Hi Tom, I've just installed the hardware for a Nicholson style vise, the next task is to fit the tenon to support the other side. I've already drilled a hole for the mortise, but wondered if there would be any disadvantage to fitting a dowel rather than chiselling out the mortise and fitting a square tenon?
@theUnpluggedWoodshop
7 жыл бұрын
Great question...without trying it I can't say for sure; but thinking about it this second, it may work just as well. The only thing is the boxing in the back may be a little more difficult. We just recently boxed in our parallel guides to help them run smoother and prevent them from sagging- worked really well. I suppose you could install some blocks behind the apron and drill the same size hole through for an easy way to create the blocking. best of luck with the build!
@giorgos424
7 жыл бұрын
Had the same exact thought! Please do let us know if you end up trying it because I have a hard wood dowel in hand (used to be an old tool handle) and I would love to use that!
@electroritz
7 жыл бұрын
I plan to give it a go tomorrow, I'll let you know how it turns out! My plan at the moment is to make one block, screwed to the underside of the top surface, with a hole drilled through it to support the dowel, probably placed 10-15cm from the inside of the apron on my bench. I think I'll also cut the dowel 10-15cm longer than the threaded screw on the vice, that way it shouldn't come out of the block even if the jaws are at max opening. I'm not sure if it'll give enough support - certainly won't be as sturdy as boxing in the guide as Tom describes.
@electroritz
7 жыл бұрын
Mostly successful... A few things that I learnt along the way: 1. Sanding the length of the dowel - except the section glued into the jaw of the vice to slightly reduce the diameter and the inside of the holes through the apron and the supporting block helped it to move more smoothly. 2. Applying wax to the dowel also movement. 3. Fitting the block was mostly trial and error to find the right place. 4. Buy your dowel then drill the hole... don't drill a hole then go and hope there's dowel that fits!
@giorgos424
7 жыл бұрын
electroritz thank you so much for the update mate!! do you feel that the vice is at all wobbly or do you still get a strong hold? does it stay parallel to the bench? can you grab pieces of wood on the outer side of the screw without loosing the parallel holding? And finally, regarding the supporting block, I am guessing that it just has the same diameter hole drilled into it?? Sorry for asking so many questions, but I'm just so excited that someone actually went ahead tried this with a dowel!
@rickgreen9936
8 жыл бұрын
Thank you. All good, the craftsmanship, the music, the vice. The in & out focus...well maybe not as good, but it is great to see you again.
@maddiemoskala7254
5 жыл бұрын
I just got your books not realizing it’s you. They are amazing. You are amazing. I can’t wait to learn this beautiful craft. As a purist, your “unplugged” style really appeals to me. Thank you for sharing your immense talent with us.
@theUnpluggedWoodshop
5 жыл бұрын
Thanks Maddie- happy you're enjoying the work. all the best in your creative journey.
@marcmoquin3735
4 жыл бұрын
How can anyone give this a thumbs down? Tom is full of helpful information, is a very talented musician and has a very meditative and humble style. Thanks Tom.
@NickedBlade
8 жыл бұрын
I enjoy watching you work and to hear you talking about the project was a nice upgrade to add to this. As far as the focus issue, everything starts out a little foggy and soon becomes clear if you are patient enough. Thanks for posting this and have a wonderful life!
@theUnpluggedWoodshop
8 жыл бұрын
+Fester Adams Many thanks!
@jram1852
3 жыл бұрын
OMG I was blown away by your skills, all hand tools great job!!
@billrogers6256
5 жыл бұрын
Half way thru this video.... May I say sir what I have seen is very simplistic as well as elegant, this was a beautiful build. I should also mention I hope you have many more downloads ahead as I will be watching...for I now I am subscribed.
@bearkatwood6354
8 жыл бұрын
The work space looks great, lots of room and light. Thanks for the video. Great to see your stuff again. Thanks.
@angeloluigivilla6510
6 жыл бұрын
BearKat Wood buona L’idea ma pessimo il formato. Forse bastava licenziare il cameraman e impostare la fotocamera sull’autofocus
@jeffw2055
8 жыл бұрын
Great simple vice. I love that you brought out the razee jack plane at the end. Building that plane from your book, The Unplugged Workshop, changed my woodworking forever. Thanks for your inspiration.
@theUnpluggedWoodshop
8 жыл бұрын
Thanks for the comments Jeff! Very much appreciated~; )
@tkotanko
8 жыл бұрын
First off, so happy to have another KZitem video to watch! I can't even express how cool that live edge turned out. I love it. It allows for rustic to meet reformed. One day..... One day I'll get up there for some classes!
@theUnpluggedWoodshop
8 жыл бұрын
+Tim Kotanko Thanks Tim! Very much appreciated. I hope you do make it up this way one day. all the best to you~
@billonthehill9984
5 жыл бұрын
I'm late to the party. That is one beautiful & well made vise by hand. Nothing not to like here, very well done... Bill on the Hill, Vermont, USA... :~)
@theUnpluggedWoodshop
5 жыл бұрын
Thanks Bill!
@mytubetuning
8 жыл бұрын
Great to have you back here Tom! Bit dizzy after this one, but still enjoyed it!
@neilatkinson174
8 жыл бұрын
Im not a woodworker by and slip of the imagination, i only have the brain capacity for metalwork, but i love the videos, seeing everything done with hand tools and the chilled soundtracks too. Much respect to you sir.
@theUnpluggedWoodshop
8 жыл бұрын
+neil atkinson Thanks Neil- very much appreciated!
@neilatkinson174
8 жыл бұрын
+Tom Fidgen very welcome
@robertwilson4704
6 жыл бұрын
I believe that I am over thinking my vise setups. You make it look so easy.
@neddieken
8 жыл бұрын
just love the simplicity of your work, I'm kitting out my own back garden workshop at the moment and your clips have really inspired me to altering my tool choice.
@theUnpluggedWoodshop
8 жыл бұрын
+Edward Kennedy good to hear- many thanks and best of luck with the new shop.
@sausageseggandchips
8 жыл бұрын
I really, really enjoyed watching that. It complements Richard Maguire's english workbench series nicely (which I've just finished). Lovely light in the workshop too.
@jomorris1022
8 жыл бұрын
Its good to see another of your videos Tom, and I am happy that you are using your talents to pass them on to others, because working wood by hand should be taught first before you use power tools. Working by hand brings you in better contact with the wood and what you are trying to make.
@theUnpluggedWoodshop
8 жыл бұрын
+John Morris Thanks John- great points. Much appreciated!
@scott8351
2 жыл бұрын
This is the best simplest vise I have seen. I have a yost quick release metal vise I dont really like. I am going to add this one instead.
@XavierAncarno
8 жыл бұрын
So soothing, I like the music and the melody played by your tools, especially the wood shaves while you drill Thank you and greeting from Paris - France
@ronin4711
8 жыл бұрын
Tom, as expected from you, even on a simple device, first quality precision craftsmanship. Thanks for sharing...
@snowwalker9999
7 жыл бұрын
I wish I lived closer to your woodshop and attend one of your workshops at least every month!
@cralobo
8 жыл бұрын
Hello Tom. Thank you very much for enlighten in the art of wood. I'm light years of good technique, but with your videos encourage me and make me be more detailed and clear taste for working with wood. You get a strong hug from a beginner really like your videos. CDMEX. David.
@theUnpluggedWoodshop
8 жыл бұрын
Thanks David!
@SeaOtter65
6 жыл бұрын
Really like the simple way of building
@theUnpluggedWoodshop
6 жыл бұрын
Thank you-
@pplemens2
8 жыл бұрын
I LOVED the cool out of focus stuff. I get it!
@imillsie426
2 жыл бұрын
Great video! Just used this method to install a tail vice on my bench. Works great. BTW, using guides not only to provide side-to-side support for the tenon, but also underneath it to limit vertical drift, seems to help prevent racking.
@elneno82
8 жыл бұрын
Thanks for such a great video. It came just in time, I'm starting my bench construction this sunday!
@theUnpluggedWoodshop
8 жыл бұрын
+Nicolás Salgado excellent~ happy to help!
@nbkcl3f
4 жыл бұрын
Thanks for sharing ... this is going to be the next addition to my bench!
@jeffreymilarsky3246
2 жыл бұрын
Love it. Awesome work! Simple, pure, and great craftsmanship!
@WoodByWright
8 жыл бұрын
Love it Man. that is a great vice to learn on. Really got to make the trip up there some time! keep it up man! good to have you back!
@tomlagatol4448
8 жыл бұрын
I love watching you work, great video! (Please have who's ever behind the camera to FIND THE FOCUS!)
@millsbrian55
8 жыл бұрын
Another beautiful video, Tom. Thanks! Honest feedback - the lack of focus control was driving me crazy.
@traditionalarcher5678
7 жыл бұрын
I have to definitely agree.
@hiram1115
7 жыл бұрын
Brian Mills holy shit i had to skip video due to lack of focus. at least i learned what its called. maybe someonw else made a more in focus video.
@philipmay3875
7 жыл бұрын
The video was out of focus? What a relief, I thought it was me. I'm going to install this on my own michelson, and I'm going to put a big number 6 on the apron, so it will look just like Tom's.
@bocfus72
7 жыл бұрын
Great video, nice to be able to put a voice to the face, keep up the great work!
@theUnpluggedWoodshop
7 жыл бұрын
Many thanks~
@cavamanara
8 жыл бұрын
I like all it. The only thing I would not use, if I make a video like this, is the "focus effect". I use glasses and this out of focus effect seens just like my every day struggle to see things. But I love your videos. Congrats!
@aarevalo49
8 жыл бұрын
+cavamanara I think the videographer is trying to do a focus fade as a sort of softer cut to the next scene. I think it would be better to not take so long focus-fading to the next scene. I agree that can get a little annoying at times.
@koboskolors
8 жыл бұрын
Oh my, he's back!!!! Thank goodness.
@timpedzinski230
5 жыл бұрын
I'd like to take 2 exceptions to the install. #1 You mounted the flange on the chop with the ears horizontal. Shouldn't they be vertical to give more strength and support to the chop when clamping a piece along the top of the vice? #2 the tapered flange nut under the bench was mounted facing away from te chop. If the tapered flange was set into the inner jaw (bench side) it would add more strength to support the screw. By reading the comments below I can see we have a battle of age groups with the focus techniques. those of us old schoolers like to see what is being presented while the younger viewers like the in focus out of focus art form.
@SeaOtter65
6 жыл бұрын
You are a true master crafter
@garywilliams3412
8 жыл бұрын
For me, this vise makes more sense than the leg vise found on the Roubo. I will try this one. BTW, impressive school. Thank you.
@theUnpluggedWoodshop
8 жыл бұрын
Thanks Gary- this vice is very accessible. We enjoyed making and using them at the UW Toronto. all the best~
@crazytimber1767
8 жыл бұрын
nice job you schould check out my channel would be cool
@norm1124
8 жыл бұрын
Nice to see you back on the channel.
@theUnpluggedWoodshop
8 жыл бұрын
+norm1124 Thanks Norm!
@lukasschmitt
Жыл бұрын
Wow, this hand thrill cuts crazyly fast.
@marekl7485
7 жыл бұрын
Properly hand made, nice job, thanks for sharing!
@AdamCraigOutdoors
8 жыл бұрын
world class video's and craftsmanship. love watching your video's. Thanks again!!
@theUnpluggedWoodshop
8 жыл бұрын
+Adam Craig thanks Adam!
@johngriffiths689
8 жыл бұрын
Yes and great music too
@theUnpluggedWoodshop
8 жыл бұрын
Thanks John!
@johngriffiths689
8 жыл бұрын
Tom Fidgen deserved
@paulcounsell2556
8 жыл бұрын
Great vid. I am going to add same to my bench. Exact same hardware available here in Sydney from Carbatec 'Tools for Wood' for $47 AUD so can't get a great vice much cheaper than that! Lovely to see the all wood jointing plane being used. I occasionally build a stave shell snare drum (custom orders only) & I have an all wood smoother to which I've radiused the sole & cutting iron to finish the inside radius of the shells. My other planes are all Stanley Sweethearts low angle block, smoother & low angle jointer (unfortunately I can't afford Veritas or Lie Neilsons ) but I love my block plane - the extra weightiness & low angle cut just 'feel' right in my hand!
@theUnpluggedWoodshop
8 жыл бұрын
Thanks Paul- maybe we'll catch up on my next trip down under. I would love to visit Sydney one of these years. Do you have a website showing your work? I'd be curious to see the snare drums. Sounds like you have a nice hand plane collection on the go-; )) watch out- it's a slippery slope! all the best~
@paulcounsell2556
8 жыл бұрын
Hi Tom, I don't have a website where you could see my work, sorry. I do have photos of all the drums, both acoustic & electronic I've built over approx. the last 10 yrs. I also build electric guitars & I'm currently experimenting with Australian grown Paulownia as a tone wood for solid body guitars. You probably have a Fb page so I'll post some pics on mine for you to check out. Yes you are right, it is a slippery slope! She Who Must Be Obeyed (my long suffering spouse) is often at her wits end when she sees another 'must have' hand tool coming through the door! However I have recently admitted to myself that I do have just too many hand planes so two early 1900's British made Record No. 4 smoothers are being sold as I just don't ever use them, they just sit there as I only ever use the Stanley Sweethearts. I've just found a guy here in Sydney who forges holdfasts from 1" round bar & only charges $15 AUD each for them so I'll be using those in favour of the fiddly bench clamps with star knobs that have to be screwed and unscrewed add infinitum. I've checked out several of your vids now and am in awe of the Unplugged Workshop. We visited Canada in 2010 started in Vancouver and made our way by train to Jasper, rental car across the Icefield Parkway and then plane from Calvary to as far east as Montreal. So Toronto and a visit to the UW next time! Cheers
@theUnpluggedWoodshop
8 жыл бұрын
sounds good- indeed, come for a visit next time. cheers!
@woodnerdbill
8 жыл бұрын
Great timing, I just bought this hardware for my Nicholson bench.
@theUnpluggedWoodshop
8 жыл бұрын
+Woodnerd excellent! Hope the video helps. You'll find pdf. and sketch up files on the UW website....follow the links at the end of the video-; )
@letsenjoyyourtime4680
8 жыл бұрын
the art of being woodworking community and thanks for sharing this videos :,)
@andrzej94576
8 жыл бұрын
Very good job. I learned a lot again. Thanks Tom. Greetings from Poland.
@JesemanuelRamirez
8 жыл бұрын
Thank you so much, I've been having trouble with my homemade vise. I'll have to implement this design to my workbench. Thanks again for the video, I was wondering when I would see another one of your builds, hope we can see more in the near future.
@theUnpluggedWoodshop
8 жыл бұрын
+Jesemanuel Ramirez Thanks for the comments- happy to hear this vice will be an option for you. As for more videos, we're working on them-; ) many thanks and all the best~
@HeavyOpera1
8 жыл бұрын
Great to see another video, Tom. Thanks. Enjoyable to watch as always
@gunterschone8402
8 жыл бұрын
Beautiful video, Tom. This type of front bench clamp I did not know until then. You but it looks great, also because of the bark edge
@theUnpluggedWoodshop
8 жыл бұрын
+Günter Schöne Thanks Gunter- the live edge was a nice coincidence. We left it as it will be great when sawing dovetails at a 45 degree angle- the edge of the vice won't get in the way- all the best!
@gunterschone8402
8 жыл бұрын
Aha, okay
@robertbrunston5406
7 жыл бұрын
Thought you went away! Glad your back! Thank you for sharing Tom.
@PeterKlemperer
8 жыл бұрын
Added one of these to my bench using this video as a guide. Thanks so much!
@theUnpluggedWoodshop
8 жыл бұрын
Happy to hear it helped! all the best~
@JuanGarcia-1125
4 жыл бұрын
Qué hermosa prensa te hiciste y qué chulada de viruta sacas al cepillar la madera! Saludos desde Reynosa Tamaulipas México Maestro!
@eduardom800
8 жыл бұрын
Have just started to watch it. Only the music is amusing.... Good job!
@jonathansimmonds444
8 жыл бұрын
As always, just a wonderful lesson. Thank you and keep up the good work.
@theUnpluggedWoodshop
8 жыл бұрын
+Jonathan Simmonds Much appreciated-; )
@gwenhubert7565
8 жыл бұрын
Hi Tom ! Thanks for this nice video ! Great job, great music. After watching your videos, I'd like woodworking in my garage ! Thanks a lot for share your passion & your expertise. It's a real pleasure. PS : Your book is excellent ! See you soon Gwen, from France
@theUnpluggedWoodshop
8 жыл бұрын
Thanks Gwen!
@Kartus68
8 жыл бұрын
I enjoy watching you work. Well done.
@theUnpluggedWoodshop
8 жыл бұрын
+Raymond Charon Thanks Raymond~ good to hear.
@peterflann6175
2 жыл бұрын
nice work, like that style of vise.
@davidclarke5313
8 жыл бұрын
I know it's churlish to complain about stuff you're doing pro bono, but I'm afraid I've got to an age where my eyes provide enough interesting out-of-focus type moments without needing more from arty-farty camera work. Having said that, this is definitely a candidate for my 'shop. I notice that you described it as a "pretty decent" vice, do you have reservations about it or do Canadians do understatement as well as us Britons?
@theUnpluggedWoodshop
8 жыл бұрын
+David Clarke LOL- thanks for the question and comments! Yeah, my eyes aren't getting any younger either-; ) but as for the vice...it's easy/quick and inexpensive to make and does a great job holding. "pretty decent" was definitely an understatement. cheers!
@demsmatoes775
8 жыл бұрын
Good to see you posting again, hope to see more. :)
@theUnpluggedWoodshop
8 жыл бұрын
Thanks! Yes, more to come....
@ZittoRossi
8 жыл бұрын
Boa Noite Mestre Tom, ficou muito boa sua " Prensa de Bancada ", parece que o segredo do bom funcionamento está na corrediça da guia da esquerda e é claro tudo no esquadro. Tudo de Bom para Você !!!
@theUnpluggedWoodshop
8 жыл бұрын
+Zitto Rossi Muito obrigado! tudo de melhor ~
@BrianErnste
8 жыл бұрын
thanks, Tom! I love your stuff but can't afford the subscription....nice to see a video back here again!
@theUnpluggedWoodshop
8 жыл бұрын
+Brian Ernste Thanks Brian! We have a lot of new content planned for the channel- stay tuned!
@JQuacker
7 жыл бұрын
Thanks for the video. It's annoying to see all the negative comments about the focus; that's just part of how video works if you're going to get in and see all the details without stopping and starting on every step. Like paring the tenon cut at 6:50 - you were able to keep going without the cameraman saying "wait, let me re-setup to get the camera ready." You can keep going, we can get an idea of your flow, and the camera is a secondary to the process. Going in-and-out of focus is GOING to happen.
@theUnpluggedWoodshop
7 жыл бұрын
Thanks Jordan- much appreciated and well said. I never worry too much about the negative comments-; ) you can't please everyone! all the best~
@738polarbear
5 жыл бұрын
Very simple beautifully functional.
@rdouthwaite
8 жыл бұрын
Good to see you back dude... I was missing your mellow artfulness ;-)
@theUnpluggedWoodshop
8 жыл бұрын
+rdouthwaite ; ) cheers!
@mightaliphon5556
8 жыл бұрын
Good Job. I'm following from miles and miles away. Mauritius
@terrydavis9600
7 жыл бұрын
Tom. I bought the album. I was asking about the music played during the video. Love the way you handle the tools.
@theUnpluggedWoodshop
7 жыл бұрын
Thanks Terry- this tune is an instrumental I wrote and recorded. It isn't on iTunes but I'd be happy to email an mp3 file to you- email me if you're interested. Send to: tom at the unplugged woodshop dot com cheers!
@terrydavis9600
7 жыл бұрын
Will do
@terrydavis9600
7 жыл бұрын
Tom Fidgen I tried the email a couple of times and it wouldn't deliver. Send if you will to towdavis@hotmail. Com
@hernangiayetto6748
5 жыл бұрын
Every now and then I come to watch this video over again. I've watched it God knows how many times. Your work is incredible. And the music!! I love it. Can you tell me the name of the song? Cheers!
@codyjames7072
8 жыл бұрын
Glad to see you back! ;) great as always!
@thecordlesscarpenter7956
8 жыл бұрын
masterful as always, good to see you again!
@theUnpluggedWoodshop
8 жыл бұрын
+Cordless Carpenter It's good to finally have the time to post new videos! Thanks for the comments~
@rick91443
8 жыл бұрын
"...world class video's and craftsmanship. love watching your video's." Could not agree more...rr
@098751thg
8 жыл бұрын
I always enjoy your approach on projects... so simple and yet absolutely functional, uncomplicated. $300+ Benchcrafted... no thanks, it's a tool, not the finished piece of furniture.
@theUnpluggedWoodshop
8 жыл бұрын
+Helio Thanks for the comments.
@rm42749
8 жыл бұрын
Nice to see you. Good video and music as usual. Thanks!
@theUnpluggedWoodshop
8 жыл бұрын
+bob Last Thanks Bob!
@BDL090754
8 жыл бұрын
Thanks so much for this video Tom, - it is a simplified type of vice that I want to make, appreciated..: )
@theUnpluggedWoodshop
8 жыл бұрын
+Brad Lloyd Thanks Brad!
@athejumper
8 жыл бұрын
Thank you for another inspired video,
@falcondeborba
8 жыл бұрын
Ola, é sempre impressionante ver seus trabalhos com ferramentas tao simples, parabéns. Qual a melhor escolha da madeira para fazer essa bancada?
@theUnpluggedWoodshop
8 жыл бұрын
+Carlos Alberto Falcón de Borba Obrigado. Usamos pinho como a sua fácil de nivelar e manter. Eu sugiro que você usar qualquer madeira é local, inexspensive e prontamente disponíveis. tudo de melhor ~
@falcondeborba
8 жыл бұрын
Obrigado.
@saurios
3 жыл бұрын
Excelente trabajo. Muy prolijo.
@guillermojanner5369
8 жыл бұрын
Beautiful Video, great techniques.
@theUnpluggedWoodshop
8 жыл бұрын
+Guillermo Janner Many thanks!
@AverysMan1105
Жыл бұрын
You made it look easy
@mr.shellcracker9161
3 ай бұрын
Hi Tom. I'm making a Nicholson style bench and just stumbled onto this video. I had bought a cast iron vise, but now I'm thinking about building this style vise. Would you prefer a cast iron vise or this style?
@moonblink
7 жыл бұрын
damn dude, you're a wizard with that chisel.
@diegohperez6434
7 жыл бұрын
tom my question for you i have two of them i work better stead that wood on the other side please tell me i follow you videos those tools you use back in the days but works you very clever thank you
@theUnpluggedWoodshop
7 жыл бұрын
Thanks for the comments- best of luck in your woodworking!
@seaotter52
7 жыл бұрын
Nice video. Popped up in my recommended. Was wondering about who makes the bit. I just have Irwin augers
@theUnpluggedWoodshop
7 жыл бұрын
Thanks for the questions and comments. It's also an Irwin- called a spade bit. You should be able to find it in most big box stores. all the best~
@mprrx
8 жыл бұрын
I will be makimg one. Thanks
@JD_Fidler
8 жыл бұрын
Very cool! Thanks for sharing.
@rodneysmart9774
5 жыл бұрын
Nice vice. Cool music.
@theUnpluggedWoodshop
5 жыл бұрын
thanks!
@jeffforbes3772
8 жыл бұрын
Great vid. Tom. Thanks for sharing.
@theUnpluggedWoodshop
8 жыл бұрын
+Jeff Forbes Thanks Jeff! Very much appreciated~
@Recovery12Life
7 жыл бұрын
i just need this music playing in the background of my life.
@gustavojavierapolinardiaz1036
8 жыл бұрын
ENHORABUENA ME ENCANTAN TUS VIDEOS LA FORMA TRADITIONAL SIN HERRAMIENTAS ELECTRICAS HERA LA FORMA EN QUE NOS ENSEÑO NUESTRO VIEJO PROFESOR EN LOS AÑOS 70 EN LA ESCUELA DE ARTES Y OFICIOS LA MUSICA ES PRECIOSA ¿DE QUIEN ES? SALUDOS DESDE MELILLA PUERTA DE EUROPA EN AFRICA
@theUnpluggedWoodshop
8 жыл бұрын
+Gustavo Javier Apolinar Díaz Gracias por los comentarios . La música es mi sola- yo escribí y grabé hace unos años . todo lo mejor ~
@gustavojavierapolinardiaz1036
8 жыл бұрын
Muy bonita musica
@theUnpluggedWoodshop
8 жыл бұрын
Gracias!
@spudpud-T67
5 жыл бұрын
Have you considered using another drill bit instead of the spade bit. Perhaps its all you have but perhaps you could just touch/ scribe the hole with the spade bit then use a chisel to start the hole then continue with the bit. The tear out shown here is a lot for a nice bench.
@cappaslangmurderer
8 жыл бұрын
There he goes! Top notch
@jeffreydustin5303
3 жыл бұрын
Wonder if there's an easy way to make it a quick release with wooden hardware and wood screw.
@aderftard
8 жыл бұрын
The autofocus lag made this one a bit painful on the eyes. Enjoyed the content though.
@scottverge938
8 жыл бұрын
+Tony Miller. I'm wondering if it was manual focus but yeah it was a bit distracting. I kept trying to blink to clear my eyes LOL
@Psussenes
8 жыл бұрын
+Tony Miller Great work almost made hard to watch due to the focus issues,
@MrNetaddict
6 жыл бұрын
I agree. I'm a first time watcher and if I hadn't read the comments, this would have probably been the last video I would have watched, but it sounds like this is atypical.
@HavanaWoody
5 жыл бұрын
ouch not alone, the poor vocal audio was drowned out by the music which got really annoying
@kodoan411
5 жыл бұрын
Agreed
@mickcummins5331
5 жыл бұрын
Thanks for another inspiring woodworking video. QUESTION: How would you compare the Nicholson to the Moxon Style vice, as to ease to make and better all purpose vice?
@TheCoachStokes
8 жыл бұрын
Thank you for new content!
@theUnpluggedWoodshop
8 жыл бұрын
+Nick Stokes (Coach Nick Stokes) it's my pleasure! all the best~
@YelCan
7 жыл бұрын
Exemplary. Chapeau!
@osiasu
6 жыл бұрын
Awesome work Tom, I've just ordered my shoulder vice assembly but once that's done I'll be making a Nicholson vice like this! Love the music in this video and so many others on your channel! Anywhere i can get this track? I'd pay for an album of your instrumental stuff, really good and chilled for working or relaxing. Thanks Rod
@theUnpluggedWoodshop
6 жыл бұрын
Thanks Rod- this one isn't on any of my albums, but if you drop me an email I'd be happy to send along an mp4 file. you can find me at: tom at the unplugged woodshop dot com cheers~
@richardbutterfoss2353
6 жыл бұрын
Nice!
@steverochon1620
7 жыл бұрын
Great work! I'm wondering if there is a fine line between keeping the square wooden guide loose enough to allow for seasonal expansion, yet tight enough to prevent racking. How did you address that? Thanks Tom.
@theUnpluggedWoodshop
7 жыл бұрын
Thanks for the comments and question Steven- We made them 'just' fit and because they're only about 2" square, I don't anticipate them moving enough to make a difference. Hasn't yet- all the best~
@mihumus
8 жыл бұрын
Great job and nice results as always. :)
@theUnpluggedWoodshop
8 жыл бұрын
+Humus Workshop Many thanks!
@briholt100
2 жыл бұрын
Where does one find the hardware for these vices? thank you for the great video. good stuff friend
@theUnpluggedWoodshop
2 жыл бұрын
Thanks… this hardware came from Lee Valley Tools.
@mrwarrens677
8 жыл бұрын
Hello Mr. Fidgen, I enjoyed your video about the Nicholson Style Vise. At the end of the video it states that there is a free sketch-up and pdf. file available. I cannot find them. Can you help me out?
Пікірлер: 385