Dude you are a lifesaver. Thank you so much for making this video.
@HanzelFonferek
2 жыл бұрын
Hey no problem bro! I am glad the video helped! Thanks for the comment! Subscribe if ya like! 👍 Thank ya much!
@VinoRatRodbuilds
2 жыл бұрын
Nice looking rear fender!
@HanzelFonferek
2 жыл бұрын
Thanks bro! Appreciate it!
@motorizedbicyclerider5296
2 жыл бұрын
Nice work bro 🚲💨💨💨 nice brakes 💨💨💯👍
@HanzelFonferek
2 жыл бұрын
Thanks bro. Appreciate it 👍💯🤙🚴💨💨💨✌️
@motorizedbicyclerider5296
2 жыл бұрын
@@HanzelFonferek 🚲💨💨💯👍
@mrkeopele
Ай бұрын
combination wrench, open end wrench, terms, whoo! anyway, nice job adding brakes, I just got a Huffy Cranberry Cruiser that someone added the 48V1000Watt front hub motor to and it still only had the single speed setup and coaster brake, now, it does stop with that coaster brake at slower speeds but, that 2kw motor power will be a lot of speed to try and slow down with a single coaster brake. so, nice to see you do it before you put the power on, might avoid a collision stop your way!!!
@HanzelFonferek
Ай бұрын
For sure, thanks!
@leonidascarr2241
9 ай бұрын
Bro. Now your Blk Beach Cruiser is Sweet!
@HanzelFonferek
9 ай бұрын
Thanks man I appreciate it. I ended up selling that build for $400
@soontobevanlife7950
2 жыл бұрын
A friction motor with tail light an headlight will do you wonders :) get more thumbs up from people with big round light on front . Also BLUE THREADLOCK is a must for fender bolts As well any bolts . Saved me lots . Also don’t forget to torque the head bolts are first ride … that I learned hard way
@HanzelFonferek
2 жыл бұрын
For sure. Thanks for watching
@leonidascarr2241
9 ай бұрын
Lol... it was my seat I was two miles away from my tools😁
@noah97589
2 жыл бұрын
Aye little advice do not use stock rims from that frame, bearings go out and u will crash learned that the hard way
@HanzelFonferek
2 жыл бұрын
OK. Thanks for the tip! Subscribe if ya like!
@soontobevanlife7950
2 жыл бұрын
I second this , though I didn’t crash , watch (a twist of the wrist ) will help save you from lots of avoidable accidents. Every rider should have to watch that to ride help not look like noob lol . Also the sprocket you can order a specific one that attaches to the hub vs spokes much safer an easier to install 3 bolts . Also mirrors that’s a must
@leonidascarr2241
9 ай бұрын
Great Job... My frame tubing is about an inch thick@ that transitions into the back wheel frame@ the seat area where I will have to install my back brakes!😏 i'll figure something out, bout go riding! Take Care & Thanks!
@HanzelFonferek
9 ай бұрын
Thank you. You as well, have a great day!
@BuildBreakFix
2 жыл бұрын
That bike takes a 90mm brake. What you have is fine. Just mount it under the bar it will be align then with the rim and grab better! If it's on top it will eat into your tire as it flexes over time
@HanzelFonferek
2 жыл бұрын
OK thanks aton brotha! 👍💯🤙🚴♂️💨💨💨✌
@natestockman5429
Жыл бұрын
Could you clarify what you mean by mounting it under the bar? I don't see how you could mount under that bar that holds the rear fender. I ask because I'm working on adding hand brakes to the same frame in this video.
@natestockman5429
Жыл бұрын
Nevermind, I see now that you meant to flip the assembly around to the other side. Couldn't picture it at first.
@BuildBreakFix
Жыл бұрын
@@natestockman5429 that is correct lol! Beach cruiser bikes are made to have brakes under the mount not on top like mtb
@leonidascarr2241
9 ай бұрын
Great info...
@Littleevil9975
2 жыл бұрын
Awesome bro I’m very glad you took my advice on the break I know so many people that they failed n kicked forward anyway bike is awesome looking and coming out great what motor kit did you end up getting for it
@HanzelFonferek
2 жыл бұрын
Thanks bro! Yep taken the advice of the people with the wisdom and experience! I went with Zeda 66/80cc 2 Stroke
@Littleevil9975
2 жыл бұрын
Hell yeah that’s super awesome One of my favorite motors bro then down the road if you ever want to be insane fast you can convert that motor to the minarelli That motor has so much potential it’s insane
@Littleevil9975
2 жыл бұрын
I had mine up to 56 mph before it was a minarelli Once you get yours I can explain how I got mine up to that too to show you how to do yours
@leonidascarr2241
9 ай бұрын
@@Littleevil9975wow you two brothers are HEAVY Weights!
@soontobevanlife7950
2 жыл бұрын
Get engine grease an grease that motor good on gears an bearings ! It’s very important or clutch will be gone in a month as well upgrade the rear wheel to a road king tire they’re wicked :) , the rear axle will be first thing to go as it did on mine … also watch a twist of the wrist . It’ll save you from getting into accidents / improve your ability to not look like a noob to other riders .
@HanzelFonferek
2 жыл бұрын
👍
@ricktaylor26
2 ай бұрын
I’m was going to get the same brakes as you did. I’m just wondering if the back brake is still working and does it work well Thanks for the video
@HanzelFonferek
2 ай бұрын
Yeah it worked great. You're welcome
@MrFlatlandcycle
6 ай бұрын
Would the rear brake have been better mounted at the kickstand area? Looking for solutions for an old Schwinn kunker build. I wondered when you were going to find the fender bolt with the drill bit. Klunkin' ain't easy.
@HanzelFonferek
6 ай бұрын
I mean you might be be able to
@joeyrideout8952
10 ай бұрын
I think meant to down by the kickstand and there's a trick sometimes when you install them upside down to get extra length
@KennethHedger-ln6bq
10 ай бұрын
I hipe u took them febders off and didnt find out the hard way bro i have them same bike love it
@Nathan-ujki46
10 ай бұрын
My girl loves this bike n got it for herself
@HanzelFonferek
10 ай бұрын
Yeah it's a great bike!
@johnstevenson8837
Жыл бұрын
This is a great video! I am going to have to do the same thing on this old Murray cruiser. How much extra length did you have on the front bolt through the fork hole? My fork is a little different style than the Hyper. How did you determine the angle to drill the back mounting hole? Thanks
@HanzelFonferek
Жыл бұрын
Thank you! I appreciate it! I just winged it and drilled straight on and it worked out great! You can just adjust the brake pads then to correctly hit the rim. 👍
@johnstevenson8837
Жыл бұрын
@@HanzelFonferek Thanks. Does the front brake bolt through the fork have plenty of length? Can't quite see on the video. i
@leonidascarr2241
9 ай бұрын
I have a murry double rider... I purchased for $10 bucs & its been sitting in the Rain every since!
@Wannaridebikes
2 жыл бұрын
When you put breaks on a bike with metal fenders take two pieces of wood mark where the bend needs to be. Then lay the fender on mark lay it on the two pieces of wood like wood is the be like number 11 in the gap you hammer where that mark is made this way it’s only one spot.
@HanzelFonferek
2 жыл бұрын
Okay! Thanks bro! Appreciate it
@Wannaridebikes
2 жыл бұрын
@@HanzelFonferek any time ya need ideas or help with a bike just yell my way.
@HanzelFonferek
2 жыл бұрын
@@Wannaridebikes sounds good thx
@VinoRatRodbuilds
2 жыл бұрын
Hanzel , did you say if you're going to put a motor on this bike?
@HanzelFonferek
2 жыл бұрын
Yep I am putting a Motor on it! 👍💯🚴💨💨💨
@bryanazbel5440
Жыл бұрын
Bro! Thank you for the video...Could you,please,include the items you bought from Amazon,because I have exactly the same frame cruiser(Raleigh retroglide 7 speed cruiser).How much did you pay for the parts? Thank you!
@HanzelFonferek
Жыл бұрын
Sure! Your welcome
@Bobs-yer-uncle
Жыл бұрын
Hey man I think you own both of them so do you think there's any difference in the hyper and the switz cruz I've heard they're the same bike with different stickers on them 🤔
@HanzelFonferek
Жыл бұрын
They are both great bikes, but If I were to pick one out of the two I would take the hyper beach cruiser. With my experience it's just a better bike
@juliusfonferek
2 жыл бұрын
Noice
@tylerjourdan358
Жыл бұрын
Can I throw a motor on my beach cruiser without hand brakes and just the reverse pedaling brake?
@HanzelFonferek
Жыл бұрын
Yes. But i most definitely recommend putting Hand brakes on just in case the coaster brake fails which it most likely will. 👍
@jonneet2126
2 жыл бұрын
Did you try riding the bike stock before you started the mods? What did you think of it?
@HanzelFonferek
2 жыл бұрын
Yes I did! Yeah it worked pretty good! I wanted the extra braking power because i was putting a motor on it and I did not want the coaster brake to fail on me or lock up like it did on my other bike. If your just gonna use it for a Pedal bike the hand brakes aren't that necessary👍👍
@HanzelFonferek
2 жыл бұрын
Subscribe if ya like! Thanks!
@MrFox-et7gn
Жыл бұрын
I got a pair of black ops wheels for my cruiser, they are freewheel and I now need hand brakes, some that go around the fenders. Small difference is my previous wheel was 26 (2.25) new is 1.75 should be fine
@HanzelFonferek
Жыл бұрын
Yea they should still fit
@HanzelFonferek
Жыл бұрын
Sweet
@Loudes012
13 күн бұрын
Nice video shorty? Is da bike for sale. You look like you live in an Illinois suburb!
@HanzelFonferek
13 күн бұрын
I sold it awhile back
@dickglass3
2 жыл бұрын
What size drill bit did you use for the hole in the back?
@HanzelFonferek
2 жыл бұрын
I forgot sorry I should have mentioned.... Best bet is to match a drill bit to it by putting it nose to nose with the thread part of the brakes 👍
@NicksBikes
2 жыл бұрын
I bought one of those. Worked great until the pin snapped. Just be careful it's always dead straight
@HanzelFonferek
2 жыл бұрын
Okay thanks bro!
@cheesebeef4902
2 жыл бұрын
Is this bike better than the swizt Cruz?I had no luck with the swizt Cruz stay together
@HanzelFonferek
2 жыл бұрын
I would say that the hyper is better from my experience of owning them both
@BuildBreakFix
2 жыл бұрын
Back brake goes on the bottom of the bracket on cruisers!
@HanzelFonferek
2 жыл бұрын
Thx bro! Changed it today
@dalepress1581
2 жыл бұрын
How do you put it on bottom of the bracket?
@HanzelFonferek
2 жыл бұрын
@@dalepress1581 you just turn it upside down
@dalepress1581
2 жыл бұрын
@@HanzelFonferek What does it mount to?
@NicksBikes
2 жыл бұрын
The brakes I bought for the Mk3 bike were absolute rubbish. They wore away to almost nothing after a few rides. But I mainly bought the kit for the longer cables, which at least were decent quality
@HanzelFonferek
2 жыл бұрын
Wow! I believe it! Thanks for watching bro 👍💯🤙🚴💨💨💨✌️
@VinoRatRodbuilds
2 жыл бұрын
I would like to build a Harley like motorized bicycle. 👍
@HanzelFonferek
2 жыл бұрын
That'd be sweet! You should!
@soontobevanlife7950
2 жыл бұрын
I built one :)
@dickglass3
2 жыл бұрын
Where did you get the brakes?
@HanzelFonferek
2 жыл бұрын
Amazon
@mtavarez4561
Жыл бұрын
What would you suggest A 2 stroke or 4 stroke???
@HanzelFonferek
Жыл бұрын
If you don't want to mix gas and oil go with the 4 stroke. It's nice because you can just pull up to the pump and fill it up with the 4 stroke unlike the 2 stroke you have to mix gas and oil. The 2 stroke kit is easier to install compared to the 4. They are both nice and both have their pros and cons. Basically it's what you want ya know. But I'd definitely recommend the 4 stroke! I like them alot!
@HanzelFonferek
Жыл бұрын
You'll probably get a longer life span out of the 4 stroke then the 2 stroke as well
@EXSENTRIX
Жыл бұрын
Does anyone know where I can find a rear storage rack for this bike? I'm having a hell of a time. I'd prefer one that mounts to the seat post. But with that angle I don't think that's possible. I need a rack for my kids seat.
@HanzelFonferek
Жыл бұрын
Here's one on Amazon that should work. www.amazon.com/Ventura-Economical-Bicycle-Carrier-Adjustable/dp/B001NGF6AY/ref=asc_df_B001NGF6AY/?tag=hyprod-20&linkCode=df0&hvadid=312111916046&hvpos=&hvnetw=g&hvrand=5410913988506105608&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9012294&hvtargid=pla-525189045247&psc=1
@EXSENTRIX
Жыл бұрын
@@HanzelFonferek Oh cool! Thank you very much.
@HanzelFonferek
Жыл бұрын
@@EXSENTRIX You're welcome
@sedaysanchez2027
11 ай бұрын
Is the motor on yet? Im buying this set up this friday and want to know what to look out for please respond or make another video on it , im buying two and making twins for me and the wife
@HanzelFonferek
11 ай бұрын
Yep! Great bike! I'd just install the hand brakes because the rear wheel coaster brakes can fail over time 👍
@sedaysanchez2027
11 ай бұрын
@@HanzelFonferek I also bought hand brakes just for the front right now soon I'll buy some for the back and buy the handle that controls both
@HanzelFonferek
11 ай бұрын
@sedaysanchez2027 Good Idea man. Great luck to ya on your builds! If you have anymore questions I'll happy to answer them. 👍
@marcdaniel5713
5 ай бұрын
Get a dual cable brake Lever for the right to operate both brakes from one Lever. Then the left side will be free for the clutch lever
@HanzelFonferek
2 жыл бұрын
Subscribe!
@leonidascarr2241
9 ай бұрын
Lol just got The Hyper-Blue... Soooo I'm pimping it out! Paid $25 bucks & all I had to do was buy an Inner! 1st. Ride I did 7 to 10mls 2nd ride about 15mls
@HanzelFonferek
9 ай бұрын
That's awesome man! Should be a sweet build 🤟
@paulyoder865
11 ай бұрын
Do you have links for the parts
@HanzelFonferek
11 ай бұрын
I don't, but I believe I got them from Amazon
@darnelljackson233
2 жыл бұрын
What do you call those brakes 🤔?
@HanzelFonferek
2 жыл бұрын
Sunlite
@darnelljackson233
2 жыл бұрын
Which site 🤔? Thanks
@HanzelFonferek
2 жыл бұрын
@@darnelljackson233 Amazon
@LukeKlaas
Жыл бұрын
What breaks did you use and where did you get them from
@HanzelFonferek
Жыл бұрын
I got them from Amazon I believe
@person-ce8cr
2 жыл бұрын
Duo brake lever
@HanzelFonferek
2 жыл бұрын
Thanks bro! Appreciate the idea! I might do that!
@HanzelFonferek
2 жыл бұрын
Just ordered one! Thx alot!
@Wannaridebikes
2 жыл бұрын
If you have a coaster break why add the rear. Plus. Adding breaks to a bike like that the cross member might not be the same as others. Being it might not be correct to use breaks unless you have longer reach I personally would not use the rear break if you have the coaster.
@HanzelFonferek
2 жыл бұрын
True... But I wanted the extra braking power👍💯🤙🚴💨💨💨✌️
@Wannaridebikes
2 жыл бұрын
@@HanzelFonferek right I’m just stating it nothing bad.
@Littleevil9975
2 жыл бұрын
The coaster breaks are known for failing and kicking forwards Into traffic or whatever they are very dangerous that’s why you have to put other brakes on I did the same thing to our bike it was doing the same stuff you would hit the brakes really hard and they would kick forward and launch you right in front of a car very dangerous
@HanzelFonferek
2 жыл бұрын
@@Wannaridebikes for sure bro
@HanzelFonferek
2 жыл бұрын
@@Littleevil9975 For sure bro! That'd be bad! Lol. Thanks! And is it very hard to remove the coaster brake without changing the hub?
@ebbikerides8608
2 жыл бұрын
I tried those brakes They don't work
@HanzelFonferek
2 жыл бұрын
They work great! You just have to adjust them right which takes some time
@EdKennedy-ws8wu
16 күн бұрын
Next time how bout a little more descriptive 🙄 what size drill bit? You need to explain not just do bro !!!!!
@leonidascarr2241
9 ай бұрын
Ohhh... Eye see I got the girl model
@HanzelFonferek
9 ай бұрын
Ah. Thanks for watching
@leonidascarr2241
9 ай бұрын
Thanks for being HERE!
@HanzelFonferek
9 ай бұрын
@@leonidascarr2241 No problem'o
@TonyGrace
Жыл бұрын
To solve your brake/clutch issue, use a just one brake lever with double cables like this: amzn.to/3xxNnTE
Пікірлер: 130