I think 10% of these views came from me coming back to this video every time I got stuck, BUT IT WAS WORTH IT
@reecebigger4693
Жыл бұрын
I like Taylor's attention to detail. He puts a wire we can not see into a green slot but it is orange and corrects himself in post production. That means a lot when you are doing this work for yourself and following along.
@pmacc3557
Жыл бұрын
Thinking of getting one, would you recommend?
@davehowie03
4 жыл бұрын
This was very helpful. Though, I hoped you were going to show the clean up and tuck process for the wires.
@d3one3
4 жыл бұрын
This is going to help me and probably many people tackle one of the most daunting tasks when working on a motorcycle. I've followed you for a few years now. Gonna have to get a t shirt to help support all the work and information you've shared. Thanks! Edit - Just ordered!
@robplazzman6049
3 жыл бұрын
The amount of development in engine and chassis technology in the last 40 years has been amazing. It seemed like I could bring bikes up to almost modern standards yet still had a shed load of little boxes and wires everywhere. At last. Thanks for explaining it well enough for an electrical numpty to understand (sort of)!
@russjohnsonii4654
3 жыл бұрын
Just decided today that i was going to finally rebuild my old cb550. Stumbled across this video and I’m super thankful since I have no idea what i did when I retired it years back. Lol Thank you!
@Yellowfootprints2011
4 жыл бұрын
I just installed my M-Unit with the wire kit, completely rewiring my 1980 CX and it was simple and amazing! Thanks so much for explaining wiring in depth - really helped me understand the Honda wiring system better and how to get around the neutral and kill switch with the M-Unit.
@lumberjaxx3335
3 жыл бұрын
You should have used also the M Button for an additional 50 bucks, it makes everything soooo much easier
@nathanmason522
3 жыл бұрын
What is the function of the M button?
@lumberjaxx3335
3 жыл бұрын
@@nathanmason522 The MButton is a device with cables (one cable for each control) to connect your controls in the handle bar. So you have only one cable for every switch. They connect in a small tube, and from there you only have ONE cable that goes to the M Unit.
@nathanmason522
3 жыл бұрын
@@lumberjaxx3335 I just bought the 2 button and 3 button switches off of Revival, those are made by Motone. I also bought a m-unit blue and the $80 wiring kit, I am fixing up a 82 cb 900c. If I got those switches and plan on putting them on a new set of handlebars, would I need these m button for anything or should those 5 cover the functions of the bike alongside the wiring harness kit and I need to purchase a new battery, hoping to use old regulator/rectifier. Might need to purchase new starter solenoid kit as well. If you could elaborate on what I could use the button for after reading up on what I have, I would appreciate any further replies. I also intend on buying the turn signal/brake lights that are very minimalistic and he has recommended on another video I believe, think they are made by BULLET and sold on Revival Cycles as well. With 4 of those I could cover front and back lights and keep my stock headlight to start, run about $73 a pop
@lumberjaxx3335
3 жыл бұрын
@@nathanmason522 If you already have the switches you could do this : Buy the M button, connect each wire from the m button to one switch (the cables are named after their exact function, turn signals, horn, starter, low high beam etc. Afterwards you connect the one left cable with the aux. connector on the m unit. The m button helps to reduce wiring, so from the handlebar only one thin cable runs beneath the gas tank to you m unit. The M Button helps to reduce wiring to an absolute minimum and helps to keep a clean line with almost no cables between the seat and the handlebar (only those for the coils etc.)
@chrissnatchko7795
11 ай бұрын
I tried to use one on my gs450 and it wouldn’t work. It was like the bars wouldn’t shield it like they were supposed to. Then a year in my m-unit shit the bed as soon as motogadget implemented their new fee. The logging functions never worked again even though I paid their new $8.99 yearly fee
@martinmoss317
4 жыл бұрын
Those four wire connectors state that for multi core wires, they should be soldered before they are pushed into the connector. Solid core wires just push in.
@915greenhornet
9 ай бұрын
Got my munit blue on my bike powered up and the bike started. Still waiting on pushbuttons for my handlebars to get the m button hooked in. But much appreciate the videos.
@davidaldrich3488
4 жыл бұрын
My nephew and I have been totally redoing a 1970 Honda cb350 since last November .......... I purchased a m-unit blue to put in this bike....We are done with the mechanical part including upgraded carbs and an electronic ignition system....Left to do is the wiring of the bike to include the m-unit blue.....I know nothing about motorcycles, have never been on one as a rider or as a driver....)Note: Recently took and passed the state basic rider course as my first attempt)....My nephew has wired one bike with a wiring harness and no m-unit blue....With all of this said your timely wiring here in this U-Tube has been our bible to get this done.........Not done yet and will keep you posted on results......TY TY TY TY TY
@davidaldrich3488
3 жыл бұрын
well...8 months later and we attempted to hook up system and turned it on but nothing works....will back tract to this video again and check every wire.....my oh my
@marklooopy
4 жыл бұрын
You’re a real one for making this.
@billyhova21
3 жыл бұрын
Fr
@boonacka
2 жыл бұрын
Thank the lord for this video! Racked my brain for days trying to figure out how to utilize stock controls for the headlight. Wholetime, the logic was so simple. Thank You!
@bigappa1862
Жыл бұрын
I wondered why make it signal to ground but it makes sense if you want to reduce the number of wires used. I was skeptical when I saw the price tag but its literally a modern ECU. Ill be ordering one and watching this video about 100 times. Thanks bro!
@shaun4164
4 жыл бұрын
You make it look so easy, ive wanted to change my honda to a m unit for a while but im not the best with wiring, scared ill make a mess of it lol Great video as always thanks
@supersportimpalass
3 жыл бұрын
Go for it. Would be hard pressed to find a better video to follow other than maybe something from Revival Cycles.
@porschetarga4s
2 жыл бұрын
Thank you very much for your explanation! It really helped a lot! I configured my kill switch like you told. But after updating my m-unit blue you can change the kill switch behavior from NO or NC contact. So it can now be done with the m-unit! It works for me.
@MG-we9np
Жыл бұрын
Update the blue unit as in the phone app? U can switch it in the app?
@porschetarga4s
Жыл бұрын
@@MG-we9np In the phone app there is an option how you would like to use that contact now. During your video that was not an option. So you don't have to do it with the wiring anymore. I think this is what I meant when I wrote the comment.
@MG-we9np
Жыл бұрын
@@porschetarga4s cheers Nick 👌🏼👍🏼
@johnbirch9800
8 ай бұрын
The most comprehensive m unit install I have watched! And I have watched a lot of them! For someone who has limited wiring knowledge Ive found the Revival cycles vids good but they seem to concentrate on the M unit not what you do if you want to retain existing switches. Thanks 10 out of 10
@Dielman95
2 жыл бұрын
watched this like half a dozen times while wiring my '81 Virago XV750. You're step by step explanation is fantastic
@pichacker
2 жыл бұрын
Nice well documented video. As a techy I like the idea of the m-unit. With respect to the "Kill" switch, the route you have chosen is by far the best. As this is an emergency switch it needs to be fail safe in operation. There is no substitute to a mechanical device in the feed to the coils as a last resort. The m-unit is of course solid state and as such could fail in such a way as to not turning off the ignition feed. Also the kill switch was designed to handle a set amount of current. This current keeps the switch contacts clean and working. It is known as a wetting current. The input to the m-unit is unlikely to satisfy this requirement and could have caused an issue at a later date given climatic conditions (salt, rain etc) on the kill switch. Keep up the content...
@TheDynaGuy
Жыл бұрын
You can also buy those ratcheting wire crimpers at harbor freight. Exact same item mine has held up really well through a ton of abuse
@wideguy7789
4 жыл бұрын
Thank youuuu. Been sitting in an m unit for a few months want to switch my 86 cb650c to LED. This video is really helpful!
@brettp7228
2 жыл бұрын
This was great. Do one every couple years as manufacturers change their lines, parts, etc. so we can keep up on the goods and bads. Good work here!
@SteffanoDucati
3 жыл бұрын
That RR needs to be out in the fresh air somewhere .... :) M- Unit does not function with latch type switches. Momentary signal switches only as you are aware. GOOD JOB working your way around it . I did same thing with the Kill. Re lighting circuit I originally was doing likewise however chose to by pass the m-unit HB output and power the HL with constant power out of ignition via the stock HD key switch which has a 2nd position to power the HL circuit . The customer wanted keep these functions to stock. PS I ran both front and rear brake lite lines into the the brake input on the m-unit .
@fitnessinyourmouth5363
3 жыл бұрын
Ive had my M-unit on my Triumph Legend for almost two years so far and I love it! great vid man.
@rupertpupkin92
4 жыл бұрын
This helps so much. I'm gonna watch this many times over. Incredibly thankful! Bought an M-unit Blue and the wire kit etc about 3 years ago and it's still sitting in the box lol. Might finally be able to move my Ducati Monster 600 -95 out the garage (aka living room). Best wishes from Sweden.
@eidrag
3 жыл бұрын
lol I also have m-unit blue sitting for 3 years already, wiring feels daunting, luckily he showed step-by-step process
@wolfcomer69
3 жыл бұрын
I use hockey tape on my wiring harnesses very similar to the tape you use but cheaper
@stavropulos
3 жыл бұрын
Is there a company who makes/sells the under seat tray for the 550? Thanks!
@glb_tvlr
3 жыл бұрын
That's what I want to know, too!
@christophfurlinger7408
3 жыл бұрын
Love your videos but allow me one comment as an electrician: When clamping a wire with a screw, you HAVE TO use a ferrule, otherways you would destroy the strands. BUT When sticking a wire into a spring clamping terminal (such as the m-unit is using) you must NOT use a ferrule. In theory: The connection doesn't get stronger as you said, but weaker, as the spring is not strong enough to deform the ferrule. So the "clamping-area" is small meaning the force it is able to transfer is also small(er). A smaller "clamping-area" automatically means that the current-density is pretty high at the clamping spot. And THAT means that that spot could get reeeeeeally hot once the output of the m-unit has to deliver the 10(20)Amps it is capable of. tldr: You are risking burning down your bike. For the rest: keep up the good work!
@ianbartlam5338
4 ай бұрын
Dude that was brilliant to watch and now makes the goldwing trike wiring so much easier thank you
@Martin_IPL5990
3 жыл бұрын
Excellent reference video. One I shall be watching and rewinding an awful lot given the mess of a bike I've recently bought. Many thanks indeed.
@dualstand1406
15 сағат бұрын
Please make a same video on Royal Enfield GT or Interceptor 650 cause there's a confusion on my mind about spark plug, TPS and fuel injectors connections with M-Unit.
@daveco1270
3 жыл бұрын
Those M-Units are pretty cool. I have no plans to put one on my CB750, but this video was helpful in understanding the wiring system on my bike.
@houdini1986
4 жыл бұрын
Taylor, many thanks...amazing to have this very well described! BUT be careful I pretty skeptic about idea to hide REC/REG under the seat into that tray! This may end up in fire!
@bonsaitigerMTB
2 жыл бұрын
because it gets very hot? where is a better location?
@ImCodyReyna
11 ай бұрын
@bonsaitigerMTB could mount underneath electric tray for airflow. Then drill a hole on tray where water would be hard to enter, use a grommet and seal. That's what I'm doing
@vintageirish9006
3 жыл бұрын
Fuse box in my 83 cb650sc shit the bed…having trouble sourcing one so think I’ll go this route. Have a feeling this video will be a big help lol
@brianhinojosa1768
2 жыл бұрын
Just subscribed! You explain everything so clearly and make it all seem easy! Then I get out to the garage and start screwing up my bike and it becomes clear how skilled you really are! You could and should have a TV show!! Thanks for sharing your knowledge
@rogerbinny1996
3 жыл бұрын
What battery are you using and do you have measurements for the tray please ..
@LARGO125
3 жыл бұрын
Thinking this will be a must buy upgrade when I do my Virago chopper build. I heard you discussing this unit on the 5 dirty bikers podcast. But seeing it has me sold.
@swordsmith7740
2 жыл бұрын
Hey Taylor, I have an 84 VT500 Shadow. The junction box (ignition/dash/lights) fried at the main hot/ground terminals. Is the M Unit the best replacement for this? Are there other options as well?
@ticosandoval
4 жыл бұрын
Seriously fantastic explanation of the M-Unit/wiring w/stock Honda components.
@matthewsalvador9783
3 жыл бұрын
My wire harness is all kinds of wasted... this video will help me fix the rat ness of wires. Thanks
@topmastermind
3 жыл бұрын
Sweet.. I wish this stuff already available when I did my project way back 2012
@garyalbers7237
2 жыл бұрын
Appreciate how you explain everything,what a blessing to find this.
@kevinmccreary3123
4 жыл бұрын
Always look forward to your videos 🏍🏍🏍Big fan of munit to me seems like overkill given your utilizing key, headlights, kill, ignition, horn switches etc. That said if you want to keep OE looking, lots of good work arounds. Keep up the great work.
@kverke5864
3 жыл бұрын
For me this video have been very helpful, thank you Classic octane for very good job.
@jimrawlings8567
4 жыл бұрын
Love your videos and the technical side of the M-Unit, looks really good for a custom set-up. I’m just not really understanding what it save in terms of wire runs and connections. Especially if you have a new loom. Not hating just curious.
@GTMarmot
3 жыл бұрын
I don't like it either. Nothing about it looks straightforward. And people fit them to classic bikes, as if to say a points ignition system and basic wiring loom with relays and stuff is more complicated than an M-Unit. I mean, just look at it. How does that simplify anything.
@scottminshall6420
4 жыл бұрын
Cool video, I might need to get a M unit for my 82 GPZ 550 that I want to restore.
@natec7398
4 ай бұрын
Awesome job man. You’re a natural teacher. Would this be the exact same for a CB750?
@DutchedShedBuilds
3 жыл бұрын
Great tutorial, thank you for helping us out with the task of wiring our old honda/suzukis . Any possibillity that you could show a m-button addition to this?
@fredericnadeau8386
4 жыл бұрын
Haven't even watched the video yet and I'm really excited that it's quite long! I'm sure it'll be so helpful
@PeterVdS76
4 жыл бұрын
Hi, Been following your video’s for A while now from Belgium and really like/appreciate them. On this one however I have a small remark which I can’t refrain from making. Namely that WAGO and other style clamps are used for in house use and to my opinion should not be used in A bike or any automotive stuff. No pun intended btw! Other then that still liked the video very much and found it clear video on m unit install. Rather solder connection on bikes and use heatshrink to protect. Btw .. difference between yellow and orange clamp .. yellow only for solid core cable, other can be used for woven copper cable. Keep the nice content coming ! ;-)
@kultbotcustomshop3849
3 жыл бұрын
Man , what a damn life saver you are sir . A super salute to you !
@JeshuaAdorno
Жыл бұрын
I know I am probably really overthinking this, but can I essentially do this same wiring diagram with a regular fuse block and relay? Wire fuse block from ignition to main Then out to ignition To headlight/taillight constant Left side wiring Right side wiring
@adamrez9754
2 ай бұрын
Question. I am installing a new ignition to my honda cb650. This ignition has 3 cables. 1 to battery 2 ignition without light 3 ignition with light. Obviously battery goes to battery. Hoping you can till me where to connect the other two. My old ignition was just two cable. One to battery and the other I had into lock and it did the trick.
@BrianWood
2 жыл бұрын
This is what I would like to do on my CB450. This wiring looks like it can be a real headache.
@scowlsmcjowls2626
10 ай бұрын
Why is only a rare comment asking about ignition ignitet box cdi etc..? Thought that might be kind of important...
@Up-hill-Battle
8 ай бұрын
Isn’t the regulator rectifier supposed to stay cool? It needs air flow and should be mounted where it can get it or it’ll get hot I thought?
@TheFinlaybob
4 жыл бұрын
They are boot lace crimps loving the m unit by the way and this video keep up the really good work G
@christianfranco479
3 жыл бұрын
Dude you're a life saver. thanks so much
@manfredmader9837
3 жыл бұрын
Hello there, like the video can you please let me know if you can use the M-Bottom module with the OEM switches and run only onesignal wire back to the maim M unit. let me if you have an answer Thanks
@LuisGGomezPhoto
4 жыл бұрын
Hey, a great course on installing the M-Unit.Thanks so much. Stay safe.
@l6s5g0
Жыл бұрын
Are you telling me that I can toss out my 85' 454's harness and pop this kit in ???
@rubberlover666
4 жыл бұрын
Thinking of running this on my CB650c chopper build because even though I’m taking the bike down to the basics, I’ve never messed with wiring before and would like to see in advance where I’m messing up and what’s wired totally wrong.
@eddieroy1682
3 жыл бұрын
I am try to install the m unit on my buddys 1982 virago 750 but I having a problem wiring the regulator and the stator I don’t understand the wiring process on this part please help thank
@comfysofa1549
Жыл бұрын
Thanks very much for putting up the vid.....im gonna have to watch it a good few times....just about to start re wiring my late fathers 400/4 - i must confess i do feel like ive got a lot more wires in the headlight area....!! - im using all the stock guages and switchgear though...
@pifficus1
2 жыл бұрын
excellent vid. hopefully going to pick up a project bike this weekend with one of these. thanks again
@LordPenny95
6 ай бұрын
Could you ground one of the green wires from the rectifier to the frame?
@Michael-yq9jn
3 жыл бұрын
This video is gold! Thanks for sharing that!
@carolaschultz1175
2 ай бұрын
Can you help me with how to integrate the spark unit in the wiring diagram of a Honda Shadow vt750c '84. Everything is working wel, i only don't know how to connent the spark units and coils with an m-unit. At revival they have a schedule from m unit to a relay to spark units (cdi) to the coils. But how to do that with my bike?
@SpookyInBed
Жыл бұрын
Wait.. that tiny battery is.. the motorcycle battery? I didn't know they can be that small? Can they be used for a 1989Honda hawk nt650 ?
@VictorTorres-ce7bl
2 жыл бұрын
I’m having problems with the rectifier if you can help me out. Thanks
@steveedwards1214
3 жыл бұрын
Will the neutral and clutch switch still function, i.e. the starter motor wont function if the bike is in gear?
@syedajmal9870
3 жыл бұрын
Which anti gravity battery do you recommend. I have a Home CB400F. I’m doing same thing just don’t know if should get a cell 4 or 8 small case from them.
@terrycarter1061
5 ай бұрын
So glad I found your video. Is the tray that’s holding everything battery etc. is the tray factory or aftermarket?
@scowlsmcjowls2626
10 ай бұрын
Any advice if i press the start button and it rings the doorbell on my house
@dualstand1406
8 күн бұрын
can it be installed in Royal Enfield classic 350 bs3 2014( Indian) model?
@oliverthejeep6040
Жыл бұрын
Have any tips for putting in an m unit blue with push buttons switches, BUT with the good ol CDI that sits on top of the battery.
@Reedith
2 жыл бұрын
So it just needs 12 volt ? Wonder if there's any reason I can't install this into an electric bike ?
@JoeCerc
Жыл бұрын
I’m working on an ‘83 Honda cb750f. Would I only need to plug in the yellow/red wire from the starter solenoid into the m unit, like you’ve shown? My solenoid has six points, as opposed to yours only having two.
@deanenwright6142
3 жыл бұрын
Thx for the vid...will be wiring my cb750 with a m unit basic and this will help!
@countrytoad5343
3 жыл бұрын
I'd like to get an m unit and the module for my time to 5:15 1974 I was going to get a press down electronic ignition but I think I'll wait and try and make the trade was bending that metal with some the hand tools I got I have some other batteries battery plus it's right down the street
@gilsonlima2689
7 ай бұрын
@Classic Octane, where can I buy a lithium-ion battery, or a link from where a can order it.
@inspectorchicken
3 жыл бұрын
Regarding the kill/start switch, could one also just connect the "on" position to the ignition key, so to start the machine you need the starter switch to "on" and have the ignition key to "on". And only if both are "on" you can ground the actual starter switch?
@DefaultYoutubeUserAccount
2 жыл бұрын
Excellent video, I hope I'm able to take some of the information in this video and use it for when I rewire my Ducati S4R, if I ever dare to do it!
@andrewbower5186
Жыл бұрын
What amperage fuse did you use? I'm doing a 1980 Yamaha XS650, and am wondering what fuse I need.
@scowlsmcjowls2626
10 ай бұрын
When the vid start and you have the m unit in hand it wud be a good time to describe what it is what it does and does not do before ppl think they can rip out the whole loom off the bike man some heads in hands😂😢
@AZ-qn3xq
Жыл бұрын
Hello. Awesome tutorial! it is almost 2 years old video. Is there any updates? Maybe new technologies? Thank you.
@fabioakaNoiser
4 ай бұрын
Hello there! First of all, thanks a lot for your video! Quick question, following this setup is it possible to start the bike without keys using the keyless start? I tried but it won't start -_-
@lyenrouillon9010
6 ай бұрын
I am doing a full rewire on a CB 750 k2 and I am using an m-unit blue with a mo.button but keeping my old starter solenoid, I got a motogadet cable 8awg with a built in 40 amp fuse can the ground cable be 8 awg or does it have to be 6 awg also my new reg/rec only has 7 wires. can supply photos
@oliverthejeep6040
4 ай бұрын
Have you ever had an issue with the rectifier overloading or sizzling. Currently having that issue
@timwaldram5619
4 жыл бұрын
Really clear instructions and very well explained. Well done. Just wondering whether mounting it closer to the front could reduce the wiring runs even more for a super-neat setup?
@mtzkid64
8 ай бұрын
What cell size are you using for the battery? I’m currently building a 79 gs750. Great video love the detail
@aaronantolik7406
2 жыл бұрын
Hey, do you have a wiring diagram for a 82 xv750 with an munit blue?
@johndavidministries6077
3 жыл бұрын
Hey! Trying to get one wired don’t know how to wire coils. Can you give me some help!
@Vetea19
2 жыл бұрын
The capacitor is in option. What is it's usefulness ? !thanks
@JAHAENMOTO
4 жыл бұрын
Amazing job bro! Greetings from Paraguay
@ianbartlam5338
4 ай бұрын
How does the fuel gauge and sensors connect into the unit ?
@johnbirch9800
7 ай бұрын
Hello Taylor, I have bought anM Unit Blue and I have been told that to retain the original Honda switches I need to change the switched lives Honda uses to Switched earth and also change the M unit to deal with that. Do you have any information on this change on the Bike? and or the M Unit? Thanks John
@kyleharay6759
2 жыл бұрын
Hi I know you posted this video a while ago but if you see this, when you wired the key you left the two brown wires unused. I tried to do it the same way. My m unit will only turn on when the key is in the accessory position.
@soanzin
Жыл бұрын
This m unit works only in motorcycles with carburetors? Can I install one of that in a pgm-fi motorcycle?
@BrittBraap
2 жыл бұрын
This video helped me SO MUCH!! Thank you so much for your help.
@erikpedersen8715
4 жыл бұрын
I have a 1973 CB500 four with kick start and I am trying to get the clutch to function. I am having trouble with the clutch cable and the mechanism for it that sits behind the cover where the gear selector is. If you could help that would be amazing, thank you.
Пікірлер: 305