5 years later you are still helping people! Awesome! 💪😎
@2zzlow
11 ай бұрын
Happy to help!
@drs250
4 жыл бұрын
You are awesome 👏 bro !! You are the first that explain the installation correctly 😎 I had problem with the vacuum holes turning on all time check engine and now I know the problem with your help the holes that connect to the air pump. Thanks again !! Have a xrs Corolla 05 💪🏻
@2zzlow
4 жыл бұрын
thanks for the support!
@drs250
4 жыл бұрын
Also where did you get the holes that goes from the bottom to the intake ? My air intake came with a holes but I lost it 🤦🏻♂️
@thedvm001
4 жыл бұрын
Great video. Thanks for doing it. Will be installing my Injen 2082p today.
@2zzlow
4 жыл бұрын
thanks!
@anthonylandaverde19
6 жыл бұрын
Bro this video it has been so helpful to me now I can order mine injen cai
@2zzlow
6 жыл бұрын
Glad to hear that. Thanks
@VictorTheCoolster
3 жыл бұрын
cant wait to install these on mine! THANKS!!
@2zzlow
2 жыл бұрын
Any time!
@joelrasta84
5 жыл бұрын
Thank you. You solved my problem of where the black hose goes to
@2zzlow
5 жыл бұрын
Glad this video helped
@bpsyyz
5 жыл бұрын
Thanks so much bro..much appreciated
@2zzlow
4 жыл бұрын
no problem
@canadianfishing9953
3 жыл бұрын
You installed your much different than me. I didn’t take my bumper off or my headlights. Small hands come in handy
@2zzlow
3 жыл бұрын
Well...good for you
@davidmarsden7800
3 жыл бұрын
Thanks for the instructions
@2zzlow
3 жыл бұрын
My pleasure!
@RussianzFight
2 жыл бұрын
bookmarked. ordering tonight thanks
@2zzlow
2 жыл бұрын
Hope you like it!
@RussianzFight
2 жыл бұрын
@@2zzlow I had to order the matrix XRS one. They look the same but u guess I have to relocate my small fuse box on the driver fender wall higher
@les2998
2 жыл бұрын
Yes pop out the insert for fog lights. Take battery out. Disconnect the Mass airflow sensor. You unclamp stock hose from throttle body. Take top off the air box. Completely remove air flow box reinstalling ground wire with screws from original box. The other screw mounts the bracket for the intake. Install new intake install battery. Then install filter through inlet where fig light insert was. It's like I've done this same intake a few times.
@2zzlow
2 жыл бұрын
indeed bro
@harryz1247
6 жыл бұрын
Hey 2zz! Just a quick tip for the injen intake: you can take the two bolts from the bottom of the bumper. (The front side of the fender liner. NOT from the wheel side but under the fog lights) and attach the filter last. Thats the way i do it for my smogs!
@2zzlow
6 жыл бұрын
Thanks for the tip. I’ll remember that when I have to go back to stock air box to do my smog again.
@Jeff-ce3mt
3 жыл бұрын
Great step-by-step! Does California perform a different emissions test than other states? I have an 05 XRS and live in Colorado, and I'm wondering if I will need to swap the stock intake back in when I get my car tested every 2 years. Do you know?
@2zzlow
3 жыл бұрын
I doubt it since its a California thing
@Jeff-ce3mt
3 жыл бұрын
@@2zzlow Awesome! Glad I found your channel man, it's super useful since this car is so rare and I live far away from most 2ZZ enthusiasts
@toyotacorolla2395
6 жыл бұрын
I love the Toyota They sell so many aftermarket parts for those car 👍🏻
@2zzlow
6 жыл бұрын
yup, Slowly ill buy the most for this car.
@toyotacorolla2395
6 жыл бұрын
2zzlow Ok
@JohnMarshton777
4 жыл бұрын
I've heard the 2zz doesn't respond to bolt ons without tune well. But as long as you install correctly, your ecu is happy and motor benefits? Thanks for the breakdown!
@2zzlow
3 жыл бұрын
its mostly sound but its really nice.
@showlancer
2 жыл бұрын
i just got my injen cold air intake. i can't wait to install it. did your intake come with a carb sticker? mine didn't come with a carb sticker.
@2zzlow
2 жыл бұрын
its not carb legal
@showlancer
2 жыл бұрын
@@2zzlow can't injen send you a carb sticker for it. i went on their website and it says you can request one from them.
@cambokeogenuso7354
5 жыл бұрын
Nice vids!! Did you have the Rolla lowered?
@2zzlow
5 жыл бұрын
Not yet, its still on the OEM XRS suspension.
@cambokeogenuso7354
5 жыл бұрын
2zzlow My Rolla is lowered on drop spring. I’m looking to get full suspension . Do you know if matrix suspension is compatible to the Rolla xrs?
@tomasmartinez7349
6 жыл бұрын
I had a question on your cold air intake , where did you bought it at . I am trying to look for one at a better price without braking the bank bro. I have an 03 Vibe Gt 2ZZGE with 237000
@2zzlow
4 жыл бұрын
ebay
@tkflex2332
6 жыл бұрын
Find Celica GTS engine cover. it just hides all them wires. thanks for the video much appreciated
@2zzlow
6 жыл бұрын
Yea I actually was thinking about getting one. The XRS one just seems to cover everything.
@frankycruz4564
6 жыл бұрын
Hey amigo did you sill the blue Corolla S with the intake TRD
@2zzlow
6 жыл бұрын
Yes, both are sold
@drs250
4 жыл бұрын
Install my aftermarket intake but it did not came with the holes 🤦🏻♂️ what size I need ?from the connector (where I remove the air pump) to the intake.
@2zzlow
4 жыл бұрын
gotta show me man. message me on Instagram
@jjangyang4456
6 жыл бұрын
do you have to take off the engine cover to install the intake?
@2zzlow
6 жыл бұрын
You don’t have to. I took it off to tuck in the hoses.
@jjangyang4456
6 жыл бұрын
ok thanks
@brandonsamonte6707
5 жыл бұрын
Hi maybe you can hook me up with those xrs cluster gauge. Im from th Philippines btw. Love the vids.
@2zzlow
5 жыл бұрын
I can’t even find XRS models at the junk yard. If I ever do I will!
@NUMPA6
3 жыл бұрын
I left the sensor connected the brown one What is it for ?
@2zzlow
3 жыл бұрын
the butterfly valve on the stock air box
@laroxdabest640
5 жыл бұрын
How it felt? one video listing to those RPM could be nice !
@2zzlow
5 жыл бұрын
It’s noticeable, it wakes up the 2zz tremendously
@laroxdabest640
5 жыл бұрын
I have an kn air filter in the stock box but i removed the box behind the fender and use same plastic piping to put the opening in front
@2zzlow
5 жыл бұрын
sounds about similar to my first setup on my old corolla...
@bisyrus
Жыл бұрын
I installed mine the same as the video, but the air intake keeps getting hot and it makes my RPMs stay high. Any solutions? 😢
@2zzlow
Жыл бұрын
You sure it’s not the throttle body? These xrs models have that high idle issue due to the throttle body
@bisyrus
Жыл бұрын
I seen the video you did on that, and it’s not the issue. I think the mass airflow sensor keeps getting hot, but I don’t know what to do about that. Maybe put some scoops in the hood?
@asdfkjgh96
3 жыл бұрын
What is the air pump for? Can you just leave it untouched?
@2zzlow
3 жыл бұрын
reduce emissions on cold start. yea you can
@jonttu5695
3 жыл бұрын
Is this same for corolla t sport (2002)
@2zzlow
3 жыл бұрын
i dont know sorry
@bpsyyz
5 жыл бұрын
Can you please do a video on doing something with those stock XRS seats..even at the lowest position they are so damn high..thank you
@2zzlow
5 жыл бұрын
that's going to be tough, i would need to invest in a welder at that point.
@joeblogs6380
4 жыл бұрын
Do you have a video on replacing injector seals plz Thankyou
@2zzlow
4 жыл бұрын
not right now but i will eventually
@Jaden-up3bg
4 жыл бұрын
Wait what do u mean?
@joeblogs6380
4 жыл бұрын
??
@Jaden-up3bg
4 жыл бұрын
@@joeblogs6380 like do the seals go bad fast? Just got an 05 xrs
@joeblogs6380
4 жыл бұрын
Jaden Erickson what do you mean
@thedvm001
4 жыл бұрын
I’ve got a problem. There’s a tube coming off the back of my intake that yours doesn’t have.
@thedvm001
4 жыл бұрын
Unless yours has one that I can’t see in the video.
Пікірлер: 96