Awesome video... glad to see someone putting these lifts to good use instead of something silly. Or just taking them apart and selling the parts etc.
@SierraOne
6 жыл бұрын
Lot of work, labor of love. A great job and excellent tips THANK-YOU!
@raywhyte7916
6 жыл бұрын
Thank you for watching, and I do love my wife.
@tntgamerdotnl
3 жыл бұрын
What a great project and outcome! Thanks for the video :)
@Yousuperdumbass
5 жыл бұрын
Well done, Ray. Awesome job done 👍🏽
@raywhyte7916
5 жыл бұрын
Thanks for your comment Grant, It was a lot of work for this old man but my wife just said she could not do without it.
@mijodo2008
2 жыл бұрын
Excellent workmanship. Clever navigation of Site Logistics. A labor of love. Great attention to Engineering Detail. Cheers from Michael. Australia.
@mikeinbmore
5 жыл бұрын
Thanks for the video. A board member on SCI Care Cure forums had a setup similar to this in his workshop. This was extremely well detailed. Thanks again.
@raywhyte7916
5 жыл бұрын
Thanks for your comment. The lift does the job perfectly and my wife can get to the truck safely. It was a big bonus that we also use the lift for easy transporting yard work equipment up and down. I love it because I load all the groceries on it and quickly bring them down to our door.
@raywhyte7916
5 жыл бұрын
Here is the video of the cover I built for the lift. kzitem.info/news/bejne/rbCI0oOFpnuhmaw
@mikeinbmore
5 жыл бұрын
@@raywhyte7916 do you have any thoughts on how to anchor one to a porch? I believe it's concrete. I could send photos. mikeinbmore at gmail dot com
@raywhyte7916
5 жыл бұрын
@@mikeinbmore I would be glad to look at and maybe give you some suggestions on this project. But I would need to see some pictures to see what we are up against. You can email me whyterj47@gmail.com
@elizabethkelly713
3 жыл бұрын
Awesome! You rock!
@kevinhornbuckle
6 жыл бұрын
Nice work. It looks really sturdy.
@raywhyte7916
6 жыл бұрын
Thanks Kevin, my counterweight base is 1980 lbs. so it's sturdy alright.
@whenwetalkaboutnature4903
3 жыл бұрын
@@raywhyte7916 I'm getting my office AND house built in a few months. I need this for my mother because the first story will be the office and our home will be on the second story, and my mother uses wheelchair. I dont know if I can get this where I live but this motivates me. Thank you for sharing. I hope we can get an update of how it's been working after 2 years. Stay safe...
@zanderman2539
3 жыл бұрын
Excellent job, I would like to see how you did the wiring. I bought a lift off a Scrapman. Still learning Thanks for teaching
@randyurso4799
3 жыл бұрын
Hi Zander. Did you figure out the wiring for yours? I just took one out of a bus and it was working in the bus. I hooked it up to a 12v battery in the garage and it is not working now.
@zanderman2539
3 жыл бұрын
@@randyurso4799 Sorry to say not yet. I got very busy then winter hit. I do have a farm who is very knowledgeable on DC power lifts. Said he would help me figure out the wiring. I will try to video the process.
@randyurso4799
3 жыл бұрын
@@zanderman2539 hi Zander. I was actually able to figure it out, it ended up being pretty easy. Let me know if you need any help. I’d be happy to answer questions if our lifts are similar
@franciscogutierrez5113
3 жыл бұрын
@@randyurso4799 i would please need help
@randyurso4799
3 жыл бұрын
@@franciscogutierrez5113 what kind of lift is it and what is the application? Are you using it out of the vehicle and attaching it to a new 12v battery?
@dd_ranchtexas4501
Жыл бұрын
How are you going to protect the electronics box from water cascading down over the rocks? Was this designed for outdoors - where it will be subject to being covered with water. As opposed to just humid air..........
@michaelsolano5133
2 жыл бұрын
Ray did you use the interlock or bypass it . If you bypassed it how did you do it?
@nicholastom0588
4 жыл бұрын
Job well done I thought I look pretty damn good this idea it's not really new yes something similar that we did Upstate New York and Lake George up over the boat house where there is a disabled apartment of course I like you I did not install it but I have to say congratulations and you gave me a lot to think about if I ever needed to do anything like that the next time thank you
@raywhyte7916
4 жыл бұрын
Thanks for your comment, It was a lot of work for an old guy like me but it has changed my wife's life, being able to get out of the house easily and safely.
@leonbeiderbecke4821
Жыл бұрын
is that the same lift they use in vans?
@deloisrichmond8488
3 жыл бұрын
How to add or put battery in on porch what connectors did you use? I have the same lift and want to do the same thing put it on my porch but running into problems how to either convert it to AC or simply use a battery help.
@Ham549
5 жыл бұрын
I would install a canopy to protect the unit from the weather. Maybe even a soler cell hooked up to a charger or run conduit to the battery to always keep it charged. Also wire in a controll station on top and at the bottom and tie the handheld station to the unit so the wife can operate it independentely no matter what position it is in. Just wire the extra buttions in parrell to the controller on the lift.
@raywhyte7916
5 жыл бұрын
A canopy has been installed for the winter, and I just have to get the video done. I like your suggestion of wiring in a second control. I will look into that in the spring. Stay tuned for the canopy video it turned out great.
@raywhyte7916
5 жыл бұрын
I finally got the video done of the roof I built for the wheelchair lift. kzitem.info/news/bejne/rbCI0oOFpnuhmaw
@laurabrewer1448
3 жыл бұрын
Hello. We are using our Braun Century Lift in a similar fashion, however, when we hooked it up to the battery it didn't work. I see where some others had the same issue and was wondering how you resolved it. Thanks
@josephtese5037
2 жыл бұрын
Is there a compromise in strength when heating and bending the threaded rod?
@stevebaker4229
3 жыл бұрын
How did you bypass interlock?
@randyurso4799
3 жыл бұрын
Hi Ray. How did you wire the unit? I just took one out of a bus and know it was working in the bus. I hooked it up to a 12 v battery in the garage and it’s not working now.
@kalebthompson4849
7 ай бұрын
Did you ever figure out how to bypass the interlock?
@kenrobinson7327
4 жыл бұрын
Ray, Can you kindly show the wiring diagram to battery, need same system for wife with MS who cannot use walk ramp anymore. Any help appreciated.
@raywhyte7916
4 жыл бұрын
The wiring is quite simple and you can not get a shock. The lifts operate using a 12 volt battery. I use a 12 volt deep cycle battery, try and get the highest amp hours you can afford. There are 2 wires coming from the lift, 1 red (+) 1 black (-) and they attach to the corresponding terminals on the battery. If the lift is not in a vehicle that charges the battery every time you drive, then you will need a battery charger to recharge the battery. If you have more questions, do not hesitate to post again.
@kenrobinson7327
4 жыл бұрын
@@raywhyte7916 Many thanks confirmed what I expected and can now go forward with my project. Happy wife is Happy life and I'm sure she will be.Happy Holidays to you and all.
@raywhyte7916
4 жыл бұрын
@@kenrobinson7327 Good luck, I would like to see some pictures of the finished project.
@brucebonkowsky9406
4 жыл бұрын
I am in a wheelchair I like to put it on my home to
Пікірлер: 42