл бұрын
The one inside won’t FUCKING go on!! It’s annoying. None of the screws fit and it’s not going on completely Edit: They finally work! The good thing was bent the first time cuz it was too tight, so I took it out and put it back in
Пікірлер: 81