Doing one at a time why wouldn't you torque it down to 125 as soon as you put it in? since all the other studs are still at 125 as well?
@austingarrett29
4 жыл бұрын
You’re brave doing the one stud method. Mainly because your letting pressure off one spot and re applying pressure to a tiny spot on the head gasket 26 times. But keep rocking on with the build. 🤘🏻
@clintfaulconer9816
3 жыл бұрын
Doing it that way yeah it is pretty brave. Now if you do them one at a time and torque them to what the factory bolts are it won’t matter done a few of them now that way. Just gotta make sure to re check them a couple times. Worst case scenario it leaks not all that big of a deal
@Rammsteinschmidt
3 жыл бұрын
@@clintfaulconer9816 you don’t want leaks 🤔
@cole1407
3 жыл бұрын
@@clintfaulconer9816 leaks are the whole reason they exist to be put in to prevent the head from lifting. 🤦♂️
@devonsk8s4
4 жыл бұрын
Would love to see all your guys trucks up close. I live in Seattle. When you guys having truck meet next??
@NeverSatisfied24v
4 жыл бұрын
devonsk8s4 definitely! Idk with all this rona stuff going on lol
@_williamamaya_
4 жыл бұрын
This video deserves more likes
@KH-yv1bo
4 жыл бұрын
i just installed the borge warner s300 on mine with same hx40
@Thepriest39
4 жыл бұрын
So I am think of doing this on my 2001 with 99500mikes on it. Maybe a stupid question but are you loosening up all of the original bolts, taking them all out then installing the new studs or are you doing one at a time. Just asking because I don’t want to wreck my head.
@colin1528
4 жыл бұрын
Always do one at a time. unless you plan to replace the head gasket then you can remove all of them and remove the cylinder head to replace the head gasket.
@cole1407
3 жыл бұрын
Working on installing the arp head studs after having to replace the gasket, can't manage to fit the studs back in under the firewall and I really don't wanto unbolt ny nv5600s crossmember again, any tips to get them back in?
@packingbone1953
4 жыл бұрын
Gonna do a hot re torque? You’d be surprised how much they back off once oil reaches 180.
@NeverSatisfied24v
4 жыл бұрын
Phil Posada yes sir
@Rammsteinschmidt
3 жыл бұрын
Is it preferable to take them out cold or hot ?
@ChaosViper67
3 жыл бұрын
@@Rammsteinschmidt cold, many like doing them I'm not a fan of hot-retorques. It is not recommended by ARP.
@Rammsteinschmidt
3 жыл бұрын
How likely is it to break head studs on the way out (taking out old ones) ?
@cole1407
3 жыл бұрын
Highly possible I've been told.
@ChaosViper67
3 жыл бұрын
Don't use an air impact wrench and it becomes unlikely.
@connorammerman470
4 жыл бұрын
Why would you shave your socket instead of taking all the rockers out?? It's smart to take them all out and check for pitting or corrosion in your trunions which are prone to wear. When one of your rockers lock up, you are going to have a bad day.
@NeverSatisfied24v
4 жыл бұрын
Connor Ammerman lol no need to pull them all we didn’t shave the socket because of the rockers. Truck doesn’t have high mileage so he wasn’t worried about checking them all.
@connorammerman470
4 жыл бұрын
NeverSatisfied24v I’m just sayin homie, if it’s all apart and accessible, why not check that? Supposed to service and inspect your rocker arms every 150k or earlier in some cases.
@NeverSatisfied24v
4 жыл бұрын
Connor Ammerman I’m not disagreeing with ya just not my truck. When I do my I plan on replacing mine with Manton on rockers and a whole bunch of new parts.
@dunnoyolo2238
4 жыл бұрын
Do any of you guys own a 12 valve ?
@NeverSatisfied24v
4 жыл бұрын
dunno yolo no sir all 24v. We need one on the channel though!
@luci1289
3 жыл бұрын
Yup
@omaralvidrez4213
2 жыл бұрын
Ko
@dakodamorgan2681
4 жыл бұрын
Even easier if the hood was off
@NeverSatisfied24v
4 жыл бұрын
Dakoda Morgan true. Even easier if the motor wasn’t in the truck 😂😂
Пікірлер: 30