Just installed the 4.5 in BAM sticks with zombie baffles on my 2017 road glide. Absolutely love the look and sound. So much better than the Vance and Hines mufflers that were on it
@jasonbreedlove495
2 жыл бұрын
Hear ya! Ditching the Cobras on my 21 RKS for 4.5 Tabs
@BamafaithfulRollTide
Жыл бұрын
Just curious why did u choose those over the 50cal?
@jasonbreedlove495
2 жыл бұрын
Dig it. Bullseye bagger bracket is a great piece. Pipes are killer man.
@Klock37
2 жыл бұрын
Sounds amazing!!
@BrewTownBiker
2 жыл бұрын
Had the 4 1/2 on passed bikes, ordered 22 RG special today, might do the 5👍
@TABPerformance
2 жыл бұрын
Good choice! You won't be disappointed.
@timnevitt2993
Жыл бұрын
ordered a 22 rgs a month and half ago should be in soon will be putting tabs on for sure
@2Tall03XX
Жыл бұрын
I got the 4.5 BAM sticks on my 2018 Road Glide Special. It’s awesome!
@geraldgoodiii6993
2 жыл бұрын
Ammmnnd I just got the 4” BAM SHIT
@sladetomic9089
2 жыл бұрын
Gonna have to wait for $ to buy a tuner, but can't wait until I get some of these for my bike.
@ardyrides834
2 жыл бұрын
I'm holding out for the 6" slip-ons.
@jimmyburch2052
2 жыл бұрын
I have tab zombies for awhile I luv them.ibseen y'all at the lonestar ralley this year my daughter first bike owner bought the bzombies for her sporster she luvs them.great company and great emplyees
@TABPerformance
2 жыл бұрын
That is awesome! Love hearing stories like this.
@jimmyburch2052
2 жыл бұрын
The videos dont do the zombies justice .they are loud and sound great .most bikes you need a header and mufflers to sound this good .just get the zombies and thats it .people can save money
@warrior3738
Жыл бұрын
just got my 50cals w/zombies. installing them tomorrow
@TABPerformance
Жыл бұрын
Love it!
@TABPerformance
Жыл бұрын
Just in Time for Halloween Zombie Ride!
@Poseidonsreef
2 жыл бұрын
I have bought tab performance for both my bikes sport glide and road king I first want to say on this last install for my roadking I did today the clamps were really tight and very hard to work on, and I’m getting exaust leak on the right side I’ve tried working the clamp in different positions and I’m still getting a leak I believe I can feel the heat by my leg very frustrating and about to spend the money to bring it to Harley for them to correct my work
@Poseidonsreef
2 жыл бұрын
Wish it was easier
@TABPerformance
2 жыл бұрын
You can use Permatex copper that works very well on an exhaust joint. If the clamps were difficult to get on it could also be that they are stretched and may not be tightening down fully. 9 out of 10 times we install mufflers the clamps can be reused, but occasionally one that is over torqued or just to many times being thermal cycled they can need replacing.
@robertrubino9386
Жыл бұрын
Ugh, I was just about to buy the 50 cals for my 2020 Cvo street glide but I’m getting 13” ohlins with Kraus 1” extension. Is there any way to get this to work?
@TABPerformance
Жыл бұрын
We can't guarantee you would be able to get it to bolt right on. We have done a few installs on our own stuff where we have had clearance issues and had to put a towel over the coating and make a relief dent etc. I think if you are inclined enough, most of your issues are under bag, and can probably find a solution with some amount of fab expertise, but if you are looking for a straight bolt on guarantee, you would need to find a dealer that stocks the pipes to see if they would fit or go down in size.
@DavidSmith-wd4wg
2 жыл бұрын
How do these compare with the 4” tabs with zombie baffles. I have them now but 50 cals are alot of money if theres no significant sound increase or tone. Kind of the reson I didnt go for the 4.5s when they came out
@TABPerformance
2 жыл бұрын
David, you are absolutely correct, it is mainly a visual difference like the 4.5. You do get a slightly deeper note especially when using louvered baffles, but the zombies are pretty darn similar.
@gadang66
2 жыл бұрын
Thanks for the video! How well will that work when you have a extended fender or the AdvanBlack CVO and Dominator fenders? Thanks again!
@TABPerformance
2 жыл бұрын
Honestly not sure yet, the fender extensions could get tight, our muffler is about 5.25" in true diameter so best bet would be to measure your gap. With the bullseye bagger brackets you should have enough movement around the hole to center it and then you would need to decide if you are comfortable with that tight of a fit based on your build. I hope that helps.
@charlesgreer2847
2 жыл бұрын
Is there any video of these slip ons with the baffles out
@TABPerformance
2 жыл бұрын
We don't recommend non-baffled for tuning issues, so we don't have sound clips on this set-up.
@jeremyboutilier8944
2 жыл бұрын
I have an 08 Street Glide putting Hogworkz 4” stretched bags and keeping my stock rear fender for now!! Am strongly considering the 50 cal zombies to replace my Python slip on’s that are discontinued!! Any thoughts or suggestions??
@TABPerformance
2 жыл бұрын
We haven't tried the 50 cals with that specific bag, but it looks similar to the Advan bags. You will want to get the bullseye bagger bracket with them to adjust the pipe hang point to center them up and make sure it fits.
@johnnybravo2985
11 ай бұрын
I have a 23' RK special, with 5" extended hardbags and an Advanblack extended fender facia, if I purchase these and I cannot get them to work, will I be able to exchange them for the 4 1/2 size?
@TABPerformance
11 ай бұрын
Hello, you can return product if it is unused, so you can slide it on carefully if you mask the coating and don't clamp it on, just to see if it will fit, but it must be returned in unused "as new" condition to get a refund. We don't do exchanges, you would just return the 50 Cal set, get a refund less the cost of shipping both directions and then order the 4.5s. I have copied our return policy here. www.tabperformance.com/returns.asp I might suggest that you look to find a dealer in the area that carries stock and see if they'd let you try both.
@2tiresdown
7 ай бұрын
They fit my bike with the same setup with an air ride installed so I’m sure they will fit with enough room so they don’t melt your bags. Good luck 🍀
@2tiresdown
8 ай бұрын
Will the 50 cal pipes fit if I have a iride suspension on a 2023 street glide ST? Thank you
@TABPerformance
8 ай бұрын
We can't guarantee fitment with all air rides, but we have put it on quite a few of them and with the bullseye bagger brackets it helps be able to adjust everything to work.
@2tiresdown
7 ай бұрын
@@TABPerformance just wanted to update you guys in case someone ask. The pipes fit perfect with the iRide and stretched bags. They fit as just slip ons and with the tab 2-1-2 headers. I tried then as slip ons and then said screw it and tackled the header install which I was a little apprehensive about at first but turned out perfect. Thank you guys. Do you name the Torc cones in bronze by any chance? I don’t think so but worth a shot asking. If not can they be painted bronze? Thanks again for all the help you have a customer for life.
@TABPerformance
7 ай бұрын
Hey there, it is just bare machined aluminum so it can be painted any color. Now, typically we see the parts are in direct exhaust gas path which is a corrosive and dirty/hot environment so I can't guarantee any colored coating will hold up to the heat and corrosive nature of the exhaust path, but if you want to try and probably touch up here and there, you are welcome to give it a go.
@2tiresdown
7 ай бұрын
Ok nice I will order a set then thank you for getting back
@PackersFlip
2 жыл бұрын
Will having a 107 - 114 - 117 make a difference on how loud these 50 Cal sound ? I have 114 but most videos I've seen with these 50 Cal are on 117s or 131 so they sound really loud. Will my 114 stock Road Glide Special sound just as loud ?
@TABPerformance
2 жыл бұрын
The motor will make a difference, the 114 will not sound like a 131, but it will still sound really good compared to other slip-ons for being loud and deep.
@stachethompson6530
2 жыл бұрын
Is that a stock head pipe with cats?
@TABPerformance
2 жыл бұрын
No that is this header. www.tabperformance.com/touring-fl-17-up-exhaust-head-pipe-2-into-2-p/2017-up-h-d-2-2-full-head-pipe.htm
@TABPerformance
2 жыл бұрын
It also has this Cam. www.tabperformance.com/product-p/red-shift-cam-kit.htm
@MrMurphc13
6 ай бұрын
Thats a 'cammed bike'?
@TABPerformance
6 ай бұрын
Yes this one has the RS468
@MrMurphc13
6 ай бұрын
@TABPerformance It'd be a bit more up front to put that info in the heading or description.Otherwise some people might think a slip on alone can sound like this.
@josedeltoro7453
2 жыл бұрын
Is that sound on a stock bike with the zombie baffles?
@TABPerformance
2 жыл бұрын
Sorry no, that clip is coming where we compare all baffle and all diameter slip-ons for both the built bike and a stock bike. The one in this video is a 114 motor with our 2:2 header, zombie intake, RS 468 cam kit from Zippers, and an Upgraded Oil Pump and cam plate from Feuling. So it isn't a crazy build but cams and header do make a big difference.
@josedeltoro7453
2 жыл бұрын
@@TABPerformance is there a difference in sound between the 4.5” with zombie baffles vs the 5” or is it just for looks?
@geraldgoodiii6993
2 жыл бұрын
@@TABPerformance OMG THE RIDE BY !!! Cam and head pipes makes insane difference Dude I want these to deepen up my ride I got the 4” zombies and wish I did the 4.5 They’d prolly look ridiculous on my FLHR tho
@TABPerformance
2 жыл бұрын
The 5" is a hair deeper note. We will have a comp video up soon. Working on all the combos.
@joshparkey2018
2 жыл бұрын
Will this fit a 22 Indian Challenger without having to modify any?
@TABPerformance
2 жыл бұрын
No, we do have pipes for that model with the same baffle options, but this specific one is for the Harley Touring models.
@joshparkey2018
2 жыл бұрын
@@TABPerformance Oh ok Thanks for the reply!
@willielewis2548
2 жыл бұрын
Can I use these on a 2022 street bob?
@TABPerformance
2 жыл бұрын
Unfortunately no, but we do have an option on the 2022 street bob with the same baffle options. www.tabperformance.com/harley-softail-long-chrome-exhaust-pipe-mufflers-p/131-1291.htm
Пікірлер: 57