Here's some weird things. The OMP logo used on your thumbnail is the old 1985-2008 logo, now used exclusively by fake eBay/Wish knockoffs. But the wheel is indeed a real OMP. (with the current logo and all) However it's not a Trecento, it's a "Racing GP" Part# OD/1981/NN ;)
@edmundkudrjavcevs3412
4 жыл бұрын
What is the gear stick it looks cool
@SuicideModsRacing
6 жыл бұрын
Thanks for the tutorial very well put together and informative. I'm probably correct in assuming your a brummie like me first thing I noticed the accent lol. Subscribed looking forward to watching some of your other videos. Right I'm off to fit mine to the StreetKA! Thanks again. Peace.
@MARKELKNIGHT
6 жыл бұрын
Suicide Mods no worries bud, glad you found it useful - hope your build goes well
@projectcars026
7 жыл бұрын
Have you thought a bought putting rs bonnet vents in? keep up good work
@MARKELKNIGHT
7 жыл бұрын
Project Cars02 I use to want them but not really my thing any more
@jodihughes7015
4 жыл бұрын
I don't know if you've already answered this but did you get the horn working? If so, did you have to splice into the yellow connector for it?
@MARKELKNIGHT
4 жыл бұрын
Yeah it works mate, the yellow wires are for the airbag, it's the black wire for the horn
@jodihughes7015
4 жыл бұрын
@@MARKELKNIGHT super, thanks man
@George-se9zc
5 жыл бұрын
Hi mate, how did you end up getting around the wiring harness not fitting through the boss in the end?? Cheers
@TheCrewriders
6 жыл бұрын
to cover quick realease, add a carbon fiber skin
@freshprince1504
6 жыл бұрын
Mind sending me the links to the wheel n boss?
@yourihiemstra5590
6 жыл бұрын
can someone give me the link of the wheel hub please
@projectcars026
7 жыл бұрын
How many miles in on your mk6 and do you think it's worth getting a zetec s with milltek exhaust for 2400
@MARKELKNIGHT
7 жыл бұрын
Project Cars02 the clocks say about 120k but the actual engine has only 68k and I'm not too sure I don't have any knowledge of miltek
@ABCD-hb5yn
4 ай бұрын
Did u manage to sort the air bag delete?
@MARKELKNIGHT
4 ай бұрын
I did in a sense, I just a sharpie to draw over the light 😂
@Scholle2204
5 жыл бұрын
which switch knob is that
@freshprince1504
6 жыл бұрын
You got the links for the snap off boss and wheel?
@jakesmith3135
7 жыл бұрын
What ohms/watts resistor did you buy after using the one supplied in the kit as swapping my steering wheel out on my fez in a couple of days and obviously don't want my airbag light on
@MARKELKNIGHT
7 жыл бұрын
Jake Smith I thinks that they were 10ohm
@jakeyje
6 жыл бұрын
Does doing all of this make the steering wheel feel a lot closer to you? Thinking of doing this but don’t want to be cramped behind the wheel
@MARKELKNIGHT
6 жыл бұрын
Jacob Evans all honesty I think it’s further away tbf mate, so I’m probably going to get a deeper dish wheel or a hub spacer
@jakeyje
6 жыл бұрын
MARKEL KNIGHT cheers mate just boughta mk6 myself and the steering wheel needs to go 👌
@biglez22
7 жыл бұрын
Have you got an aftermarket gearbox in? Where abouts did you get the extended gear stalk?
@MARKELKNIGHT
7 жыл бұрын
Nope, its just the standard gear box at the moment, and its a Mugen gear knob, there just very long gear knobs
@Isabella135i
6 жыл бұрын
What boss kit did you use, link?
@tomhumphries1782
7 жыл бұрын
Hi mate how would u use the air bag delete not sure how to do it
@MARKELKNIGHT
7 жыл бұрын
Alright bud, I'm not 100% sure because I thought I did it right but the light still goes off now
@eamicorb
7 жыл бұрын
Did the boss kit come with two airbag delete ? Or did you buy the other resistor ?
@MARKELKNIGHT
7 жыл бұрын
Eamicorb if only came with one, I brought 5 extra from eBay, it only costs around .99p
@eamicorb
7 жыл бұрын
MARKEL KNIGHT yeh that's what I done today suck that the kit only comes with one
@MARKELKNIGHT
7 жыл бұрын
Eamicorb I know yeah, hope yours goes well
@eamicorb
7 жыл бұрын
MARKEL KNIGHT yeh at least I'll have some left for the seat airbag and the seatbelt tensioner for when in put buckets in and mines on a mini track car
@MARKELKNIGHT
7 жыл бұрын
Eamicorb that's a shout tbf, I was just going to colour the air bag light in on my dash
@lukeknowles3892
6 жыл бұрын
How is the snap off kit holding up & do you still have a link please mate 👍🏻
@MARKELKNIGHT
6 жыл бұрын
Luke Knowles it’s ace mate, if you search for snap off boss on demon Tweeks you can’t miss it 👍🏽
@lukeknowles3892
6 жыл бұрын
Ain't they expensive on there mate?
@MARKELKNIGHT
6 жыл бұрын
I haven’t checked recently but if you just search on eBay there is a lot of variety
@lukeknowles3892
6 жыл бұрын
Ok will have a look now mate. Cheers 👍🏻
@JACKSPEED_TV
5 жыл бұрын
Hi pal how did you find that snap off wheel boss, any good? Also do you know the measurements? Cheers 👍
@MARKELKNIGHT
5 жыл бұрын
Hi mate the snap off adaptor is universal, I just brought it off ebay, but the steering boss is vehicle specific
@JACKSPEED_TV
5 жыл бұрын
@@MARKELKNIGHT Cheers pal 👍 Looking at getting one do you know how far it brings the wheel from the boss?
@MARKELKNIGHT
5 жыл бұрын
Yeah it's decent mate, id recommend spending the extra money and getting a better quality boss, and tbf it's not different off of oem
@JACKSPEED_TV
5 жыл бұрын
@@MARKELKNIGHT Cheers pal, thanks for the quick replys 👍 Subbed
@MARKELKNIGHT
5 жыл бұрын
@@JACKSPEED_TV thanks bud, appreciate it
@jacobwaters6842
4 жыл бұрын
What ohm resistor did you use bro?
@minecraftholo
3 жыл бұрын
I need answer too
@tigrarulez
5 жыл бұрын
Wheel diameter??
@phrophetc4126
4 жыл бұрын
Any links pls
@1188dale
6 жыл бұрын
👍🏿👊🏽
@Kenz1221
4 жыл бұрын
Might sound really daft asking but do you know how to disconnect the battery? I’ve not got a clue
@MARKELKNIGHT
4 жыл бұрын
Yeah mate I think it's 2 10mm bolts on the connectors and then the connectors will pull off
Пікірлер: 57