I looked at the link to the lights and I can’t find them.
@AxlesGarage
3 жыл бұрын
United Pacific Right Hand Sequential LED Tail Lamp: amzn.to/2YoZyQm United Pacific Left Hand Sequential LED Tail Lamp: amzn.to/2MyvNKy LED Flasher: amzn.to/39usVr5
@frank-gf5vh
2 жыл бұрын
I like my classics as original as possible but this upgrade is definitely much nicer.
@AxlesGarage
2 жыл бұрын
Thanks
@ScoobyDigites
3 жыл бұрын
I've been running some similar to these for 3 years now on my 88 jimmy and love them. More often than not someone who was cruising behind me pulls up along side me and compliments the sequential feature.
@AxlesGarage
3 жыл бұрын
Yes sir, we like 'em as well. Thanks for Watching>
@BryMed86
3 жыл бұрын
Did you do anything other than change one LED flasher that’s recommended or did you change both flashers? Do you have any issues when you have the headlights on with the tail lights staying in the bright position as if you’re breaking or do they go low when you take your foot off the brake? I only changed one flasher like the instruction said but my tail lights stay bright when I take my foot off the break if I have my headlights on.
@nitroirishcannon590
3 жыл бұрын
I own a cucv. I just bought one and honestly you’re making it really easy for me to be able to all the work I need to, to my m1009
@AxlesGarage
3 жыл бұрын
Glad to help and good luck with your project
@larrymelroy5687
3 жыл бұрын
I love mine on my 1985 c10 you have to remember that you need 2 led flashers for under the dash on the fuse block I got mine at work at speedway motors think they are from united pacific parts.
@AxlesGarage
3 жыл бұрын
Thanks for the info
@BryMed86
7 ай бұрын
I added the exact same lights, but I can’t get my right turn signal to work or any of the brake lights ..i added the led flasher and still nothing…did you do anything different???
@AxlesGarage
7 ай бұрын
You need to use the LED flasher that has the ground wire coming off, and put that wire to a good ground.
@dennisreynolds6915
4 жыл бұрын
Makes it look awesome. Hey you should really invest in theft deterents. column lock, brake pedal lock, kill switch etc. These old trucks are easy to steal
@AxlesGarage
4 жыл бұрын
Yes sir, it's on the list.
@conway657
10 ай бұрын
I bought a pair and mine work fine until I pull the headlight knob. The tail light lights u like I’m stepping on brake pedal. Dave Welch won’t reply. I even installed the front turn and marker lights which work great. Any advice?
@AxlesGarage
9 ай бұрын
So when you put the headlights on, the brake lights light up?? maybe you have a crossed circuit? Need to check voltages on output side of harness at the tailight.
@ryanmichaelsteadman5143
Ай бұрын
I’m having the same problem right now as well
@stripper1981
3 жыл бұрын
How did the reverse lights look? Nice and bright white or what were your thoughts?
@AxlesGarage
3 жыл бұрын
Yes they are much brighter, but still the poor factory angle really doesn't do a great job.
@jameshall4385
4 жыл бұрын
they look great. i like the sequential look but a little pricey.
@AxlesGarage
4 жыл бұрын
I agree, they really shouldn't be that expensive.
@205_bowties
3 жыл бұрын
Any moisture problem? I have the same ones and they keep getting moisture in them.
@AxlesGarage
3 жыл бұрын
None so far, we installed in the heat of summer, went through fall, and now some snow and cold with lots of winter rain/ice. No issues. I would take pics and ask for a replacement. For the price they should be perfect.
@BryMed86
3 жыл бұрын
Other than using the LED flasher that is recommended, did you change anything else? Whenever I turn on my headlights, the tail lights want to stay bright. They will signal but they’ll always go back to bright instead of the lower light setting. If I turn off my headlights, everything seems to work normally including the brake lights but someone recommended I might need a diode or something. Do yours all work normally? Can you take a picture or video of that flasher installation and see if maybe I did it wrong?
@AxlesGarage
3 жыл бұрын
Aside from defective lights, maybe your pigtails are plugged in 180 -off or were replaced over the years and the wires were switched, that would cause the bright to light when the dim is supposed to. The flasher should not matter for this problem, we did include the flasher in a video after the taillight install, check the playlist here: kzitem.info/door/PLJ3eH76dwbZvT2SdTmx-RrmnB8Ikp08Tu
@blazerkconvertible
3 жыл бұрын
awesome
@AxlesGarage
3 жыл бұрын
Thanks for watching
@CharlieMoDank14
Жыл бұрын
I have a 74 k5. Where can I get a top like you have on this one? Mine is Fiberglas and broke in a lot of places. We never take it off cause we don’t want it to crack more. I think it’s time to take it off. Start repairing. But I’d like to get a canvas like yours. I like the look.
@AxlesGarage
Жыл бұрын
softtopper.com
@The_Lukas_McGuire
2 жыл бұрын
I have these same taillights, how did you get the turning signal to continually work, mine do not blink
@AxlesGarage
2 жыл бұрын
Used new LED flashers that have a ground wire
@Jonathon_deJong
Жыл бұрын
will this work for 1988 gmc jimmy sierra?
@AxlesGarage
Жыл бұрын
Yes it will, any squarebody
@chrissantiago405
2 жыл бұрын
Why did u put the led flasher in the link if u didn’t use the flasher
@AxlesGarage
2 жыл бұрын
We did use the flasher
@freddypedraza2066
3 жыл бұрын
Lol I touched the old bulb and it turned to sand, now I gotta take out the bulb rim
@AxlesGarage
3 жыл бұрын
Hate when that happens
@chrissantiago405
2 жыл бұрын
Does the revere light cut on mine doesn’t
@AxlesGarage
2 жыл бұрын
Mine does, maybe your back-up light switch is out of adjustment
Пікірлер: 43