Want to learn how to install blades on a jointer? Watch this video to see how easy it is. For more tool DIY videos, check out my blog, Let's Talk Wood: wooditis.blogsp...
Hello: This looks exactly like a Delta JT360 6" jointer I just inherited. It was afloor model and did not come with the bars with the 4 bolts in it. I bought the bars but Delta no longer sells the bolts.. Can you tell me their size? Delta rep thought they were 1/4"x28x3/8", can you verify so I know what to buy to install my blades?
@cneesen
10 жыл бұрын
Thanks for posting this video. It was helpful. I have an old Walker Turner Jointer and am getting set to replace the blades. It's a little rusty, and the WD 40 needs to settle in.
@MAGAMAN
7 жыл бұрын
Adjusting these aren't really difficult, just tedious. You should only tighten the two center bolts first, then check, then tighten the outer bolts. You should also wear a glove on the hand you are using to move the blade. Also, when tightening the blade, always pull the wrench away from the blade, never push towards it. If you slip while pushing, you are going to have a really, really nasty cut.
@robira1313
10 жыл бұрын
What make is this jointer? Would the process be the same for a Ridgid?
Пікірлер: 7