I can’t thank you enough for this video! The supplied instructions are catastrophic. From the misspellings (“two inches from the button”) to the lack of detail and clarity, they are practically worthless. You clarified everything including the flexibility in positioning the mounting plate based on desired clearance and the need to rotate the wheels to achieve proper vertical lifting force. Thank you!
@TigerCreekFarm
2 жыл бұрын
Glad it helped!
@ekhoromeo
Ай бұрын
Thanks for the info, i appreciate the wheel turning tip! ... now ill make the adjustments to my work bench! Again, thanks a bunch.
@DIYflorida
2 жыл бұрын
Thanks for the video! I was looking for something retractable for a project that my wife can move by herself and this looks like the answer
@9011combo
3 жыл бұрын
Thank you for the great video. I hear you just fine, i don't understand why the others comment about the audio.
@lexitejeda6209
Жыл бұрын
This video is very helpful. The very terrible instructions that came with mine state to mount the plate 1.4" from the floor for a 3/4" rise. So your suggestion of 1.75" for a lower rise works for me; nevertheless, other commenters pointing out that increasing this dimension gives a lower rise and vice versa helped clear things up. And I know from experience to pretty much never use provided hardware. I will use my own flat head wood screws for the mounting plate. Thank you!
@daviddyche3045
Жыл бұрын
at least you got instructions, me no f#$$ing instructions
@BellyUpFishGarage
3 жыл бұрын
I can hear you just fine and I'm listening through one ear bud with mega tinitus.. I dunno what all these other guys are complaining about...
@TigerCreekFarm
3 жыл бұрын
Thanks - good to know. I didn’t know what the problem was.
@oldaussieadventures3072
2 жыл бұрын
Thanks mate for the video. My set didn't come with instructions and this helped me a lot.
@TigerCreekFarm
2 жыл бұрын
Glad it helped
@arobertpetersen
3 жыл бұрын
Finding your channel is serendipity as I have some classic (delta) woodworking tools that are all cast iron and hundreds of pounds each.
@TigerCreekFarm
3 жыл бұрын
These have proven to be very helpful.
@ginoasci2876
2 жыл бұрын
if you only move cabinets on occasion, just purchase one set of those, then purchase just the mounting plates for the other cabinets. remove the casters from one and with those pins, and quickly install them in another cabinet. so all your cabinets will have only the mounting plates and one with the whole set up.
@TigerCreekFarm
2 жыл бұрын
Excellent idea.
@gmcguy
3 жыл бұрын
Huge thanks for sharing this-- been looking for such an idea
@GeorgeNadaYT
7 ай бұрын
I bought these exact same one. I wish they would have supplied a templet. Some of these come with temples to show you exactly where to predrill the holes.
@jayse63amg31
3 жыл бұрын
I just got some of these workbench casters. Thank you for the info.
@TigerCreekFarm
3 жыл бұрын
Great. Hope they work out for you.
@leopinzon8423
3 жыл бұрын
A million Thanks man! this video helped out a lot
@TigerCreekFarm
3 жыл бұрын
Glad it helped!
@williamhanna5224
Жыл бұрын
Excellent !
@h.collier3544
3 жыл бұрын
Great video. Would like to see how it works when you release the casters. Does the equipment slam to the floor, or can you control the descent?
@TigerCreekFarm
3 жыл бұрын
I have mine no more than 1/4” high and they are released back down one at a time. I have never experienced a problem or any slamming.
@h.collier3544
3 жыл бұрын
@@TigerCreekFarm good to know, thanks for the reply.
@stein_hund-wow3022
10 ай бұрын
I bought this set but was unable to slide the castor plate into the mounting plate. The rounded head of the screws they provided did not allow for enough clearance… even with the screws aligned with the chamfered hole. So I will either have to use flathead screws or mount the castors directly to the leg… which defeats the purpose of having them removable.
@TigerCreekFarm
10 ай бұрын
I would contact them and make them aware of the problem. Perhaps they will remedy the situation.
@Anyone700
2 жыл бұрын
If 2" gives 3/4 in lift, how does putting the wheels closer the floor decrease lift? You are giving it less travel before it hits the floor, making it raise higher...
@TigerCreekFarm
2 жыл бұрын
You are correct. That is what we call a "senior moment". Thanks for pointing that out.
@MD-md4th
Жыл бұрын
Great video! I am a little confused - wouldn’t lowering the mounting holes by 1/4” raise the final level by 1/4”?
@TigerCreekFarm
Жыл бұрын
You're absolutely correct. I had a stupid moment - recorded for perpetuity. I should not have been relying on the measurements from the base of the speed square - they start from inside the base. Even so, good catch and thanks for pointing it out and keeping me straight.
@lexitejeda6209
Жыл бұрын
To keep these from sticking out on both sides of the workbench, is there any reason I should not install the front 2 casters on the insides of the legs (so they are out of the way), and the back 2 on the forward-facing side of the legs (so that I can reach them)?
@TigerCreekFarm
Жыл бұрын
As long as it doesn't get off balance or top heavy I don't see why it should matter.
@BUDDYLOVE8914
2 жыл бұрын
How can I purchase more of the mounting plates? That way I could mount multiple sets of plates on my equipment and move the casters around to the equipment that needs moving. So 3 pieces of equipment = 3 sets of mounting plates and one set of 4 casters. Where can I find more plates?
@TigerCreekFarm
2 жыл бұрын
Good idea. My thought would be to follow the link in the description and find contact information for the manufacturer. Perhaps they can sell you extra plates.
@gacdrums6685
2 жыл бұрын
I have a question ? I’m just seeing your video about these casters and I was wondering if you think they would work on my gun safe , ? Being that it has a steel body and not a wooden frame….. I’m not sure how thick the walls are and I may have to get longer bolts … the safe doesn’t weigh as much as your oven , it’s probably 300 lbs ? Thanks GAC
@TigerCreekFarm
2 жыл бұрын
Should do a good job. The only question is drilling the holes (thickness/hardness).
@gacdrums6685
2 жыл бұрын
@@TigerCreekFarm thank you
@Atlanta83
4 жыл бұрын
nice
@pancakeyummy4070
3 жыл бұрын
What will i do if the wheel of the bed is loosen to its bearings .. is there any remedy for that or just buy a new one?? Thanks
@TigerCreekFarm
3 жыл бұрын
If it was a new purchase I would return it for a replacement.
@pancakeyummy4070
3 жыл бұрын
@@TigerCreekFarm no it's not a new purchase.. it's used to be the wheel of my grandma's adjustable bed
@TigerCreekFarm
3 жыл бұрын
I don't believe that any repair you attempt to do on casters will last - since the fatigue in the metal is causing it to fail. Best and safest bet is to purchase a new one.
@pancakeyummy4070
3 жыл бұрын
@@TigerCreekFarm Ok thank you for the suggestion ☺ .. have a great day
@pancakeyummy4070
3 жыл бұрын
@@TigerCreekFarm Ok thank you for the suggestion ☺ .. have a great day
@stevespencer5158
4 жыл бұрын
What kind of screws did you use to mount the plate and how did you drill the holes?
@TigerCreekFarm
4 жыл бұрын
You should use a flat head/ tapered head wood screw so it sits into the chamfered recess in the plate. I believe I used 1/4 x 20 about an inch long. Just line the plate up where it needs to be, mark the holes then drill a 1/8” hole.
@stevespencer5158
4 жыл бұрын
@@TigerCreekFarm Thanks for the quick reply, I thought they were wood screws but have never seen them used in metal like that. Thanks again.
@richardnewcomb9471
3 жыл бұрын
It appears that TCF used "(JIS) Pan Headed" screws (i.e. - 'Phillips Round Head Pan' as opposed to the '[ANSI] Flat Head Pan' screws) not flathead screws which I agree should have been used.
@dustybottoms3834
3 жыл бұрын
Can’t hear you
@irondiver292
2 жыл бұрын
Audio is way too low
@TigerCreekFarm
2 жыл бұрын
Thanks. This is a problem we were made aware of and have solved it on subsequent videos.
@irondiver292
2 жыл бұрын
@@TigerCreekFarm wouldn’t have said anything if everything else wasn’t dang good
@TigerCreekFarm
2 жыл бұрын
@@irondiver292 I appreciate the comment. It helps me to do a better job.
@richardnewcomb9471
3 жыл бұрын
For crying-out-loud man - figure out what you are going to say before you start recording and quit fumbling around with the product so we can focus on it! There are so many contradictions in what you are saying that most newbies would totally NOT grasp the concepts you are trying to portray. i.e. - Lowering the mounting location will RAISE the component cabinet more when the lift mechanism is engaged - NOT LESS. Sheesh!
@TigerCreekFarm
3 жыл бұрын
Thanks for taking time to comment.
@russhellmy
3 жыл бұрын
the Audio is TERRIBLE. cant hear anything you are saying
Пікірлер: 59