Apparently I’m one of your boys, I clearly remember that badass 240👍💯
@milanmastracci
6 жыл бұрын
That's what I like to hear!! 🙌🙌
@bjornwilder2073
3 жыл бұрын
@Abdullah Boston definitely, have been watching on flixzone} for months myself =)
@NVSTRZ34
6 жыл бұрын
I have the Fortune Auto 500's on my 2014 370Z Nismo. Love the way it handles. I got 13K/11K custom Swift springs, but am considering just a slightly stiffer springs. Even now though, its handles great. Probably my favorite aftermarket addition so far! Also, another fantastic addition to these coilovers is a front sway bar from Hotchkis (great bang for the buck). I have the simple install on my channel in case anyone is interested. Thanks for the install video. Lots of people (including myself) found it really handy! -Justin
@michaelw4930
4 жыл бұрын
How have the Fortunes been holding up for you since its been almost 2yrs? This video definitely have me thinking of doing this along wit the Swifts instead of the KW V3 (pretty pricy to be honest). Thanks again for the videos - your install videos on the Z are top notch - thanks again.
@jameshatfield6814
6 жыл бұрын
Dude that camera quality is way too clear!
@milanmastracci
6 жыл бұрын
Happy to see those camera angles were noticed 😁
@RichardSmith-ic1zw
5 жыл бұрын
James Hatfield I heard he sold his soul for that camera
@JamesLikesDonuts
6 жыл бұрын
My cars already on coils, just watched the video so you get the ad money 🤘🏽
@milanmastracci
6 жыл бұрын
^^ the real MVP 👊
@slavski5729
5 жыл бұрын
bro i want to buy a 370z next year for my 18th birthday and you legit have my dream 370z look man subscribed without even watching the video, amazing car cant wait to look through your previous videos about this car
@hermonbasil9263
6 жыл бұрын
Before installing the coilovers y dont u see if both the front threads match with each other so you get same ride height and not varied ones ...its a no brainer right ??
@milanmastracci
6 жыл бұрын
That is a great way to do it, but they usually need to be turned a bit to ensure the top hat lines up into the strut towers, and the lower cup of the coilovers needs to be slightly turned to get it to fit in the lower control arm. Bottom line is that it almost ALWAYS needs to be adjusted again
@josenieves7185
6 жыл бұрын
Hermon Basil
@BlacksterVFX
6 жыл бұрын
11 kilograms of presssure *engineers crying*
@WilliamPauley
4 жыл бұрын
Paused the video at that point just now to make sure someone brought that up...and I am crying...
@ghostsmoke11
4 жыл бұрын
@@WilliamPauley Can you explain what yall mean by this?
@WilliamPauley
4 жыл бұрын
@@ghostsmoke11 Basically, "Kilograms" is a unit of mass. In Physics and engineering, we use "newtons" and "pounds" as a unit of force applied, which is the preferable unit obviously for measurement. In the video where he says the spring is set for some amount of "kilograms", that would in the engineering and physics would imply that is the mass of the spring itself, rather than its rated load in a physics or engineering context.
@ghostsmoke11
4 жыл бұрын
@@WilliamPauley Ah I see, thanks!
@terlaluanjay
6 жыл бұрын
nah milan, color does effect performance 🤣
@bautistavazquez6295
6 жыл бұрын
ZepTob Gurning red is 10+ bhp
@Cybuch44
2 ай бұрын
Just a FYI about corner balancing - this car is pretty unbalanced from the factory and it's hard to corner balance this car well, as it requires different spring rates from side to side (I don't mean front to rear, but left to right). So adjusting the ride height by taking measurements from the ground or center of wheel to the fender should be just enough.
@dougibasan
6 жыл бұрын
Are those Rays 57FXX Gram Lights? I need to get me some of those... goes well with the Gun Metal Z. What are the specs for your wheel set up? You got me sold on the coilovers...maybe my next mod. Thanks for an awesome video.
@martinfreeman6227
3 жыл бұрын
how are the fortune auto holding up so far ?
@voncoconut5293
6 жыл бұрын
Always assuming that Nissan know a thing or two about their suspension design and set up, I'm puzzled about the rear suspension placement of the spring - meaning the ''bulky' lower arm arrangement and the upper body location which supports the loads at the top of the spring. This aftermarket coil over requires the same body location designed to take the loads of the damper only but now is expected to also take spring loads. I trust that someone has done the math on this design change?
@milanmastracci
6 жыл бұрын
Nissan engineered the Z (350 and 370) with this same rear suspension design. What is interesting is that Nissan's high performance race Z's have suspension setups just like the aftermarket one I installed. Maybe its a more comfortable design? Maybe it was cheaper to do it that way? Maybe they designed it to be repaired easier? If you can find out that answer, I'd love to hear it.
@DiminishInEternityOfficial
6 жыл бұрын
Does all that have to be tighten to a certain torque setting?
@nessHappening
5 жыл бұрын
Diminish In Eternity that’s what I was looking for
@edwinthetechnician6578
6 жыл бұрын
No new Tool Tuesday :\
@milanmastracci
6 жыл бұрын
I promise.. next week :)
@EasyOhh
6 жыл бұрын
Nice video, I’m looking at getting some Fortune Auto 500’s for my 350z, how do you like yours? Any issues? I’m still trying to decide if I want to go with swift springs or standard springs (my car is a DD for me, I never track it or anything).
@ninocastro8058
5 жыл бұрын
What size are your rims and tires??
@OneOffChannel
6 жыл бұрын
I really digg your thinking on what mods should be done, keep up the good work 🔥💪
@milanmastracci
6 жыл бұрын
Thanks man!! I don't want to overdo this car, but there are for sure some things that I still want to change up 😁
@RKDriver
5 жыл бұрын
That one looks like mine. Love the gunmetal gray with black wheels.
@Erachin
9 ай бұрын
The torque specs in the description are nm not ft.lbs, except the wheel nuts
@stevegivelas9769
6 жыл бұрын
Nice work I have been watching ur videos since u had 7000 subs and u had a lot of detailing stuff, good for you, ur a smart man keep up the good work and keep the videos cmg.
@milanmastracci
6 жыл бұрын
Thanks Steve!! I appreciate the support 🔥🔥
@williecole4555
6 жыл бұрын
Are you going to do an alignment because you changed the suspension or you are Good to go ? I want to know for my ride as well lol.
@ovidiscool
6 жыл бұрын
did you pick your rates or did fortune cause not alot of people get those correct on a true coilover setup. and those are spot on for ur tire setup and a true rear coil
@milanmastracci
6 жыл бұрын
I picked the rates based on the weight of the vehicle, along with what FA recommended. So far it drives nice, but I need to raise the rear because its a bit too low.. I'll let you know what I think of them after they settle in
@zenthusiast4834
3 жыл бұрын
Nice! What after market control arms did you end up replacing the stock for?
@milanmastracci
3 жыл бұрын
I ended up getting SPL arms both front and rear 👍
@kingrichee1817
3 жыл бұрын
It looks simply marvelous I have a 2016 Nissan 370z looking to get rims what rim size would you recommend information ℹ️ appreciate it 👍
@milanmastracci
3 жыл бұрын
Thanks Richee!! Depends what you're looking for. 18's are amazing for the track, 19s are a good mix or performance and looks, while 20s look sweet for the street.
@sikh70
6 жыл бұрын
I have same colour 350z with the same wheel setup. Tripped me out, thought I was looking at my own car on youtube
@BhobsonKatie
4 жыл бұрын
Man I got 370Z sport with 275/35/20 front And 315/30/20 rear and my front scrubs when I hit heavy bumps. Do you think fortune auto 500s or 510s will help? Also do you like the ride? I’m going to get the remote damper controller if I do it let me know your thoughts please thank you.
@user-bs4zz5yc2g
4 жыл бұрын
How is the rear suspension different from genuine? Is the rear spring attached to you?
@patrickleviou8257
3 жыл бұрын
Hello sir,, I own like you a 370z I need 2 information: the 1: must be disassembled from the covers of the trunk to disassemble the rear Coilovers or is it done from below? and 2: I’m amazed at your wheels on the car which is in video . Could you give me the references of your wheels and tires (their diameter, width and offset ) I love the very wide tires at the rear and I would also like large tires at the rear but nobody advises me perfectly to have a wide wheels at the rear ! very nice car excuse me for my English, I am French and I use a translator thank you
@ahmed7680
6 жыл бұрын
Just when I thought the Z couldn't get any better....Milan comin in strong
@milanmastracci
6 жыл бұрын
You just wait man, there's more coming 😁
@UncleGoku
4 жыл бұрын
Great videos dude, but some of the torque specs you mention are not ft-lbs. Specifically the "Rear Lower Coilover Bolt & Nut [2] (123 ft. lbs)" in the service manual that 123 is n-m, which converts to ~90 ft-lbs. "Rear Control Arm Bolt & Nut (73 ft. lbs)" should actually be ~54 ft-lbs.
@chadkurosaki
6 жыл бұрын
Love the videos so much on this channel, they’re so detailed
@gopherchucksgamingnstuff2263
4 жыл бұрын
Your steering column is the reason the other side was lighter, It caught me out too.
@taylor_ridesbikes5423
2 жыл бұрын
What size wheel and tires? Rubbing issues
@bmanh2355
3 жыл бұрын
Cool video. I luv your wheels. What type are they and are you using spacers or is there a specific wheel offset? Also, what size tires are you running in rear /front. Thx.
@milanmastracci
3 жыл бұрын
Thank you! They're 20" Rays 57FXX. They're discontinued now, but they were 20x10 and 20x11 with 265/325 tires.
@roninmantis7584
2 жыл бұрын
You have some serious rubber on the rear! Love the wheels you pick out. I notice they change from video to video. :-) Recently upgraded the transmission mount... wish I would have done this long ago. 70% improvement on the drivetrain slop. Looking forward to the motor mounts arriving.
@dlo__3929
6 жыл бұрын
Must be nice to be sponsored to get a set of FREE coilovers
@Princccceeee
2 жыл бұрын
Can you give me the full detailed list on the Wheel set up! Cant be bothered to spend money on lowering it. And i like how the wheels look on stock suspension! 😄
@gaovincent6778
5 жыл бұрын
How about Kw v3 compare with this coilovers? Which can improve handling maximize?
@Steve10MR
2 жыл бұрын
Random question but what kind of impact Dewalt are you using 1/2? 3/8?
@milanmastracci
2 жыл бұрын
It is a 1/2". I made a video about the two kzitem.info/news/bejne/y7Cly4V7r6yQlYo
@Edumacation95
6 жыл бұрын
great video, please show us what to tell the alignment shop after a coilover job, also what should we do if we have trouble with those big bolts holding the coilovers to the end links
@jensen6429
3 жыл бұрын
What’s the wheel and tire specs ? Just got a 2017 and have no clue but I like this set up please help
@DrewMestel
6 жыл бұрын
You absolutely should have a baseline preload and ride height set before installation, even if it matches stock.
@freakyRunner
6 жыл бұрын
Drew Mestel this "preload" Thing is soooo wrong , on this Type of coilovers. this is a liniar spring you can set the one springcollar on a complete other hight than the other , it changes nothing over the stiffness of the spring. For this Style of coilovers (BC, Fortune and others )the Preload and hight adjusment thing that someone invented only for Marketing reasons for selling their Shit. Don't get ne wrong "preload" on Springs exist but only on progressive springs. Progressive Springs change there stiffness at a Higher preload. But on Fortune Coilovers or BC Coilovers or any Manufacturer that builds this Style of coilover uses Linear springs. And the "hight" adjusment on this Coilovers is also not for adjusments of the ridehight. 😉 Greetings from Germany 🇩🇪
@DrewMestel
6 жыл бұрын
freakyRunner I stand by what I said. You're explaining something to me that I've done already and understand. The preload is a predeterming factor when setting your ride height therefore is is important to measure or minimally be aware of. And who said that preload affected spring rate lol??
@jfresh2054
6 жыл бұрын
Because your brother had a vw golf, do u have any reccomendations on a good set of semi cheap coilovers? Something that sits good but doesn't ride to firm.
@milanmastracci
6 жыл бұрын
To be honest, the cheap eBay coilovers that Luca bought (the Tieferlegungsfederns) turned out to be quite good, and they're still in great condition.. That doesn't mean that all cheap coilovers are good, but we were quite impressed with them, especially for the price. They ran Luca $250 or something along those lines. They did not have any dampening though. If you ask me, BC's are the best bang-for-buck, fully adjustable coilovers on the market. They are $1000 and are well worth the money.
@swervv2957
4 жыл бұрын
milanmastracci heard they ride ruff as fuhh
@alexlafreniere6573
5 жыл бұрын
any tips on how to improve the 370 gearbox?
@hollz.z3430
4 жыл бұрын
Alex LaFreniere i put a short shifter in my 370 and also put a stage two clutch and the short shifter made a drastic difference
@sharpemang
5 жыл бұрын
How was the handling afterwards? I may opt out of the swift springs
@milanmastracci
5 жыл бұрын
Awesome! I just wish I went with a bit stiffer springs. I am switching it up this year to 14k fronts and 11k rears from Swift.
@swoldierjan5332
6 жыл бұрын
I really hope you set the preload . Fortune autos does NOT come with the right preload setting right out of the box.
@milanmastracci
6 жыл бұрын
Preload first, then ride height 👍
@MrKylev35
6 жыл бұрын
@milmast aren't those going to settle and you know.... rub fender? You better not be late to cars an coffee tonight.
@milanmastracci
6 жыл бұрын
RIP ME!!!
@MrKylev35
6 жыл бұрын
Luis Martell it was enough to put his fenders on tires 😂😂 I was there the day of install and the day after.
@gigocool
6 жыл бұрын
amazing! glad you bought a VQ platform, any plans for the front bumper?
@milanmastracci
6 жыл бұрын
Thanks Mario!! I've been contemplating the Nismo front bumper, but I'm also on the fence with the idea of picking up a Spec-V Carbon Fiber Lip and then paint match the top of it.. Both routes are not cheap though which sucks, but oh well
@gigocool
6 жыл бұрын
That's my favorite lip! I love the idea of paint matching the top, I think it would compliment the build so well. I have a G35 Coupe the same color as your 370Z and carbon fiber matches perfectly with the grey in my opinion! @Mario_G35 is my Instagram if you wanna see my build, my next plan is too get a carbon fiber splitter and carbon fiber TS diffuser!
@Engineerboy100
4 жыл бұрын
Good video, but too much continuous talk, need some breaks just to watch what is being done. take some breaks, trust me, listen to it back and you will see it's too much to follow and follow and follow the talk. But good job.
@notavailable9164
2 жыл бұрын
Wheels spec pls???
@kevin2jzzzz203
3 жыл бұрын
How much better are fortune autos than BC with swift springs only problem fortune auto doesn’t make them for my car
@Tjay2Static
2 жыл бұрын
What size tires🤔?
@jsnebhehehd5935
2 жыл бұрын
what spacers did you use?
@seethruhead7119
3 жыл бұрын
did you ever change your rear spring rate? true type coilovers should be around 12/5k ration not 11k/8k iirc
@milanmastracci
3 жыл бұрын
What do you mean they should be in that range? True rear spring rates are typically higher for the same spring rates on a divorced setup. I was running 11/8, but switched to even stiffer 14/11 👍
@seethruhead7119
3 жыл бұрын
@@milanmastracci So the geometry of the suspension for a 370z means that 5k springs on true type are equal to about 10k springs on divorced. 8k in the rear seems like a lot to me for 11k in front. Feal for instance base spring rate for their 441 for the 370z is 12k/5k i'd be surprised if your setup doesn't oversteer too much, maybe not, depends on lots of factors i guess. www.the370z.com/track-autocross-drifting-dragstrip/131384-aero-suspension-tuning-true-type-coilovers.html
@seethruhead7119
3 жыл бұрын
@@milanmastracci saw you insta story, are you doing 14k/6k now?
@ravenbal6423
4 жыл бұрын
Hey man this gonna be great help for me . The 370z is gonna be my first car so I’m tryna get all the help I can get
@PoloZ34
Жыл бұрын
You have one?
@naegleriafowleri1715
5 жыл бұрын
problem with this car is the headlight go to shit very quickly, ive seen lots of 370z, fairly new ones with yellow ass headlights
@_Trait
4 жыл бұрын
heyyy, i bought those green springs for my Subaru, they ride nice!
@GstateOfMind
5 жыл бұрын
Fortune auto's are a quality brand they cater to aspiring car guys
@JeremysRockSchool365
4 жыл бұрын
I love your rims. What are the specs on your rims and tires. it sits beautifully.
@hotsaucebone
4 жыл бұрын
I think they are great too. Hope he reply
@inasimulationwelive
3 жыл бұрын
I never noticed at the bigining of this video those wheels on the 370 look so big 😆 like if there were taken from a truck
@MattmanCDN
6 жыл бұрын
Very Cool Milan ..dont stop EVER!!!
@milanmastracci
6 жыл бұрын
Thanks Matt!! 👊 I appreciate it
@user-bs4zz5yc2g
4 жыл бұрын
How many inches is the wheel? What happens to the front rear offset?
@milanmastracci
4 жыл бұрын
They're 20x10 and 20x11. The offset of the wheels doesn't change with lowering or raising your car.
@AlanLuan18
4 жыл бұрын
Your torque specs are all incorrect, they are in NM, not Ft lbs.
@bchnts
6 жыл бұрын
The z now looks dope but did it feel any different on the road ?? It feels more solid now ???
@milanmastracci
6 жыл бұрын
I will let you know when I raise the car and adjust the ride height lol
@artcota69
3 жыл бұрын
How is the riding with those coilovers bro. Smooth, bumping ride!
@milanmastracci
3 жыл бұрын
It depends how the car is driven. They're a bit harsher than the stock setup, but they feel amazing when you're beating on the car.
@artcota69
3 жыл бұрын
@@milanmastracci thanks for replying brotha, I have some on my coupe but its super stiff and bumpy, and I already went to almost the softest settings and have the springs barely almost nothing compressed just like the way fo did it... I think I choose the racing style instead of the street ones 😩😬😩😬
@artcota69
3 жыл бұрын
I might go with the ones you have or the BR Racing
@Soravia
4 жыл бұрын
If you replace with "True Coilover", your rear damper top install point needs reinforcement to not crack and deform under load.
@Smokeybear_j.b
4 жыл бұрын
I know that happens with the 350 but is that the same on the 370
@Soravia
4 жыл бұрын
@@Smokeybear_j.b it's on every car with similar setup. BMWs suffer the same. Load is designed to be where spring sits. Dampers were put in separate place with less reinforcement.
@swervv2957
4 жыл бұрын
Soravia What that’s also pertain to a G37?
@Soravia
4 жыл бұрын
@@swervv2957 Not sure how much reinforcement G37 and 370Z got. I wouldn't do it on any car. Some race ppl go to great lengths and weld in extra metal. Even on strut based BMW and so on crack front towers are a real thing. They had to reinforce them and later on added extra plates to distribute the load.
@swervv2957
4 жыл бұрын
Soravia oh shit. Ok! So it’s needs to keep it oe as in make sure ur coilover kit is divorced rear set up
@hezharanya
4 жыл бұрын
Do u buy swift springs separate and you have swap them by urself🤔
@milanmastracci
4 жыл бұрын
I bought the swift spring upgrade when I bought my coilovers. I just ended up switching the spring rates on them with slightly stiffer swift springs. My latest video regarding the Z has them in there if you're interested 👍
@hezharanya
4 жыл бұрын
@@milanmastracci is it easy to swap the springs on coilovers never seen a video how to swap them ?
@Pierrot0044
6 жыл бұрын
Question: are the wheels too big ?
@milanmastracci
6 жыл бұрын
Depends which way you look at it. The tires have a bit larger circumference than stock, but I don't find it to be an issue
@bruces12
6 жыл бұрын
When you lower the front end with coil-overs, be aware that you will experience front end scraping.
@milanmastracci
6 жыл бұрын
Been there done that 😉
@TheMaster_Z44
6 жыл бұрын
Can't describe with words how much i like your KZitem channel! Very nice work Millan! Keep on going! You have the car of my dreams.. The Z is looking better week after week!
@milanmastracci
6 жыл бұрын
I look forward to comments like this!! 👊 Thank you so much!! Just stay tuned for next week 😉
@jonathanmartin4012
3 жыл бұрын
did you do torque specs for them when tightening the bolts and nuts on the control arms and coil overs?
@Sergiosniper100
6 жыл бұрын
After each episode i am more and more convinced that Milan is tha GOAT 🐐
@milanmastracci
6 жыл бұрын
My guy!! 🤙🔥
@sainte7837
6 жыл бұрын
What happened to "New tool Tuesday"
@milanmastracci
6 жыл бұрын
Missed it this week.. Had alot of stuff going on, but next week's video will be coming 110% 😁
@theboomboomroomguy
5 жыл бұрын
Wheel and tires specs please
@hotsaucebone
4 жыл бұрын
Where is the next video?
@jesusHernandez-ed9hi
5 жыл бұрын
It reminds me of acc0rd79 car but on steroids
@tarek3702
6 жыл бұрын
Does coil overs require proper torque specs?
@milanmastracci
6 жыл бұрын
The torque on each of the collars? There might be a torque spec but I am unsure of how you would measure that accurately. I just go until it is tight
@E.D.U.CaveMan
6 жыл бұрын
What would happen if someone did this when financing ?
@milanmastracci
6 жыл бұрын
Than they would have a lowered car while they're still making payments..?
@crazzyzack
6 жыл бұрын
The 370z should get a front lip to clean up the look, you should check out www.fly1motorsports.com/ they have got a couple 2013 plus 370z lips.
@brett1234
6 жыл бұрын
Great info. Thanks!
@GalileoOrellana
6 жыл бұрын
Looking clean! I just put on my Fortune Autos on my S2000!
@milanmastracci
6 жыл бұрын
That's awesome!! I wanna see it :)
@GalileoOrellana
6 жыл бұрын
its on my channel!
@ivannsantillan112
4 жыл бұрын
most beautiful 370z ive ever see
@jonny8486
6 жыл бұрын
Spring rates?
@milanmastracci
6 жыл бұрын
11k front, 8k rear
@Malficion
3 жыл бұрын
No rlly, did you do your lashes for this video? They're too on point to be natural.
@surajsoni-ow5dj
6 жыл бұрын
Rich boy
@milanmastracci
6 жыл бұрын
Hard worker
@dasteufelhund
3 жыл бұрын
What does the "11K" mean?
@milanmastracci
3 жыл бұрын
It refers to the spring rate for each strut. 11 kg/mm
@dasteufelhund
3 жыл бұрын
@@milanmastracci So...higher the number means stiffer the ride?
@Frikandellensaus
6 жыл бұрын
Nice! Looks way better.
@milanmastracci
6 жыл бұрын
Thanks man!! :)
@chiliewhilie84
5 жыл бұрын
Holy crap there expensive 1,700$might as well go with airbags
@dliv33
3 жыл бұрын
These or bc??
@milanmastracci
3 жыл бұрын
They're both very good coilovers! If you go with either, you will be happy. I have these on my Z with no issues, however I did change the spring rates, yet did not require a re-valve
@Pendaws
6 жыл бұрын
BTW, a bolt with a 14mm head is NOT a 14mm bolt, the THREAD is the measure of a bolt as a 12mm threaded bolt can have a different size head.
@adrianedhouse5175
6 жыл бұрын
Did I miss Tuesday this week?
@milanmastracci
6 жыл бұрын
No, I did lol
@realgamer1789
6 жыл бұрын
Bro why did you go with coils instead of air bags
@milanmastracci
6 жыл бұрын
Bags are for groceries...
@realgamer1789
6 жыл бұрын
milanmastracci lol dude your crazy! So seriously why coils over air
@milanmastracci
6 жыл бұрын
LOL I like driving hard and I find that you can't really fine tune your ride quality with bags. I can't say I've wanted bags before.. maybe if I was going for more stance it would be more appealing to me..? Maybe one day :)
@realgamer1789
6 жыл бұрын
milanmastracci thanks man because it was a question I’ve been dying to ask someone. Ride looks sick
@rizocars6115
5 жыл бұрын
Oh no this kid again
@mike.135i
6 жыл бұрын
rip s14 :(
@dumbtweacz2150
3 жыл бұрын
He lied. He took it for a drive as soon as he ended it
@paulloper8333
6 жыл бұрын
How do you pay all this stuff Milan?
@milanmastracci
6 жыл бұрын
When work consists of playing with cars, its not hard to keep working..
@paulloper8333
6 жыл бұрын
milanmastracci So KZitem is doing you well, been here since the start. The videos were professional since the early beginning.
@carlospinzon1559
4 жыл бұрын
Great video, very informative
@DrewMestel
6 жыл бұрын
I cringed when your said shocks and struts lol
@modified_eurosport
6 жыл бұрын
Looks BEAUTIFUL!! Good job thoroughly explaining the proses, and great camera angles. How’s she drive tho😉
Пікірлер: 203