I love how a good flooring installer is like “whoever removes this is gonna hate their life”
@BetterToDIY
Жыл бұрын
Customer next year - I think I want to do porcelain tile instead.
@gerseyka
Жыл бұрын
Решил поменять ламинат, пришлось дом сносить🤣🤣
@segei_petrovich
Жыл бұрын
Ну во первых, это не ламинат. А во вторых, такие покрытия делают раз и навсегда.
@ivansantos3614
Жыл бұрын
@PRICE OF NICE ⁰
@0perator490
Жыл бұрын
@@segei_petrovichна сколько такого покрытия хватает?
@segei_petrovich
Жыл бұрын
@@0perator490 если я правильно понял, то это кварцвинил. Если вы не будете его топором рубить, то на ваш век точно хватит.
@0perator490
Жыл бұрын
@@segei_petrovich Спасибо.
@user-rd9ck2bo7v
Жыл бұрын
Гений, тот, кто придумал линолеум кусочками резать и продавать в тридорого.
@user-io7id4xs5q
Жыл бұрын
где ты тут линолеум увидел?
@segei_petrovich
Жыл бұрын
@@user-io7id4xs5q, то что туда добавили кварц, это не значит что оно стало стеклом.
@user-io7id4xs5q
Жыл бұрын
@@segei_petrovich к чему ты это написал?
@segei_petrovich
Жыл бұрын
@@user-io7id4xs5q что бы ты тупых вопросов не задавал.
@olegbond100
Жыл бұрын
Я думал это ламинат
@christophersines8238
Жыл бұрын
Can’t help but think of the guy who has to grind that off in the future.
@Mayrik92
Жыл бұрын
well that isnt his problem
@christophersines8238
Жыл бұрын
@@Mayrik92 yup and it’s that attitude that make the world a worse place.
@randybobandy9828
Жыл бұрын
@Christopher Sines no it isn't. Installing what he wants and not worrying about someone who may or may not change the floor when he's gone isn't his issue and it's not selfish
@darthveda8191
10 ай бұрын
@@christophersines8238I’m that guy right now in my home. I wish hell upon whomever installed this
@NzRasengan
7 ай бұрын
it gets scraped off by robot machines now if its really bad
@user-gd4up5on7b
Жыл бұрын
Новые полы теперь Только поверх этих))
@ulugbeksattarov8687
Жыл бұрын
Перфоратором отодрать не проблема.
@peturpetrov1448
Жыл бұрын
Тд
@Gordian987
Жыл бұрын
@@ulugbeksattarov8687 Проблема по сравнению если бы этого клея не было.
@winibam3989
Жыл бұрын
Если эти нормальные то зачем новые! Что мешает наложить сверху другие через постилку.
@maksoktasha731
Жыл бұрын
@@winibam3989 уровень между плиткой и ламинатом и межкомнатные двери не будут закрываться.
@TheBobcat1957
Жыл бұрын
Hate to see if they had to remove it or repair it but t is nice!
@S.P.B.222
Жыл бұрын
Beautiful! I love how the adhesive on the cover wasn't wasted 💪😁👍
@matthamilton5902
Жыл бұрын
I laid floors 20+ years ago, and we used a solvent based 711 glue sometimes. After doing a closet, you'd be high as a kite, and in a wide open room, your shoulder would be killing you! especially in cooler weather. That stuff was thick!
@DaveyStruggle
Жыл бұрын
I prefer working with thicker adhesives, because of its superior grab. But blisters and sore hands is the result.
@matthamilton5902
Жыл бұрын
@@DaveyStruggle Yeah, unfortunately the latex based glues are still in their development stages and are not quite up to scratch yet.
@user-ck3kd5ze4y
Жыл бұрын
Такую мастику гребенкой 3 мм. вытягивают , а при таком расходе ты без штанов останешься
@Riocontra
Жыл бұрын
@@Dl0a92Fabo9sk4 кредиты, ты хотел сказать.
@Andrew_Zverev
Жыл бұрын
Бамбуковая и еловая подложки нервно закурили в сторонке.
@segei_petrovich
Жыл бұрын
@@Andrew_Zverev, какую роль они там играют.
@olegbond100
Жыл бұрын
Имеешь в виду слой толстый?
@Creaker.
Жыл бұрын
@@Dl0a92Fabo9sk4 усраинцы после майдауна тоже на евро зарплатах сейчас кайфуют, где нибудь у бюргера прислугой по шлифовке сортира вилкой.
@luisgastelum7550
Жыл бұрын
I did hardwood flooring for a while and I hated glue down still to this day
@WillyBShooting
10 ай бұрын
Not all glues are created equal, some are very nice to work with and easy to clean up, this Urathane junk in the video is a nightmare to work with from clean up to flash time to hallow spots from the glue sagging
@martinburke2634
9 ай бұрын
What the hell they do when going change the floor…..move house
@WillyBShooting
9 ай бұрын
@@martinburke2634 floor grinders make quick work of it on concrete. Wood subfloors is a nightmare though.
@the-openlab
9 ай бұрын
@@WillyBShootingWhat glues are the good ones to work with?
@WillyBShooting
9 ай бұрын
@@the-openlab Bostic ultra grip, Stauf SMP, are my favorites, cleans easily when dried so you can just rub the adhesive of planks and walls with a tennis ball so no trying to smear it away with solvents. Both glues have amazing open times and don’t skim over on you while trying to work.
@artur5984
Жыл бұрын
ну зачем все усложнять. 12 лет назад уложил не самый дорогой ламинат на подложку в 3 мм, до сих пор никаких претензий и проблем. Единственное нужно оставлять по периметру зазор. Менять буду из-за того, что надоел цвет))
@ryker102208
Жыл бұрын
Just a helping hint. Next time remove all of the sheet rock mud off of the concrete floor first. It's all in the subfloor prep
@GM6.7
Жыл бұрын
The whole wood over a concrete slab is his other mistake
@MB-zj3er
10 ай бұрын
Yeah, I saw that lift too.
@user-cb9xl2xi6l
Жыл бұрын
Ну,,, потом демонтаж ----динамитом😅
@jd14985
Жыл бұрын
Not Hardwood Flooring! That’s a laminate flooring! Big difference!
@DaveyStruggle
Жыл бұрын
This is called engineered hardwood flooring. Laminate flooring where I’m at has an MDF core.
@mherrmann81687
Жыл бұрын
@@DaveyStruggle Layers glued together (laminated), but with a fancier name (and higher quality layers) is still laminate. They named it that way for marketing purposes, bc it sounds better than "high quality laminate". Hardwood is a solid piece of wood from a tree, shaped and finished.
@DaveyStruggle
Жыл бұрын
Incorrect. Google is free to use, give it a try.
@jamessteelman3936
Жыл бұрын
You don't know what you're talking about that's real wood nobody uses urethane glue to lay fucking laminate shut up and go fuck yourself. 😀
@nathanielcooke6122
Жыл бұрын
@@mherrmann81687 engineered timber is definitely not the same as laminate.
@JOWNZ88
Жыл бұрын
That's an amazing job, you fixed it once and for all!
@kylecarter8436
Жыл бұрын
My dad does commercial flooring and spreads a whole bucket of glue like that. Been doing it for 30+ years and his right forearm is STEEL!!!
@PLitochnikMSK
Жыл бұрын
Доска новая чистая, отделочники затоптали 😁🤗🤣
@alexeysmirnoff2635
Жыл бұрын
Не говори,дичь,а не паркетчик🤬
@alfredo7615
Жыл бұрын
That’s a whole lotta adhesive
@KrishnaMoorthy-gf8rw
Жыл бұрын
Amazing and fantastic opener.
@2nd-place
Жыл бұрын
I just threw my flooring on top of the concrete seems fine so far only one corner seems a little uneven and it’s the corner behind my desk so sometimes I feel it with my feet lol drove me crazy but has settled more over the past few years.
@tritian5874
10 ай бұрын
You tellin' me you didn't use a gallon per square inch of glue like this guy???!? Cmon man! Osha or whatever!
@derrick9635
Жыл бұрын
Hovering that floor knocker over the glue while not recking the flooring edge is a nightmare 😅
@user-xy3rl5xy1p
Жыл бұрын
Потом сам демортировать сам будишь!!! Так же под музыку и видео!!
@user-dw7ng2sz1g
Жыл бұрын
Огромное уважение за труд и профессионализм!!!!
@user-gd2qc6ib5v
Жыл бұрын
Нет тут профессионализма. Нанес клей на большую площадь. И пока он заклеил первую линию, на клею для второго слоя уже успела образоваться плёнка. Потом и отклеиваются такие ламели (характерный хруст при ходьбе). У него итак клей просроченный, считай что там растворителя уже нет, даже верхний слой успел схватиться, так он ещё и на три полосы сразу клей мажет.
@user-gx9yk1uc5u
Жыл бұрын
@@user-gd2qc6ib5v100%!!
@k13m13
Жыл бұрын
The neighbours will love this...
@c50ge
11 ай бұрын
The next guy to replace the floor will curse for hours
@bryaniskoo
10 ай бұрын
Weeks
@icuinthelight
Жыл бұрын
Big mistakes start at the beginning. You glue 3/4 plywood down first, then apply wood floor nailer. If there is ever a flood or need to fix or replace floor q uick and easy. Also a barrier against cold concrete.
@DaveyStruggle
Жыл бұрын
If there is a flood, you will not only need to replace the wood flooring, but also the plywood now. The adhesive used in the video acts as a moisture barrier.
@mark6245
Жыл бұрын
When I used to be a spray painter we used to use the lids as frispy at work
@johnq3441
11 ай бұрын
Did flooring for years and floating that glue with the trial is no joke 😮💨 forearms done in a few strokes
@AGfrom83
Жыл бұрын
You got a bit of wood on your grout mate!
@trimericbark2755
Жыл бұрын
I nerve knew that’s how you open those cans I always use my fingers lol
@mikepage9520
Жыл бұрын
Nice job, might want to check expiry on that one, that crust was severe
@user-bk4os2fj7l
Жыл бұрын
Music: Beachbag - We Are Young
@user-xl2pr9sm6k
Жыл бұрын
Спасибо брат , музыку закачал )
@user-wb6sv4ky9y
Жыл бұрын
Ты лучший
@rammanboston320
Жыл бұрын
Следующий ролик-поклейка обоев на клей ПВА 🤣
@Ivanpetrol
Жыл бұрын
Нее, это слишком просто. На супер клей 🤣🤣🤣
@GoodMan37
Жыл бұрын
Не смешно 😀, я как раз после такого мастера сейчас отдираю обои со стены.
@iagreewithyou3478
Жыл бұрын
The floor is cake! Definitely.
@bb590
Жыл бұрын
AKA NEVER EVER WILL YOU SEE THAT CONCRETE AGAIN! IMPOSSIBLE TO FIX/REMOVE!
@problemchild1976
Жыл бұрын
I've always just used an underlay foam. What am I missing? If I want a better more solid finish I've used an adhesive underlay
@friend6097
Жыл бұрын
А как же ламинат с замками, для чего такой геморрой
@Erica999k
Жыл бұрын
Любят сложности)))
@RealMadrid-eh6gu
Жыл бұрын
Это паркет
@renovater101
Жыл бұрын
This is laminate floor and no need any glue to install it anywhere, just use underlayment and install it, it is floated floor .
@mr.sfa.6832
Жыл бұрын
@@renovater101 Wrong. This is engineering flooring it needs to be nailed or glow down.
@renovater101
Жыл бұрын
@@mr.sfa.6832 👍,
@rb2287
6 ай бұрын
I remember doing EXACTLY this to my previous house. The wood, however, was 2-3 times THICKER but only 2” wide, so it took me a LONG time to get the entire first floor done. I NEVER did this before, so ANYONE can do it (as long as you can kneel and cut the wood). It isn’t rocket science. The results, however, were AMAZING. I saved THOUSANDS of dollars doing it myself. I followed up with nice baseboards. About 5 years later when we went to sell the house; the floors, paint and moulding are what sold the house so quickly! In fact, within 3 days, there was a bidding war on the “custom” house. 😉😃 Great videos! Great memories. It was HARD to leave that house!
@Ipsissimus
Жыл бұрын
Aaaand now you need pneumatic hammer to get the floor out.
@user-ti9ep1ps6f
Жыл бұрын
че то сгущенки вареной захотелось.И кстати где отвердитель для этой мастики .Сколько сохнуть будет
@user-wg9ik7be7d
Жыл бұрын
на воздухе отверждается, через сутки как резина
@user-gx9yk1uc5u
Жыл бұрын
Однокомпонентный ...полиуретановый...если не ошибаюсь...стоит хорошо!!
@Borisbritva573
Жыл бұрын
вечность
@WillLeingang
Жыл бұрын
I hit my fingers so many times installing my flooring like that. You think I’d learn the first time 😂
@Woodwinsights
Жыл бұрын
Is it not better to make 3mm adhesive layer with 5mm acoustic mat, and then lay panels? I think it's a good solution in case you plan to change floor in future, but I might be wrong...
@MrFilipemamede
Жыл бұрын
Great job, congrats!
@edouardkarapetyan5349
Жыл бұрын
а когда менять .отклеит будет не легко.без клея можно.Если поркет клипсами.
@user-tt8ow5sx6z
Жыл бұрын
это забавы богатых
@01197801
Жыл бұрын
Это бизнес реклама
@Munabarudy5243
Жыл бұрын
To make the floor even
@user-gx9yk1uc5u
Жыл бұрын
@@user-tt8ow5sx6zнет...это инженерная доска..)
@BrianWetzel
Жыл бұрын
Great work....And thanks for using the wet on the Dry cap ......
@adamden9947
Жыл бұрын
Brings back memories of when I worked with some folk who used this polyurethane glue similar to what is seen in this video, to glue down parquetry flooring. It needed to meet commercial standards and regulations as it was for a department store. We mainly used water based for domestic applications and it was very effective when cured. 19mm solid Australian hardwood was the typical thickness of our parquet blocks, meaning there is a lot of meat should you need to re- sand again and again over its lifetime and it also gave you redundancy in allowances for high and low areas where sanding would take care of levelling. It's hard to get hardwood these days and it costs a fortune! This video, doesn't look like solid timber but rather veneer or what is known here in Oz as engineered flooring, a fancy name for panelled or floating floors. In fact that floor type of installation appears as a clip lock system that connects together and just sits on an underlay which sits on the sub-floor. Either I'm not seeing the panels well enough or the client wanted them stuck down!
@sleepybot3905
Жыл бұрын
Yeah. I would have never glued these down
@user-rt9sl4wx7k
Жыл бұрын
Само мало лет на триста ремонт затеял.
@user-zh7dr2gk1e
Жыл бұрын
Я на подложку делал так как у меня пол деревянный то перед подложкой ложил плиты!
@teddytransue8098
Жыл бұрын
Very good job 👍👍 ..and I installed for over 30 years 😎 💪💪
@user-vi4yr7df5n
Жыл бұрын
Вспомнилось мне выражение: масло масляное... Ламинат на клей - они бы ещё анкерные болты по краям каждой доски забабахали!))
@user-hd3nl2rj7w
Жыл бұрын
Сказал тот кто не знает что изначально ламинат был клеевой от 6мм толщиной с применением стяжечных ремней
@user-gi3gk9hl9c
Жыл бұрын
Если что трек называется - "We Are Young"
@user-mq5yz1vz4d
Жыл бұрын
Спасибо! офигенный трек.
@user-po6pv1og8g
Жыл бұрын
🔥
@KM-uw9vv
Жыл бұрын
Благодарю ... Трек огонь 🔥🔥🔥
@skrosscarson6092
Жыл бұрын
A lot of people would just lay a floor over that one if they wanted to change it. But the gluing technique is good. I would just do a cross hatching pattern personally. Adds more integrity to the glue when it drys.
@harrywest2780
Жыл бұрын
Great work
@user-zv2je1yt7d
Жыл бұрын
по музыке видно что не наши. место подложки кантон ложатся
@thedeihl
Жыл бұрын
Nice job mate
@kraken8586
10 ай бұрын
The forbidden peanut butter.
@capn.c5321
10 ай бұрын
That's amazing! Hardwood in a can! What will they come up with next. Life is amazing.
@dougmorgan510
Жыл бұрын
Hardwood floors are laid. Sanded. Then finished. Not prefinished. Had to add to the argument section. Deceptive video title or not. Good looking floor. 🤘
@valdeck553
Жыл бұрын
No spacing? The recommended expansion gap for the engineered wood floor is 8mm (5/16 in). For hardwood or bamboo, leave a gap between 10 to 15 mm (3/8 to 5/8 in).
@CherryHasNoGoodUser
Жыл бұрын
Imagine falling on that... Ouch...
@ezscoped
Жыл бұрын
I don't miss those days lol
@edmondenterprisesgrouphold3782
Жыл бұрын
I had that done to my floors. I hope I never have to do any replacements,
@ismailabrahams4161
Жыл бұрын
Good
@chriszepeda5104
Жыл бұрын
Scrap the floor clean of mud, then wipe the entire floor clean with bucket of water and sponge. Wait till dry then pour and spread glue evenly. Cut to edges and clean up mess with mineral spirits. Nice work!
@brianmcfarlin9455
Жыл бұрын
Did anyone notice the piece 😅f metal that was inside the can? That is a special notched trowel that attaches to a standard trowel. It allows for an 1/8 inch continuous coat and another 1/8 inch rib on top. If that concrete is in contact with the ground, moisture will get through and get to the new wood floor. Looks like the aplicator was using a 1/4 notch. So the trowel is scraping half the material to close to the concrete. I saw a floor fail because of this. The company has to redo for free
@DaveyStruggle
Жыл бұрын
You will notice that on my trowel, I already have one of the clip on trowels provided attached from the previous pail.
@jamesandrews9982
Жыл бұрын
Nice job
@user-vb1ky6cq3w
Жыл бұрын
менять пол будет проблема
@tonyaljc
Жыл бұрын
Satisfying to watch
@anupkumardey6224
Жыл бұрын
super sir your work
@nedzadhodza2391
Жыл бұрын
Still good job nice
@postup7944
Жыл бұрын
What a mission , thank god for trades man
@SaberOFF
Жыл бұрын
Я думаю,что ламинат должен укладываться так.на подложку , лохотронский вариант.Правда стоит 5 лет уже.
@user-wg9ik7be7d
Жыл бұрын
ощущения при ходьбе другие, нежели от подложки.
@aaronvallejo8220
10 ай бұрын
Cool. I prefer Cradle to Cradle Certified glue and personally I'd some at least some insulation in there...if in cold countries.
@christian_7500
8 ай бұрын
When the floor adhesive and the planks become the "top layer" of the slab.
@Jonodrew1286
Жыл бұрын
Respect to you, tricky job if you are not fluent in certain practices 🙏🙏🙏👌👌👌👍
@user-om7hx1he4m
Жыл бұрын
А если на подложку и без клея?
@user-oh7yp2rh7i
Жыл бұрын
На подложку себе ложил норм
@user-kh5sm2me1x
Жыл бұрын
Да и клея намазал чересчур
@user-tt8ow5sx6z
Жыл бұрын
менять потом весело наверное
@arnold_j
Жыл бұрын
@@user-tt8ow5sx6z обожаю такие комментарии. То ванную людям надо менять, поэтому под плитку ее не заводят и лепят колхозные уголки, теперь о смене пола беспокоитесь. Если сделано качественно и из хороших материалов, то никому и в голову не придёт менять инженерную доску из дуба ни через 20, ни через 30 лет. А с таким подходом как у вас - можно все на времянке делать. Все равно же менять когда нибудь
@arnoldschwarzenegger8386
Жыл бұрын
@@arnold_j а ты своей умной бошкой подумал,что может новым хозяевам не нравится ремонт и они свой будут делать
@OverkilledUnderdog
Жыл бұрын
This is what NOT to do to install hardwood flooring.
@DJ99434
Жыл бұрын
Where do we find your videos of the only perfect way to install them?
@mindless7577
Жыл бұрын
@@DJ99434 👍🏻so many video’s can have this comment. People nagging how not to do it but not posting themselves the ‘right’ way. It’s just to easy
@OverkilledUnderdog
Жыл бұрын
@@DJ99434 because I disagree with something, doesn't mean I have to produce a video to support that view. Hardwood flooring should NEVER be stuck down with glue. Ever. Go ahead tho if you are inclined. Just wanted to save some heartache for some people. That's all.
@namenotavailable11
Жыл бұрын
@@OverkilledUnderdog I'm glad you think you are the expert but I can tell you, you are misguided. Just laid down Walnut engineered hardwood, which actually stated on the front of the box "Glue or Nail Down Installation". You can't nail hardwood into concrete. I'm a GC doing reno's and have used this type of product many times with great results.
@GM6.7
Жыл бұрын
Finally someone said it. 👏 should have laid down some underlayment pad and glued the tongue and groove
@antoinebeaumont9726
Жыл бұрын
Very good
@raselrahi3220
Жыл бұрын
VERY good
@1josh4
Жыл бұрын
What a workout😂💯 💪💪💪 stuff is so heavy
@Alientraveler003
Жыл бұрын
Must smell amazing
@nickozma1531
Жыл бұрын
Ээээ, то есть замена ламината потом отбойным молотком производится???
@DaveyStruggle
Жыл бұрын
That is correct. Removal of this floor is very hard and time intensive.
@leonidnuriakhmetov6330
Жыл бұрын
Не себе, клей хозяин оплатит!
@user-yv2sr4bm6f
Жыл бұрын
Это скорее всего паркетная доска,там нет замков,она на клей садится,но клея писец много конечно намазал
@NeODin1
Жыл бұрын
@@user-yv2sr4bm6f всмысле нет замков? Ты вообще не видишь как он кладёт и замок в замок вбивает??????
@user-yv2sr4bm6f
Жыл бұрын
@@NeODin1 В прямом,там шип раз соединение ,как в половой доске
@pamelacass9642
Жыл бұрын
I'm thinking about someone crazy enough to put carpeting down after all this work...then changing their mind.
@JL-vo2vk
9 ай бұрын
I hope there a moisture barrier in that material!!!
@jorgemarturano7836
Жыл бұрын
Very Good 🏆
@fritzpadilla7630
9 ай бұрын
Looks like peanut butter. Making me hungry.
@Beholderoffate
7 ай бұрын
2 weeks later customer like "I don't like the color take it up"! 😂
@DaveyStruggle
7 ай бұрын
🤑
@dumbledork9558
Жыл бұрын
Is there a reason to glue it down over the float method. We used underlay for our solid oak floor and it's been there for over 10 years with not a single issue.
@justanotherchannel6097
Жыл бұрын
Moment I seen the guy popping every single flap on the bucket right there I knew he was a rookie.
@cheyenne11114
10 ай бұрын
I mean he spread it nice and evenly. Definitely didn't look like a rookie. You do you though boss
@maxsteel6092
10 ай бұрын
Curious the adhesive strength of drywall mud to concrete
@mikebar42
Жыл бұрын
I can't really see the finished work/edges but it looks good off this clip 👍
@Slonoklop
Жыл бұрын
Мы клали с замками, прямо на линолеум застройщика + подложка!
@user-gx9yk1uc5u
Жыл бұрын
Вы клали ламинат...а это инженерная доска)
@Slonoklop
Жыл бұрын
@@user-gx9yk1uc5u спасибо касатик, волосатик!
@user-gx9yk1uc5u
Жыл бұрын
@@Slonoklop да пожалуйста!)...
@joez.9932
6 ай бұрын
Do you not use a 100lbs. roller when you’re done?
@recycledsteel3693
Жыл бұрын
Butterscotch Angel Delight
@MaryGrace62
11 ай бұрын
You didn't have to put a vapor/moisture barrier sub-straight?
@jonathanbrown9245
Жыл бұрын
Nice kneepads mate
@frankbrooker6569
Жыл бұрын
Often wondered why lot of floor layers latex over concrete before flooring, probably to get it dead flat and protect concrete but if concrete flatter enough prime n go
@istinavam6538
Жыл бұрын
И сколько это ведро будет стоить
@regankaldahl8496
Жыл бұрын
I did this with 3/4 by 4" white oak.Laid 1950' sq ft.I sanded and finished after and turned out beautiful.I charged 21,000 for the job .
Пікірлер: 862