I’m doing an install Monday, my first solo install for large vinyl window graphics. This video helped so much. Thanks! I work at a Signarama and am more accustomed to ADA signage installs and vehicle graphics
@GEAUXFRUGAL
7 жыл бұрын
Excellent use of window space for advertisement that really sticks out very well.
@judichristopher4604
Жыл бұрын
EXACTLY
@lpedreros
4 жыл бұрын
Thank you for the teachings!! Also, thank you for stabilizing the video.
@golfing4par
9 жыл бұрын
Great Video! I have a graphics sign shop and your video showed us a better way to do this. Thanks so much for posting!!
@familyfree2994
6 жыл бұрын
I’m here because I’m trying to learn before I fuck something up!
@judichristopher4604
Жыл бұрын
BAHAHAHAHAHAHA Aren't we all...
@judichristopher4604
Жыл бұрын
EXCELLENT VIDEO... and Commentary... Can this be taken off with ease when you leave the building say years later? I am in the midst of moving back to Albuquerque, New Mexico (US) to RE-Open my Acting Studio... and this would be FANTASTIC... to where we could look out, but people can't look in... and GREAT advertisement... Can I order the sheet from you and you mail it?
@brianowuoche2337
3 жыл бұрын
Wow! Nice job, and she's very jovial.
@barbaradobree6840
6 жыл бұрын
It would have been helpful it you had shown us what the view is through the perforated film from the inside of the windows!
@mekayforever6747
10 жыл бұрын
Educational. Thanks for the lesson
@zigfridtijunelis616
4 жыл бұрын
You guys should get our GeckoPatches (glass magnets) Speed Mags and mega TimberMAXX squeegees.
@timaosborn
5 жыл бұрын
Outdoor window perf in Arizona's summer must make the material nice and gummy. A real test of installer skills?
@JasondelosRios
9 жыл бұрын
Thanks for the video! How long does it last? does it begin to peal off after a while? How long till it begins to get bleached by the sun?
@maximusmeridius1272
5 жыл бұрын
Would have been nice to see from the inside out with the images in place to be able to see it is you are saying to be able to see out.
@GEAUXFRUGAL
7 жыл бұрын
You have an idea for the gen 2 Prius? I need to bring a Prius V in there? It would make sense to do this to a Prius V. I would like to have window covers that look like somebody is sitting in the car at a glance not to beat the carpool but so if a criminal was cruising your neighborhood they see somebody in the car at first glance and might drive on.
@skatersguide2america210
7 жыл бұрын
great video ! Can you do one on the different sizes of holes and light tint %. Personally i would like to buy some to cover a car for the golf ball aerodynamics, any idea on the size i should get? I should prob test different types
@amykeller982
Жыл бұрын
To remove later down the road do you just peel it off?
@SkankHuntForty2
4 жыл бұрын
Is there any way to install these inside of the office, rather than outside?
@judichristopher4604
Жыл бұрын
WHY? This is especially used so YOU can SEE out of the window, but people can't SEE in... If you need this inside... then use a normal Sheet of plain film... BUT... I can SEE what you might be thinking if one has a GLASS Office... That is a Great idea.... The person inside the office can SEE Out... but no one can SEE In... I'm thinking... Right???
@سااري-ر9د
4 жыл бұрын
Waw yu gilr. Me no englich yas arabic. From yemen . yu good gab uy ar from. Yu usa aw in ingland انا اعمل بهذى المجال وكنت اقوم بتركيب الملصقات الدعائية بطريقة خاطئه ولكني تعلمت منك شكرا thankyu
@print4apet207
11 жыл бұрын
Did you have this laminated ? I'm doing a huge job next week, and think I'm gonna laminate it so water doesn't get under it and peal over time, thoughts ? Looks great !!!!
@travtuck7646
Жыл бұрын
You don't laminate window perf in my experience.
@longliu2901
4 жыл бұрын
I do have some questions. I am having two large graphics do I have to do 1” over lap to connect them together?
@stephentv7199
2 жыл бұрын
What is the name of the tools used in fixing it
@johnqsak
6 жыл бұрын
nice Video, but who TF edited the black bars on the sides.... Those things are moving like crazy, making it hard to focus on the video.
@raiderman28
8 жыл бұрын
great vid.
@scootsmcgoots6343
5 жыл бұрын
So, can this stuff be installed from the inside or only outside? Can it be used as privacy tint without any graphics printed on it?
@leewagner942
3 жыл бұрын
Yes it's generally white in the face and black on the adhesive side. So when applied blank it'll look primarily fully white in the face and a slight tint of black from the inside but still giving good visibility. Acts well to keep the sun out too 😎. But remember in the dark if you've lights on you'll be able to see 👀 inside !
@vickikgibson9470
8 жыл бұрын
Hi guys, I had heard you need to apply water and soap to the surface before laying down the vinyl onto glass. I will be putting vinyl onto sintra...I know, boss thinks sintra is not as wearable as a vinyl top on it...sigh...anyway...soap and water??? I can see using water since I have to apply it to a very large area of 8x4 feet surface....any suggestions? Thank you!!:) Display artist for a Nature Centre in Canada.
@MrNicholasRogers
8 жыл бұрын
about 1/4 cups soap(I like Johnson baby shampoo and yellow Ajax detergent) to every gallon, or roughly 20 drops. Soap allows adhesive time to slip around on glass, eliminating the risk of peeling back before finishing caused by any obstructions like bubbles. in this method you're actually pushing water out and allowing the material to dry in place, before any permanent position. also wetting the surface before applying pressure increases the efficiency of pushing water out from behind material.
@NakormiteVasu
Жыл бұрын
Is the chocolate offer is still valid? =)
@azeemsign3160
5 жыл бұрын
Nice wark Good job
@hardachesons
6 жыл бұрын
What kinda squeegee do you use to not streaks on the vinyl?
@albaherrera8501
4 жыл бұрын
What can you do if once you get to the bottom corner you have a spot that keeps bubbling/crinkling? HELP!!!😂
@camerongilham8056
6 жыл бұрын
Hi, I Installed this type of perforated window graphics in a cold climate, in Alberta Canada. It was fine for the summer/fall, then in the winter the temperature dipped to about -25F and the glass cracked. Has anyone else had this happen? Thanks!
@eyeworld571
4 жыл бұрын
Wich type tool used
@shanephillips1730
4 жыл бұрын
Is the perf laminated?
@supremegmb9773
4 жыл бұрын
Fuck. I just might hire this guy to see how handsome he his.
@eetchit6034
10 жыл бұрын
what do you use to take these off?
@maximusmeridius1272
5 жыл бұрын
Just buy your own! Hahahaha.
@leewagner942
3 жыл бұрын
It'll peel of fairly easily because it's not 100% adhesive because all the tiny holes. Just use a standard bladed glass scraper, once it's all off you'll have to clean the windows again after to remove any residue with a good soapy mix and squeegee.
@judichristopher4604
Жыл бұрын
I am a little bit disappointed (Not the video)... but whomever is checking this video out with this business... NO ONE ever replies to the questions... not good business service... I wonder why no one is checking this video to REPLY back to your VIEWERS... ???
@doccecil2636
6 жыл бұрын
What could I expect to pay for a sign like that?
@thebusinessclinic7242
6 жыл бұрын
Printed or printed and installed?
@doccecil2636
6 жыл бұрын
The Business Clinic printed
@thebusinessclinic7242
6 жыл бұрын
That perforated vinyl on 4 feet wide and 8 feet tall about $180-$220 per panel depends who's printing. With us it's $180 with design and print
@judichristopher4604
Жыл бұрын
@@thebusinessclinic7242 Are you the one with this video? I'm interested in doing this once I move to ABQ NM...
@chrisbroscoi3286
5 жыл бұрын
What a nightmare. Your stretching the hell out of it at the end. And stop saying bubbles. Window perf has holes. You don't get bubbles!!!
@waqasKhan-jf5mf
4 жыл бұрын
I from Pakistan this my work
@corilewis5215
5 жыл бұрын
Why do I cringe when I see how other people apply graphics
Пікірлер: 55