Nice job, as a machinist I give you props- those tiny drills and taps can be very tricky, especially freehand work. All you need to do with that first hole is grind the screw tip off until it can fully seat. Again, nice work!
@h4rry4x44
10 ай бұрын
Looks like he stripped the screw head.
@knifedelights7473
Жыл бұрын
I always like how you are not afraid to experiment on you knives. That was a pretty neat mod. Thanks for sharing, my friend.
@diverdave2179
Жыл бұрын
That is neat work! My only worry would be if the screws get loose over time. Thanks Mr. Barlow!
@nutbastard
Жыл бұрын
That's why you hit the threads with some red loctite. You can also tap the hole about 1 thread less so the screw bites into the metal, but that's a level of precision that would require a bit of trial and error.
@alpine1600s
Жыл бұрын
🙈 AVERT YOUR EYES MY FAITHFUL BUCK BROTHERS!🙈🤣
@bishop6426
Жыл бұрын
Well, Mr. Barlow, you did a really nice job…..and you’re the better man. I wouldn’t DARE to try that on my old 110. I’ve had it since the early 70’s and it would make my flesh crawl to perform surgery on it. 😀 But yours looks great. 👍
@KnifeChatswithTobias
Жыл бұрын
I'm sure quite a few people will love this but I am so averse to pocket clips on traditional knives. But then I have to admit, you did a good job with the clip. Be pretty cool if you could find a brass tone clip! Again great job.
@escapetherace1943
Жыл бұрын
yeah for this knife a sheath is better. Maybe even a thin pocket sheath with clip. No way I'd scar my Buck up like that
@jerseyknifeguy6382
Жыл бұрын
Dude your the man get over here and give me a high five……. To be honest with you I wouldn’t even thought you knew what a tap is you have to be a mechanic or carpenter!!!!!! I’m super impressed nice Job 👍
@Lex5576
Жыл бұрын
I might try to do this to both my Buck 110 and 112. The only reason I haven't been carrying those knives is because I despise belt carry. The sheath gets in the way of my cell phone holster, and just makes my belt look stupid busy. I might also try to put a belt clip on my Puma Sergeant, which is similarly styled as a Buck but a lot lighter.
@rickm5853
Жыл бұрын
Nice!! Hows it holding up?
@mistersmith3986
4 ай бұрын
Awesome job man 👍 I have a pocket clip by ZT that looks judt like the one you installed. Maybe I'll put it on my 110. Thanx for the video my Bladed Brother 👍 ⚔️ ✝️ 🇺🇲
@RandysWSG
Жыл бұрын
That came out cool!
@ericstarr9399
Жыл бұрын
What tap did you use? I assume the Civivi clip comes with metric screws.
@jdnotariano
Жыл бұрын
That is awesome!
@byronkennedy7912
Жыл бұрын
Nice mod for those who absolutely, positively, need a clip! (otherwise get a clip slip)
@rustyknifelover4463
Жыл бұрын
I would carry in a clip slip.
@zacharybennett5063
Жыл бұрын
What size tap did you use for the screw holes?
@alpine1600s
Жыл бұрын
I use a SMKW large slip for my hunter sized knives.
@brandonadkisson
Жыл бұрын
What size did you use to tap it?
@nitrorc4life1
Жыл бұрын
You did a nice job my friend and hopefully like it. From experience I don't as the buck 110 is hefty and do not like it shifts around in pocket alot due to weight,but worse part and why I do not carry in my pocket is that it is a pocket shredder due to weight in my experience so mine stays in a pouch/sheath of some sort, hope it works for ya.
@Addictbasterd
3 күн бұрын
Hell yeah
@rustyknifelover4463
Жыл бұрын
Well done Brother.
@mikecurtis2585
Жыл бұрын
Looks good! I not sure if I would like it! Looks like a great job!!
@clarkerettaliata1107
10 ай бұрын
What size bit did you use?
@terrillschneider3778
Жыл бұрын
Which color loktite did you use on the screws red or blue
@alpine1600s
Жыл бұрын
Spiral or helical flute taps can thread deeper without having to drill as deep for commonly known as a gunner or straight flute tap.
@michaelperry3830
4 ай бұрын
What size tap?
@matthebert7453
Жыл бұрын
I agree, if they offered the 110 with a belt clip I would buy one..
@TheSomervilleKid
Жыл бұрын
Awesome video … especially for us lefties who can’t use those great knives that are right hand carry only… can I ask what drill bit size and tap you used for those t8’s? Thanks!
@jessej22
Жыл бұрын
What size tap is needed!
@thegreatoutdoors2000
Жыл бұрын
Lovely.
@Elphoenix1
Жыл бұрын
I think I will try it on a Rough rider first
@michaeldalbis4631
4 ай бұрын
How about the 55? :-)
@TheRydog61
9 ай бұрын
Don"t belt carry put in your back pocket
@KungFuTweety1
Жыл бұрын
You can also get the thumbstuds...
@jillianmendez6148
Жыл бұрын
👊 "Promo sm"
@jamesaritchie1
Жыл бұрын
That is a crime against nature. It's a horrible thing to do to a 110.
@davidstrickler6570
11 ай бұрын
Pocket clips blong on ink pens. Not knives.
@TheHeroRises
6 ай бұрын
Your workmanship is excellent… but jeez man! You’ve destroyed a work of art. You do not paint over The Mona Lisa with glow-in-the-dark paint because you like keeping your lights low. Yikes. Good vid though.
@151ncoke
6 ай бұрын
If the clip was brass colored, it would be perfect.
Пікірлер: 42