Quick question what did you do with the egr tube that connected to the old exhaust manifold
@unclelemme
Күн бұрын
I plugged the port and used headers. If yer gunna reuse the stock manifolds and block off the egr . I’d remove it(cut it off) the tube and weld or plug it shut. Hope that helps!
@user-hm2pz8ro9v
Күн бұрын
@@unclelemme I got similar ones from eBay and the port was too short for the egr line hose it came with a cap for the headers but not the egr line so you are saying I leave the egr line connected at the egr and just cap off to where it goes to the new headers it run fine ? No codes or it running off ? Thank you for responding many ppl do not like to help with these questions
@unclelemme
Күн бұрын
@user-hm2pz8ro9v Hey no problem! Just remove the line all together. I used a 3/4 or 1”NPT fitting. I used a (pipe fitting plug) in the intake side. Because of headers you’ll want to trick your upstream O2 sensors. Just the front ones. You just need an O2 adapter, you’ll find em on EBay too. It will move the O2 out farther so it’ll read better. Also you can stack the O2 bungs together, you can see it in my (Secret NASCAR trick video) you don’t have to do the evacuation system like I do. Feel free to ask questions anytime!
@unclelemme
Күн бұрын
@user-hm2pz8ro9v hey also you’ll want to plug the hole in the header. Mine came with a plug. If not take the header to a muffler shop and they’ll get you a plug.👍
@user-hm2pz8ro9v
Күн бұрын
@@unclelemme thank you for the information brother so with all this you still don’t get a code or a check engine light?
Пікірлер: 9