Excellent video. Love how specific you are with each step. Keep all your videos that way!
@MustardBikes
3 жыл бұрын
Thanks for the feedback William!
@alashish
3 жыл бұрын
Thanks a ton for this
@ondank
3 жыл бұрын
This helped me with an entirely different installation I had to do, top draw video. Shame I can't get one of these tail tidies in Europe too
@MustardBikes
3 жыл бұрын
Glad it helped ondank! We do ship to Europe next time you are looking for a fender eliminator.
@coodwasch
3 жыл бұрын
Dzięki za ten film! Doskonały, gdyby nie twoje video pewnie połamałbym zaczepy od tylnej owiewki ;)
@MustardBikes
3 жыл бұрын
Your welcome! Glad it helped :)
@tonitomas91
2 жыл бұрын
This video made the installation super easy, thank you so much. Extremely happy with the quality of your product as well! Little side note: the LED plate wires connector has been changed on the 2022 model, therefore i wasn’t able to connect the black and red wires to the bike loom. I’ll have to buy the proper connectors and crimp them to the tail tidy black and red wires.
@alphonsogerman8991
2 жыл бұрын
I’m about to attempt this on my 2021 do you know if the 2021 model the same way ?
@ozpilotgirl
3 жыл бұрын
Really comprehensive video. Thanks!
@MustardBikes
3 жыл бұрын
Thanks Christine! Glad it helped :)
@pingumoto9126
5 жыл бұрын
Hi ! Thank you for this really good video !
@hawkrunningbear6849
3 жыл бұрын
exellent installation video well done.
@MustardBikes
3 жыл бұрын
Thanks for the kind words!
@SClown86
5 жыл бұрын
Great installation video for a great product.
@MustardBikes
5 жыл бұрын
Thanks for the feedback!
@bwibrand3135
5 жыл бұрын
perfect video.
@robinsattahip2376
3 жыл бұрын
Thank you, is a Kawasaki Z250SL similar? I hate those rear ends that look like the Coyote's nose in the Roadrunner cartoon. When did the Japanese start competing to see who can make the silliest-looking motorcycles? Good job, a real improvement.
@MustardBikes
3 жыл бұрын
Hi Robin, Unfortunately this product does not fit the Z250SL but we do have a product that does. Fitment is very similar.
@p.santos6644
5 жыл бұрын
Nice video. Thanks a lot.
@adrian9422
5 жыл бұрын
Thank you for the tips and help :)
@MustardBikes
5 жыл бұрын
Glad it helped Adrian!
@tonidiaz4961
5 жыл бұрын
Very good video. The two male faston light terminals are 2,8mm , 4,8mm or 6mm?
@MustardBikes
5 жыл бұрын
Hi Toni, The plugs come pre-fitted to the product when you purchase it.
@raylight9258
4 жыл бұрын
👍👍👍
@MrWhellum
5 жыл бұрын
is this product adr complient?
@MustardBikes
5 жыл бұрын
Hey Whellzy, why we do not apply for ADR compliance papers on our products due to costing reasons, we design all our products as per the ADR design rule requirements. As such, when installed correctly and along with a reflector (we sell a bolt on kit) there should be no reason your bike would fail an inspection.
@focus0nme
4 жыл бұрын
Do you think this kit will fit my ZH2? They share a ton of similarities with the z900, if needed, I can be a tester ;)
@MustardBikes
4 жыл бұрын
Hi Brandon, We have had a few customers fit these to the ZH2. Apparently the plug for the wiring is different but other than that it fits straight up. Hope that helps! (and if you can shoot us a picture of the plug we can see if it cross refrences with any of the other plugs we use!).
@baditteer
4 жыл бұрын
what does your bike look like with the plastic frame covers removed?
@MustardBikes
4 жыл бұрын
Hi Frank, unfortunately this is not our bike. It was on loan from our local dealer and has since been returned. Sorry we can't help with that one!
@gazakelly9266
3 жыл бұрын
Don"t see how the indicators will be water tight 😙😭
@MustardBikes
3 жыл бұрын
Hi Gary, they aren't supposed to be, and aren't from stock either. In fact if you look at the bottom of the indicator you will see a small cutout in the edge of the lense that kawasaki designed as a drain hole should water enter the indicator. The indicator on our product are mounted in the identical manner that Kawasaki mounts them in the stock fender.
@gazakelly9266
3 жыл бұрын
@@MustardBikes Yea but the tail tidy is open to the elements water splashing up from the wheel and entering the indicators from the wires " the stock part is water 🤸 tight from rear wheel spray 🏍️ cheers Gary
@MustardBikes
3 жыл бұрын
@@gazakelly9266 The indicators have plates that cover most of the opening to them, and it's still irrelevant. The indicators are designed to get wet. The stock fender is enclosed purely from an aesthetic aspect and has nothing to do with keeping water out. This is very apparent if you look across their range, in particular earlier models. The 12-16 ER-6 for example is completely open underneath just like our fender eliminators.
Пікірлер: 35