Wow colour match up is good. Your right about the fixing. Got to work with what you have (plus Mfg only needs the parts to stay on till it leave the show room or special tool required)
@jofojo8562
3 жыл бұрын
«А сердцу к сердцу» , классная музыка 20:50
@carsinruin6102
4 жыл бұрын
You had me at S54 swap. Subscribed 👍
@DailyDrivenE36
4 жыл бұрын
Samuel Hewson well i don’t know if you’ve seen my other videos but it is s54 swapped e36 😁
@182-media
4 жыл бұрын
If only I lived where you can do almost whatever to a car. Norway is super strict and super expensive when it comes to engine swaps
@babylane6028
3 жыл бұрын
Move lol
@mopedboys6669
4 жыл бұрын
Love the bmw keep doing what your doing mate
@nikaubilava3213
4 жыл бұрын
love bmw e36 love
@sergeygr
4 жыл бұрын
Nice one! But you had to put a gasket between threshold and side skirt (on top of inner edge).
@DailyDrivenE36
4 жыл бұрын
Fankie u can but u don’t have to, i think it looks cleaner without rubber molding but i did use same glue to creat black line between the car and side skirt and I think it looks a lot cleaner, but it’s just me.... Thanks for the comment 👍
@RbNetEngr
2 жыл бұрын
Why did you drill holes through the front bumper trim strips and install those big round fasteners?
@DailyDrivenE36
2 жыл бұрын
That’s a quick release, you know how you have to take bunch of screws and clips to take bumper off? so no I just press those “big round fasteners” and bumper is off 🤷🏻♂️
@jesusmalonso7179
3 жыл бұрын
Hello man, your car is awesome! I was wondering where you bought the cls type trunk spoiler. Thank u
@DailyDrivenE36
3 жыл бұрын
Thank you 🙏, i made it
@vakimovb
4 жыл бұрын
Мне показалось или играла русская музыка на заднем плане?) Что-то из машины времени?
@DailyDrivenE36
4 жыл бұрын
Владимир Акимов Нет не показалось 😁💪
@user-kr3bo3yx6u
3 жыл бұрын
Я на первых минутах раскусил , что Русский , )))) акцент выдал))). Тачка супер 👍🏻👍🏻👍🏻
@absteven
4 жыл бұрын
The AC control module unit may have broken, try to check on that.
@DailyDrivenE36
4 жыл бұрын
absteven i did, i have extra ac controller from my old m3 and i got one from pick and pull, still not working 😕, i got wire diagram from old data so will c if i can fined the problem
@absteven
4 жыл бұрын
@@DailyDrivenE36 I mean this .www.google.com/search?q=e36+%E5%86%B7%E6%B0%A3%E9%9B%BB%E8%85%A6&client=ms-android-asus-tpin&prmd=inv&sxsrf=ACYBGNSjHDTMi-fJWZ4bJv56O7uABVabyg:1577587399134&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiW2puE69nmAhVkL6YKHdiXBZ4Q_AUoAXoECAsQAQ&biw=320&bih=541#imgrc=DD-ZC4yaSL1QEM
@mrnajee1
4 жыл бұрын
your wheels are then not the same with or tires are not the same even if they say they are. Pieces closing the gaps between the wheel and hub are called "hud centric rings" just FYI
@ItalianMafioso344
4 жыл бұрын
My 1995 bmw 325is also did not come predrilled for sideskirts. How did you figure out where to drill the holes so that the side skirts would mount up properly? Nice video keep it up man.
@DailyDrivenE36
4 жыл бұрын
Warrior thanks, my 95 m3 did have oe side skirts so... 🤨 i started drilling but end-up using 3m window glue but i did drill the bottom, still holding good so....
@andrecasian4262
3 жыл бұрын
"wow there you go, magic... nahhh " 9:03
@juodaodisdiedukas
5 жыл бұрын
Which 3m glue did you use for the sideskirts?
@gernnylornsxlor8603
4 жыл бұрын
Nice car. Whats kit rear spat or rear diffuser you put on. I like, thinking doing the same thing for my car. Thanks
@DailyDrivenE36
4 жыл бұрын
Gernnylornsx Lor thanks, i made it like 2 years ago from aluminum laying around my house 😁
@sahroiromah1611
3 жыл бұрын
so nice i love e36
@Magicstockton
5 жыл бұрын
Subbed
@gaijin.3644
2 жыл бұрын
can you pls tell me what 3m adhesive you used btw good video
@DailyDrivenE36
2 жыл бұрын
Double sided 3m tape, get 3m tho... Works %100
@christianborresen9
3 жыл бұрын
cant go wrong with cip ties
@abrambam3331
4 жыл бұрын
My obd2 had clips for the side skirts but I got a 94 now so i guess this will not require clips lol
@andrejafercek3173
3 жыл бұрын
So... It is possible to change front grill without removing the lights???
@DailyDrivenE36
3 жыл бұрын
U r talking about the nose panel grills right? U can, just take top plastic cover off thats under the hood and u can get to the grill
@andrejafercek3173
3 жыл бұрын
@@DailyDrivenE36 yeah... Thank you very much!!! You just made my day, cause i was so mad about removing lights 😂😂😂😂😂😂. Thanks for video. 👆
@RijiGIO
4 жыл бұрын
კარგი მიდგომაა მომეწონა .)
@ArapBayraminOglu
4 жыл бұрын
How do I get the kit to blend in well with the color of a black e36 from 97? I’m afraid the kit is going to look to ‘new’ compared to the car’s paintjob making it ugly in overall sense.
@DailyDrivenE36
4 жыл бұрын
Can Oz If you are doing just bumpers and side skirts you don't have to blend the color as long as cars color looks good but if you are doing just door or fender or quoter panel than you might especially on 97, it will still look new but with time (2/3) weeks it will look ok, i had paint shop mix color by my car and not color code because its old car (color)
@ArapBayraminOglu
4 жыл бұрын
@@DailyDrivenE36 so it needs to be painted as well? They don't come in the desired color? Good to know! Thanks
@juanfelipecordero9465
3 жыл бұрын
Hello, in your video I could see that you put an iron under the bumper, can you tell me how you did it or where did you buy it?
@DailyDrivenE36
3 жыл бұрын
I got used one from the guy but u can get one online or DYI it, ez to make
@jkprod.4314
2 жыл бұрын
Is there a specific name for it ?
@nanatufuor4820
3 жыл бұрын
How do I get some to buy , the kit I mean
@benparsons99
4 жыл бұрын
Were the skirts genuine bmw? I bought some replica ones and the clips don’t line up so will probs have to do something similar to this
@DailyDrivenE36
4 жыл бұрын
Mines are OEM, I don't know about replica skirts but on OE skirts you can slide clips left or right to line up with the halls
@theterminfrator
4 жыл бұрын
Hey i live in Belgium so it's definitly going to rust if i drill holes like that, how can i prevent that from happening
@DailyDrivenE36
4 жыл бұрын
theterminfrator There is a bunch of different sealer’s and paint that you can use from preventing it from rust
@vakimovb
4 жыл бұрын
Привет, надо ли при установке климата перешивать комплектацию через инпу? Should i reflash the ecu to work with climate control?
@DailyDrivenE36
4 жыл бұрын
Владимир Акимов my AC still not working so i don’t know... its all connected and i have freon in it but... technically you shouldn’t have to program but i was told your idle will be off
@frogking64
3 жыл бұрын
Where did you get the sideskirts I've been looking for some myself
@DailyDrivenE36
3 жыл бұрын
From my donor car, 95 m3
@Magicstockton
4 жыл бұрын
How do you assemble the mesh grille piece? I have no idea how to get it to stay on. There’s no screw holes.
@DailyDrivenE36
4 жыл бұрын
Magicstockton u talking about the bumper grill right? Grill has halls and bumper has... its like pointy plastic screws (part of the bumper) and you use spacial washers but those things brake ez so your bumper might not have anymore especially if its used
@Magicstockton
4 жыл бұрын
Daily Driven E36 Oooohh. That’s those small washer with the teeth in them? Yeah, man, I just got a $140 eBay one and I’m assembling it. So basically I’m going to have to JB weld it... much appreciated. I subbed for a reason. 🏆
@lucmarinovich6815
3 жыл бұрын
Hey I was just wondering what the little black lip is you connected underneath the front bumper and where to buy it?
@DailyDrivenE36
3 жыл бұрын
Thats oem lip for m3 bumper
@lucmarinovich6815
3 жыл бұрын
Do you know where the best place to buy them is?
@DailyDrivenE36
3 жыл бұрын
@@lucmarinovich6815 aaaa... u can get them on ebay but get oem (has better fitment), are u local? I have one u can have it for free, might need to be painted but its oem
@lucmarinovich6815
3 жыл бұрын
@@DailyDrivenE36 oh yea that would be good but unfortunately I live in New Zealand
@AnthonyLivesTwice
Жыл бұрын
What did you use for the sealant?
@user-ot5yi3ye2j
8 ай бұрын
💞💞💞💞💞💞💞💞💞
@Magicstockton
5 жыл бұрын
🏆
@lovelrivas6999
4 жыл бұрын
Hey man what paint color is your e36
@carsinruin6102
4 жыл бұрын
Where did you get the skirts and bumper? Thanks.
@DailyDrivenE36
4 жыл бұрын
Samuel Hewson skirts from craislist and bumper i got for $20 from one guy at my work, but if u r looking for m3 bumper i would get one from ebay, its not OE but still good bumper and comes with everything
@carterhoopss
2 жыл бұрын
where did you get the kit?
@DailyDrivenE36
2 жыл бұрын
From my parts car
@milhailmartinez2224
3 жыл бұрын
What color match did you use??
@DailyDrivenE36
3 жыл бұрын
Fuel door, paint shop mixed it by matching it to fuel door
@floyd2993
3 жыл бұрын
name this rims is so 😻
@nyanthony3
4 жыл бұрын
What kind of glue did you use?
@DailyDrivenE36
4 жыл бұрын
Anthony Pinero 3m for the windshield
@rbrs1741
3 жыл бұрын
Where did you get the parts from ?
@DailyDrivenE36
3 жыл бұрын
Ebay, pick and pull, craigs... lol
@imSchwaggy
4 жыл бұрын
what rear diffuser is that?
@DailyDrivenE36
4 жыл бұрын
im Schwaggy home made lol 😆
@AlexThunderouse
5 жыл бұрын
where can i get this difusor ?
@DailyDrivenE36
5 жыл бұрын
PierreCardiny rear bumper diffuser? I made it 😁
@AlexThunderouse
5 жыл бұрын
@@DailyDrivenE36 nice one :D can you share measurements ?
@DailyDrivenE36
5 жыл бұрын
PierreCardiny there was no measuring tape involved in it LOL I made it all by just eyeballing it, i did talk about it in one of my videos how i made it but don’t remember in which one lol
@AlexThunderouse
5 жыл бұрын
@@DailyDrivenE36 understand :) thanks for replay, i ll find it.
@DailyDrivenE36
5 жыл бұрын
PierreCardiny i will be making new one, don’t know how soon but i wanna make one so if i take bumper off diffuser will stay on the car 😁
@luckyboi1196
5 жыл бұрын
What is the size of your tires?
@DailyDrivenE36
5 жыл бұрын
Lucky Boi11 215/45/17 front, i used 245/45/17 in the rear b4 but its same as front now 215/45/17 with 30mm spacers in the back
@luckyboi1196
5 жыл бұрын
So the 215/45/17 are look stretched? Cause i have the same style 5 as you
@DailyDrivenE36
5 жыл бұрын
Lucky Boi11 u can c difference in tires in this video and how stretched they r plus if u have m3 ull have to get spacers or grind front brake caliper plus my front fenders are rolled / rears have fender flares so i dont know if they fit without rolling your fenders
@DailyDrivenE36
5 жыл бұрын
Lucky Boi11 i have michelins upfront and pirellis in the rear same size 215/45/17 but michelins look stretched (not to bad) and pirellis dont but at the same time if i use pirellis upfront they will rub my fender even tho they are rolled so.... i can send you pic if you have instagram if you want
@luckyboi1196
5 жыл бұрын
Wow thankyou! But i have a E39, my IG is luckyjohnsuu
@wansirpunkuitm
5 жыл бұрын
what the rim jj btw?
@DailyDrivenE36
5 жыл бұрын
safwan jamian im not good with rim sizes and all that but i think what you are looking for is (8jx17h2) right?
@wansirpunkuitm
5 жыл бұрын
thanks...what tire you use before and after?i also have same situation , different tires stretch differently
Пікірлер: 100