I like your video. I also like that you have the little one out there with you. Once we as parents are gone, this is what they will remember and re-create with their kids. Parents do like to enjoy themselves but it is all about exposing our kids to positive things. I think you are doing that.
@machetefishing1875
Ай бұрын
@delbreese1662 trying to create memories that is the only thing we live behind
@steveweiss2081
3 жыл бұрын
I’m installing the same unit on my boat this weekend. Your video has been a great help. Thanks for sharing my friend.
@machetefishing1875
3 жыл бұрын
Thanks brother for the comment it is a very nice machine
@rogerdrum5936
2 жыл бұрын
Great video. Glad you left the mistake in the video you had it installed upside down. That was great
@machetefishing1875
2 жыл бұрын
Thanks brother I really appreciate Thanks for watching
@rcnmasterplumber
3 жыл бұрын
Muy Detallado Yo Tambien estoy Esperando Mi Garmin Striker Vivid 7SV “ My First Time With A Solid Fish Finder.....i Was Looking For Instruction And Installation And I Have To Say Your Video Thought Me Alot Thank You Machette
@machetefishing1875
3 жыл бұрын
Gracias hermano buena compra
@southernexposure123
Жыл бұрын
Thanks for the video. I'm about to install my first finder. It's the same as yours. Your video gave me information that helps me be comfortable about putting it on.
@machetefishing1875
Жыл бұрын
Thank you for watching
@MrGeorgeferreira
2 ай бұрын
very good .thank you.
@mikewiththebluecar
Жыл бұрын
Awesome job brother. The only suggestion I would make is when your drilling into the transom to mount the transducer, I’d put the mounting screw up against the drill bit and wrap a piece of tape around the bit to mark how deep you need to drill. This way your not drilling any deeper than you have to. Just my opinion. I was really surprised at how you have to bend the transducer wire back toward the mount. Not sure why they would design it that way.
@machetefishing1875
Жыл бұрын
Thanks brother I really appreciate 🙏 and yes you are right about that. Some time I play a little bit too lazy
@ernestogarcia3384
Жыл бұрын
muy buen video yo acabo de comprar uno y oi lo boy a instalar saludos des de las vegas
@rogerdrum5936
2 жыл бұрын
Great great video bro! Thank you for sharing. I feel confident I can do this too. Thanks!!
@machetefishing1875
2 жыл бұрын
Thanks brother if I make it any body can make too
@buckybucky1250
3 жыл бұрын
You are the best and I’m also Dominicano hermano !
@machetefishing1875
3 жыл бұрын
Gracias hermano te lo agradezco
@arodriguezjtube
Жыл бұрын
Excelente video Bro. Me acaba de llegar el mio y lo instalare este fin de semana
@machetefishing1875
Жыл бұрын
Gracias hermano
@DannyWalker1949
Жыл бұрын
REAL NICE Job on mounting your Striker 7sv unit. I liked and Subéd too.
@machetefishing1875
Жыл бұрын
Thanks brother I really appreciate 🙏
@brendagwynn6748
Жыл бұрын
Great instructional video
@machetefishing1875
Жыл бұрын
Thanks i really appreciate 🙏
@felippecacula9189
3 жыл бұрын
Comprei um desses ontem ... belo vídeo irmão
@machetefishing1875
3 жыл бұрын
Gracias hermano
@wniner8194
3 жыл бұрын
Nice video! Thanks for taking the time to make it!
@machetefishing1875
3 жыл бұрын
Thanks
@JakeCharles_thechattychippewa
3 жыл бұрын
Gracias my man! I'm gunna be buying this unit soon.
@davepleus7945
3 жыл бұрын
Thanks for the install video! Mine should be here tomorrow!
@machetefishing1875
3 жыл бұрын
Thanks for the comment really simply and really nice piece of machine
@slabbusterrtr7690
3 жыл бұрын
I have this unit its really hard to beat for the price had it 1 and a half its froze a couple times but just unplug the power wire then turn it back on its fine... but I'm happy with it
@machetefishing1875
3 жыл бұрын
Yes man I think it is a really nice unit 👍I don't use my to much yet but I liked
@bamadondon0495
Жыл бұрын
So when connecting this unit, all you need to hook up is the black and the red wire for power? I am mounting mine on the front of my boat and connecting my transducer on the bottom of my trolling motor, and I already have power at the front of my boat for one of my other units. So all I need to do is just connect the red wire for power and black for ground? Read for hot and black for negative?
@machetefishing1875
Жыл бұрын
All you need is power but remember if you connect straight to power you have to turn on and off manual
@BrisasRosel
Жыл бұрын
Tu haces de todo un poco. Pues yo aqui protejiendo mi cuenta de los buitres asi que mucho ojo. Besitos a Pito
@TheIceman101
2 жыл бұрын
You might want to use a ratchet drill that's ajustable to make sure your screws are tight, I installed mine a few days ago.
@machetefishing1875
2 жыл бұрын
Thanks brother
@wahness
Жыл бұрын
did you need to do anything with the yellow grounding wire on the back of the unit?
@machetefishing1875
Жыл бұрын
I only connect the red and black wires and it running fine
@jakeladuke8
3 жыл бұрын
I have the same unit that I installed but took it out today and my side imaging wasn't the greatest. Do you know any adjustments I can make to get it clearer.
@machetefishing1875
3 жыл бұрын
Boss man I think that goes in to how far you want to see
@BrenoPescador
2 жыл бұрын
Perfect
@Michael-zc7sj
3 жыл бұрын
Great video man!
@machetefishing1875
3 жыл бұрын
Thanks brother
@savagelexlex1296
2 жыл бұрын
Thanks :)
@azekjohn7687
2 жыл бұрын
Hi mate..can I ask the power wire can I direct connect to battery..big battery with original fuse come with the units.
@machetefishing1875
2 жыл бұрын
Yes sr that is exactly what I did
@azekjohn7687
2 жыл бұрын
@@machetefishing1875 oh ok thanks a lot for the beautiful video and the details..
@machetefishing1875
2 жыл бұрын
@@azekjohn7687 thanks you for watching
@calebbranham9990
3 жыл бұрын
How did you get the rope through that flexible conduit to get to the back?
@machetefishing1875
3 жыл бұрын
Boss my boat the rope already there but what normally people use is a snake wired from home depot is strong and flexible
@kylekellogg1723
3 жыл бұрын
Can I run this right to an extra battery I have? Or do I need to tie it into existing wiring?
@kalebulloch1933
3 жыл бұрын
What size drill bit did you use?
@machetefishing1875
3 жыл бұрын
I don't remember but you have to used drill bit a little bit thin then the screws are you going to used
@Michael-zc7sj
3 жыл бұрын
5/32
@nihle7380
2 жыл бұрын
How are you going to show a video of installing this unit but you didn't show the part on the trolling motor? When you buy a unit and watch a video you expect to see everything it takes to install it. I like your video but what the hell do I do up on the trolling motor? Guess I'll have to read the damn instructions instead of wasting my time on a video that is half-assed with the installment.
@machetefishing1875
2 жыл бұрын
My friend i don't know how you lose your time watching the video. Because in the first minute of the video I said this part is for the trolling motor i not going to used and put away
@nihle7380
2 жыл бұрын
@@machetefishing1875 Exactly bro, that IS the part I wanted to see. I would have liked to see the install from beginning to end with ALL parts of the unit. My main reason for me watching your video was how you do the parts on the trolling motor But hey, it's cool and I still watched the video you made. But I'll figure it out. I just wanted to see you do all of the install so I don't mess anything up. Peace ✌️ bro...
Пікірлер: 59