Absolutely nothing wrong with your install mate. In Scotland we don't have the same building regulations as an England. If it works and there is no leaking gases then it works and if you're getting a good draw and it works then it works. Simple. You hear 1 million scare stories from builders wanting to charge you funny money for jobs with a but of time, patience and reading you can do yourself well done mate
@JF-kb6bl
3 жыл бұрын
How did you fill around the pipe after install? Cement and plaster? Also, is double walled pipe enough through wall ? Or is it double walled pipe plus some kind of sleeve or something else around pipe? Thanks!
@MrRiptonk
Жыл бұрын
It's got to be said - it is a real pity to have the flue on the outside of the building. We have a garden office with a Mickey mouse stove with flue going up through the ceiling and roof - it's 25 degrees on two log bricks. Our Charnwood Aire in the lounge belts heat into the chimney - still nice but a fraction of the efficiency. Flues can heat up an entire house when going through flooring.
@sideshow4417
2 жыл бұрын
Makes your house look like a Chinese chippy
@s1lentsound
Жыл бұрын
Lmao 🤣
@joe8279
7 жыл бұрын
Kenny - sincere thanks for this. Very very helpful!.... Happy New Year to you!
@kennytyrer1965
7 жыл бұрын
Your welcome Joe hope everything goes well on your install. Do you live in the UK? If you do I highly recommend the Woodwarm brand it's only made in Devon.
@joe8279
7 жыл бұрын
I do ...Essex area. Sadly I have already got my order in (and paid for) a Charnwood Island 3. Otherwise I would of taken a look at the Woodwarm. Just need to get the extension sorted and my log burn will be in ! Thanks again
@Powertoyah32
2 жыл бұрын
Don’t think there should be a 90 degree bend in the flue, meant to use 45 degree bends instead but if it works it works
@justbreakingballs
Жыл бұрын
Wrong
@bertyjustice4424
2 жыл бұрын
I got a quote for going through the wall like yours but he said you now can only have six inches od straight flue off the fire back and then you have to have a 45 degree angle off this upwards? It would be so much easier for us if we could go straight through and a 90 degree like yours
@goodgardenersINTL
2 жыл бұрын
you can actually legally have 1.5m of single flue going up the wall then out with twin wall through the wall. You are supposed to have an outer sleeve encasing the twin wall through the wall.
@euangreer
10 ай бұрын
I have absolutely no idea why everyone is obsessed with this 45 degree angle principal because I have built two stoves in my house at 90° angles and never had any draw issues on never had any problems
@Humor-Shqip_18Plus
2 жыл бұрын
Hi mate, i was wandering, does it get hot the flue on the outside, i have wall installation therefore i am a little worried it may damage it?
@Humor-Shqip_18Plus
2 жыл бұрын
Okay will do, thanks.
@monkeyandsofia
3 жыл бұрын
How do you sweep out the horizontal section?
@slendermanRblx
3 жыл бұрын
Have you checked BS 5440 part 1? Those are the requirements for flues which others have already said your installation may not be compliant.
@justbreakingballs
Жыл бұрын
Should be in a liner through the wall. Also should ha e a support bracket under the section that comes out the wall. Bodge job.
@chrishickmott7806
2 жыл бұрын
Nothing wrong with that apart from carpet under your burner .nice install
@ronnieroo227
2 жыл бұрын
Brilliant job, this is just what l am looking for. Can l please ask which fire you purchased as l want to buy one too. Cheers
@samk1584
6 жыл бұрын
I see you went triple pipe stainless with what...6" long through wall, 6" diameter pipe? Everything I look at from uk desires this magic number horizontally, but I don't see this regulation or suggestion in the states.
@kennytyrer1965
6 жыл бұрын
sam k Yer 6 inch inner pipe with 2 inch insulation given an overall 8 inch exterior pipe.In the UK this is called a twin flue system. Thanks for the comment.
@samk1584
6 жыл бұрын
kenny Tyrer So visually I am looking at 8" OD and 6" ID? I believe this is called triple wall pipe here. I never considered OD...should have lol, but didn't. Looks like my 6" hole saw won't do here, but instead, I'll make a square hole and use a thimble. Less money than another hole saw blade. My quandary is that my wood stove pipes out the back and I have a 36" soffit. It's a small home so I don't want to use space and go up inside the house, so out and up is the direction I intend to go. There's very little info on horizontal installations or best practices here. The U.K. Is usually a bit overboard in regulations, but gives a good goal...shorter horizontal is better. I really wanted to use a 135 degree t, but I can't find one in the states so I assume the uk would try to use an elbow kit to go up, then horizontal through the wall 6", elbow again to the 90 degree T and vertical all using triple wall stainless...here I think we would just go straight through the wall to the T and call it a day. Second problem is through the soffit or around it.
@euangreer
10 ай бұрын
I have no idea why this stupid regulation in UK about 45 degree through the wall 😂. I build my twin wall system with 90 degrees out the back of the stove, up 3 or 4 meters, draws very well. In the states I see this is very common. But for some reason folk in the UK obsessed with 45 degrees through the wall. Lot of nonsense. If it's tight fitting, secure enough and draws that's the main point. Usual crap is Britain of paying more for zero reason
@kennytyrer1965
7 жыл бұрын
Flue used was a Dinak system with locking clips on each section. Installed October 2016
@matthewcropper5653
5 жыл бұрын
That doesn't look safe at all. See Building regs approved documents ...
@knebworth1986
11 ай бұрын
I’m just going through this process. There should be a 45 degree angle through the wall to meet regs
@Droningonuk
3 жыл бұрын
Where is the wall sleeve?🤔
@euangreer
10 ай бұрын
The wall sleeve is actually for inspection purposes only answers absolutely no safety use whatsoever because a wall if it's made from Brick is completely non-combustible
@Droningonuk
10 ай бұрын
@@euangreer inspection is for safety
@ChrisGamble
6 жыл бұрын
Open doors and hot ash falls directoy onto carpet...totally illegal
@kennytyrer1965
4 жыл бұрын
See latest upgrade bottom hearh
@kennytyrer1965
4 жыл бұрын
Bottom hearth now installed..see latest video..thanks for the heads up
@carlgilpin2836
Жыл бұрын
This does not meet regs
@euangreer
10 ай бұрын
Who cares. It draws. Other than a hearth clearance at front it's a normal job. I've installed 2 stoves 90 degree bends on each, 10 years ago, both draw perfectly, zero issues, in Scotland there's less requirements. Stove companies make a piss load of money for over zealous requirements. Common sense and the job can be done easily without an installer
@keithwright4921
Жыл бұрын
Poor,installation,1st thing,you must support the Wight,of the flue,with a base wall support,
Пікірлер: 39